mirror of
https://github.com/STMicroelectronics/STM32CubeF4.git
synced 2025-05-03 22:17:07 +08:00
84 lines
4.1 KiB
Plaintext
84 lines
4.1 KiB
Plaintext
/**
|
|
@page ADC_RegularConversion_Interrupt conversion using interrupt
|
|
|
|
@verbatim
|
|
******************** (C) COPYRIGHT 2017 STMicroelectronics *******************
|
|
* @file ADC/ADC_RegularConversion_Interrupt/readme.txt
|
|
* @author MCD Application Team
|
|
* @brief Description of the ADC RegularConversion interrupt example.
|
|
******************************************************************************
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
@endverbatim
|
|
|
|
@par Example Description
|
|
|
|
How to use the ADC in interrupt mode to convert data through the HAL API.
|
|
|
|
The ADC1 is configured to convert continuously ADC_CHANNEL_10.
|
|
|
|
Each time an end of conversion occurs an interrupt is generated and the converted
|
|
data of ADC1 DR register is affected to the uhADCxConvertedValue variable in the
|
|
ADC conversion complete call back function.
|
|
|
|
In this example, the system clock is 180MHz, APB2 = 90MHz and ADC clock = APB2/4.
|
|
Since ADC1 clock is 22.5 MHz and sampling time is set to 3 cycles, the conversion
|
|
time to 12bit data is 12 cycles so the total conversion time is (12+3)/22.5= 0.66us(1.5Msps).
|
|
|
|
User can vary the ADC_CHANNEL_10 voltage by applying an input voltage on pin3 connector 9
|
|
(connected to PC.00).
|
|
|
|
The converted value is monitored through debugger: uhADCxConvertedValue variable.
|
|
|
|
STM32 Nucleo board's LEDs can be used to monitor the transfer status:
|
|
- LED2 is ON when there are an error in initialization.
|
|
|
|
@par Directory contents
|
|
|
|
- ADC/ADC_RegularConversion_Interrupt/Inc/stm32f4xx_hal_conf.h HAL configuration file
|
|
- ADC/ADC_RegularConversion_Interrupt/Inc/stm32f4xx_it.h DMA interrupt handlers header file
|
|
- ADC/ADC_RegularConversion_Interrupt/Inc/main.h Header for main.c module
|
|
- ADC/ADC_RegularConversion_Interrupt/Src/stm32f4xx_it.c DMA interrupt handlers
|
|
- ADC/ADC_RegularConversion_Interrupt/Src/main.c Main program
|
|
- ADC/ADC_RegularConversion_Interrupt/Src/stm32f4xx_hal_msp.c HAL MSP file
|
|
- ADC/ADC_RegularConversion_Interrupt/Src/system_stm32f4xx.c STM32F4xx system source file
|
|
|
|
@par Hardware and Software environment
|
|
|
|
- This example runs on STM32F429xx devices.
|
|
|
|
- This example has been tested with NUCLEO-F429ZI Rev B board and can be
|
|
easily tailored to any other supported device and development board.
|
|
|
|
@par How to use it ?
|
|
|
|
In order to make the program work, you must do the following :
|
|
- Open your preferred toolchain
|
|
- Rebuild all files and load your image into target memory
|
|
- Run the example
|
|
|
|
* <h3><center>© COPYRIGHT STMicroelectronics</center></h3>
|
|
*/
|