STM32CubeF4

/**
  @page ADC_RegularConversion_Interrupt conversion using interrupt

  @verbatim
  ******************** (C) COPYRIGHT 2017 STMicroelectronics *******************
  * @file    ADC/ADC_RegularConversion_Interrupt/readme.txt 
  * @author  MCD Application Team
  * @brief   Description of the ADC RegularConversion interrupt example.
  ******************************************************************************
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  @endverbatim

@par Example Description 

How to use the ADC in interrupt mode to convert data through the HAL API.

The ADC1 is configured to convert continuously ADC_CHANNEL_10.

Each time an end of conversion occurs an interrupt is generated and the converted 
data of ADC1 DR register is affected to the uhADCxConvertedValue variable in the 
ADC conversion complete call back function.

In this example, the system clock is 180MHz, APB2 = 90MHz and ADC clock = APB2/4. 
Since ADC1 clock is 22.5 MHz and sampling time is set to 3 cycles, the conversion 
time to 12bit data is 12 cycles so the total conversion time is (12+3)/22.5= 0.66us(1.5Msps).

User can vary the ADC_CHANNEL_10 voltage by applying an input voltage on pin3 connector 9
(connected to PC.00).

The converted value is monitored through debugger: uhADCxConvertedValue variable.

STM32 Nucleo board's LEDs can be used to monitor the transfer status:
  - LED2 is ON when there are an error in initialization.

@par Directory contents 

  - ADC/ADC_RegularConversion_Interrupt/Inc/stm32f4xx_hal_conf.h    HAL configuration file
  - ADC/ADC_RegularConversion_Interrupt/Inc/stm32f4xx_it.h          DMA interrupt handlers header file
  - ADC/ADC_RegularConversion_Interrupt/Inc/main.h                  Header for main.c module  
  - ADC/ADC_RegularConversion_Interrupt/Src/stm32f4xx_it.c          DMA interrupt handlers
  - ADC/ADC_RegularConversion_Interrupt/Src/main.c                  Main program
  - ADC/ADC_RegularConversion_Interrupt/Src/stm32f4xx_hal_msp.c     HAL MSP file 
  - ADC/ADC_RegularConversion_Interrupt/Src/system_stm32f4xx.c      STM32F4xx system source file

@par Hardware and Software environment 

  - This example runs on STM32F429xx devices.
  
  - This example has been tested with NUCLEO-F429ZI  Rev B board and can be
    easily tailored to any other supported device and development board.

@par How to use it ? 

In order to make the program work, you must do the following :
 - Open your preferred toolchain 
 - Rebuild all files and load your image into target memory
 - Run the example

 * <h3><center>&copy; COPYRIGHT STMicroelectronics</center></h3>
 */