2.6 KiB
Raspberry Pi
The Raspberry Pi is an inexpensive and popular ARM based single board computer with digital & PWM GPIO, and i2c interfaces built in.
The Gobot adaptor for the Raspberry Pi should support all of the various Raspberry Pi boards such as the Raspberry Pi 3 Model B, Raspberry Pi 2 Model B, Raspberry Pi 1 Model A+, Raspberry Pi Zero, and Raspberry Pi Zero W.
We recommend updating to the latest Raspian Jessie OS when using the Raspberry Pi, however Gobot should also support older versions of the OS, should your application require this.
For more info about the Raspberry Pi platform, click here.
You would normally install Go and Gobot on your workstation. Once installed, cross compile your program on your workstation, transfer the final executable to your Raspberry Pi, and run the program on the Raspberry Pi as documented here.
How to Install
go get -d -u gobot.io/x/gobot/...
How to Use
The pin numbering used by your Gobot program should match the way your board is labeled right on the board itself.
package main
import (
"time"
"gobot.io/x/gobot"
"gobot.io/x/gobot/drivers/gpio"
"gobot.io/x/gobot/platforms/raspi"
)
func main() {
r := raspi.NewAdaptor()
led := gpio.NewLedDriver(r, "7")
work := func() {
gobot.Every(1*time.Second, func() {
led.Toggle()
})
}
robot := gobot.NewRobot("blinkBot",
[]gobot.Connection{r},
[]gobot.Device{led},
work,
)
robot.Start()
}
How to Connect
Compiling
Compile your Gobot program on your workstation like this:
$ GOARM=6 GOARCH=arm GOOS=linux go build examples/raspi_blink.go
Use the following GOARM values to compile depending on which model Raspberry Pi you are using:
GOARM=6 (Raspberry Pi A, A+, B, B+, Zero)
GOARM=7 (Raspberry Pi 2, 3)
Once you have compiled your code, you can upload your program over the network from your host computer to the Raspi
$ scp raspi_blink pi@192.168.1.xxx:/home/pi/
and then SSH to your Raspberry Pi
$ ssh pi@192.168.1.xxx
and execute it on the Raspberry Pi itself with
$ ./raspi_blink
Enabling PWM output on GPIO pins.
For extended PWM support on the Raspberry Pi, you will need to use a program called pi-blaster. You can follow the instructions for pi-blaster install in the pi-blaster repo here: