mirror of
https://github.com/STMicroelectronics/STM32CubeF7.git
synced 2025-05-03 22:17:13 +08:00
/**
@page BSP Example on how to use the BSP drivers
@verbatim
******************************************************************************
* @file BSP/readme.txt
* @author MCD Application Team
* @brief Description of the BSP example.
******************************************************************************
* @attention
*
* Copyright (c) 2016 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
@endverbatim
@par Example Description
This example provides a description of how to use the different BSP drivers.
At the beginning of the main program the HAL_Init() function is called to reset
all the peripherals, initialize the Flash interface and the systick.
Then the SystemClock_Config() function is used to configure the system clock
(SYSCLK) to run at 216 MHz.
This example shows how to use the different functionalities of components
available on the board by switching between all tests using user button.
#### LCD ####
This example shows how to use the different LCD features to display strings
with different fonts, to display different shapes and to draw a bitmap.
#### Touchscreen demo1 ####
Use touchscreen functionality to select or activate colored circle inside a rectangle.
#### Touchscreen demo2 ####
Use touchscreen functionality to select 2 touch points, their positions will be
captured and displayed on the LCD.
#### Touchscreen demo3 ####
Use touchscreen functionality to select or activate one square in a grid and colore it.
#### LOG ####
This example show how to use the LCD log features.
#### PSRAM ####
This example shows how to use the IS66WV51216EBLL-55BLI PSRAM features(read/write/erase..).
#### PSRAM DMA ####
This example shows how to use the IS66WV51216EBLL-55BLI PSRAM features(read/write/erase..) in DMA mode.
#### QSPI ####
This example shows how to erase, write to and read from the external MX25R6435F Macronix
flash memory using QSPI communication.
#### AUDIO PLAY ####
This example shows how to play an audio file through the I2S peripheral
using the external codec WM8994 implemented on the STM32723E-DISCOVERY board. The I2S input
clock, provided by a dedicated PLL (PLLI2S), is configured initially to have an audio
sampling frequency at 48 KHz. The audio data is stored in the internal flash memory
(4 channels, 16-bit, 48 KHz). Following the instruction on the display, stream can be
paused and resumed, volume can be changed and sample frequency can be changed.
LED6(GREEN) remains toggling while no example is running.
At the end of all examples when pushing the user-button the application loops
to the beginning (first examples).
@note Care must be taken when using HAL_Delay(), this function provides accurate delay (in milliseconds)
based on variable incremented in SysTick ISR. This implies that if HAL_Delay() is called from
a peripheral ISR process, then the SysTick interrupt must have higher priority (numerically lower)
than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
To change the SysTick interrupt priority you have to use HAL_NVIC_SetPriority() function.
@note The application need to ensure that the SysTick time base is always set to 1 millisecond
to have correct HAL operation.
@par Keywords
BSP, LCD, Touchscreen, PSRAM, DMA, QUADSPI, Erase, Read, Write, Audio play, Record, MEMS, Audio Codec, DFSDM,
I2S, Microphone, Headphones
@Note<74>If the user code size exceeds the DTCM-RAM size or starts from internal cacheable memories (SRAM1 and SRAM2),that is shared between several processors,
<20><><A0><A0><A0>then it is highly recommended to enable the CPU cache and maintain its coherence at application level.
<0A><><A0><A0><A0><A0>The address and the size of cacheable buffers (shared between CPU and other masters) must be properly updated to be aligned to cache line size (32 bytes).
@Note It is recommended to enable the cache and maintain its coherence, but depending on the use case
<0A><><A0><A0><A0> It is also possible to configure the MPU as "Write through", to guarantee the write access coherence.
<0A><><A0><A0><A0><A0>In that case, the MPU must be configured as Cacheable/Bufferable/Not Shareable.
<0A><><A0><A0><A0><A0>Even though the user must manage the cache coherence for read accesses.
<0A><><A0><A0><A0><A0>Please refer to the AN4838 <20>Managing memory protection unit (MPU) in STM32 MCUs<55>
<0A><><A0><A0><A0><A0>Please refer to the AN4839 <20>Level 1 cache on STM32F7 Series<65>
@par Directory contents
- BSP/Src/main.c Main program
- BSP/Src/system_stm32f7xx.c STM32f7xx system clock configuration file
- BSP/Src/stm32f7xx_it.c Interrupt handlers
- BSP/Src/lcd.c LCD drawing features
- BSP/Src/touchscreen.c Touch Screen features
- BSP/Src/log.c LCD Log firmware functions
- BSP/Src/sd.c SD features
- BSP/Src/eeprom.c EEPROM features
- BSP/Src/qspi.c QSPI features
- BSP/Src/audio.c Audio playback features
- BSP/Src/audio_rec_dfsdm.c DFSDM audio record features
- BSP/Inc/main.h Main program header file
- BSP/Inc/stm32f7xx_hal_conf.h HAL configuration file
- BSP/Inc/stm32f7xx_it.h Interrupt handlers header file
- BSP/Inc/lcd_log_conf.h lcd_log configuration template file
- BSP/Inc/stlogo.h Image used for BSP example
- BSP/Inc/perroquet.h Image used for BSP example
@par Hardware and Software environment
- This example runs on STM32F722xx/STM32F723xx/STM32F732xx/STM32F733xx devices.
- This example has been tested with STMicroelectronics STM32723E-DISCOVERY
board and can be easily tailored to any other supported device
and development board.
@par How to use it ?
- Use STLink utility, available on www.st.com or any other in-system programming
tool to load "BSP/Binary/audio_sample.bin" file to the STM32 internal flash
at the address 0x08040000.
In order to make the program work, you must do the following :
- Open your preferred toolchain
- Rebuild all files and load your image into target memory
- Run the example
@note Make sure that the tool flash loader does not erase or overwrite the
loaded audio file at address 0x08040000 by limiting the application
end address to 0x0803FFFF. This is already done for the example project
- Connect a headphone with a built-in microphone to the audio jack connector (CN5).
*/