OrgST-Microelectronics/STM32CubeF7
1
0
Fork 0
mirror of https://github.com/STMicroelectronics/STM32CubeF7.git synced 2025-05-09 19:29:34 +08:00
Code Issues Releases Wiki Activity
STM32CubeF7/Drivers/BSP/STM32F7308-Discovery/stm32f7308_discovery.h
Eya f8bda023e3 Release v1.17.0
2022-07-04 11:37:52 +01:00

394 lines
13 KiB
C
Raw Blame History

/**
******************************************************************************
* @file stm32f7308_discovery.h
* @author MCD Application Team
* @brief This file contains definitions for STM32F7308-Discovery LEDs,
* push-buttons hardware resources.
******************************************************************************
* @attention
*
* Copyright (c) 2018 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F7308_DISCOVERY_H
#define __STM32F7308_DISCOVERY_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f7xx_hal.h"
/** @addtogroup BSP
* @{
*/
/** @addtogroup STM32F7308_DISCOVERY
* @{
*/
/** @addtogroup STM32F7308_DISCOVERY_LOW_LEVEL
* @{
*/
/** @defgroup STM32F7308_DISCOVERY_LOW_LEVEL_Exported_Types STM32F7308 Discovery Low Level Exported Types
* @{
*/
/**
* @brief Define for STM32F7308_DISCOVERY board
*/
#if !defined (USE_STM32F7308_DISCO)
#define USE_STM32F7308_DISCO
#endif
/** @brief Led_TypeDef
* STM32F7308_Discovery board leds definitions.
*/
typedef enum
{
LED5 = 0,
LED_RED = LED5,
LED6 = 1,
LED_GREEN = LED6
} Led_TypeDef;
/** @brief Button_TypeDef
* STM32F7308_Discovery board Buttons definitions.
*/
typedef enum
{
BUTTON_WAKEUP = 0,
} Button_TypeDef;
#define BUTTON_USER BUTTON_WAKEUP
/** @brief ButtonMode_TypeDef
* STM32F7308_Discovery board Buttons Modes definitions.
*/
typedef enum
{
BUTTON_MODE_GPIO = 0,
BUTTON_MODE_EXTI = 1
} ButtonMode_TypeDef;
typedef enum
{
PB_SET = 0,
PB_RESET = !PB_SET
} ButtonValue_TypeDef;
typedef enum
{
COM1 = 0,
}COM_TypeDef;
/** @brief DISCO_Status_TypeDef
* STM32F7308_DISCO board Status return possible values.
*/
typedef enum
{
DISCO_OK = 0,
DISCO_ERROR = 1
} DISCO_Status_TypeDef;
/**
* @}
*/
/** @addtogroup STM32F7308_DISCOVERY_LOW_LEVEL_LED STM32F7308 Discovery Low Level Led
* @{
*/
/* Always four leds for all revisions of Discovery boards */
#define LEDn ((uint8_t)2)
/* 2 Leds are connected to MCU directly on PA7 and PB1 */
#define LED5_GPIO_PORT ((GPIO_TypeDef*)GPIOA)
#define LED6_GPIO_PORT ((GPIO_TypeDef*)GPIOB)
#define LED5_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
#define LED6_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
#define LED5_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
#define LED6_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
#define LEDx_GPIO_CLK_ENABLE(__INDEX__) do{if((__INDEX__) == 0) LED5_GPIO_CLK_ENABLE(); else \
if((__INDEX__) == 1) LED6_GPIO_CLK_ENABLE(); \
}while(0)
#define LEDx_GPIO_CLK_DISABLE(__INDEX__) do{if((__INDEX__) == 0) LED5_GPIO_CLK_DISABLE(); else \
if((__INDEX__) == 1) LED6_GPIO_CLK_DISABLE(); \
}while(0)
#define LED5_PIN ((uint32_t)GPIO_PIN_7)
#define LED6_PIN ((uint32_t)GPIO_PIN_1)
/**
* @}
*/
/** @addtogroup STM32F7308_DISCOVERY_LOW_LEVEL_BUTTON STM32F7308 Discovery Low Level Button
* @{
*/
/* Only one User/Wakeup button */
#define BUTTONn ((uint8_t)1)
/**
* @brief Wakeup push-button
*/
#define WAKEUP_BUTTON_PIN GPIO_PIN_0
#define WAKEUP_BUTTON_GPIO_PORT GPIOA
#define WAKEUP_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
#define WAKEUP_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
#define WAKEUP_BUTTON_EXTI_IRQn EXTI0_IRQn
/* Define the USER button as an alias of the Wakeup button */
#define USER_BUTTON_PIN WAKEUP_BUTTON_PIN
#define USER_BUTTON_GPIO_PORT WAKEUP_BUTTON_GPIO_PORT
#define USER_BUTTON_GPIO_CLK_ENABLE() WAKEUP_BUTTON_GPIO_CLK_ENABLE()
#define USER_BUTTON_GPIO_CLK_DISABLE() WAKEUP_BUTTON_GPIO_CLK_DISABLE()
#define USER_BUTTON_EXTI_IRQn WAKEUP_BUTTON_EXTI_IRQn
#define BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
/**
* @}
*/
/** @defgroup STM32F7308_DISCOVERY_LOW_LEVEL_Exported_Constants LOW_LEVEL Exported Constants
* @{
*/
/**
* @brief USB OTG HS Over Current signal
*/
#define OTG_HS_OVER_CURRENT_PIN GPIO_PIN_10
#define OTG_HS_OVER_CURRENT_PORT GPIOH
#define OTG_HS_OVER_CURRENT_PORT_CLK_ENABLE() __HAL_RCC_GPIOH_CLK_ENABLE()
/**
* @brief USB OTG FS Over Current signal
*/
#define OTG_FS_OVER_CURRENT_PIN GPIO_PIN_8
#define OTG_FS_OVER_CURRENT_PORT GPIOC
#define OTG_FS_OVER_CURRENT_PORT_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE()
/**
* @brief TS_INT signal from TouchScreen
*/
#define TS_INT_PIN ((uint32_t)GPIO_PIN_9)
#define TS_INT_GPIO_PORT ((GPIO_TypeDef*)GPIOI)
#define TS_INT_GPIO_CLK_ENABLE() __HAL_RCC_GPIOI_CLK_ENABLE()
#define TS_INT_GPIO_CLK_DISABLE() __HAL_RCC_GPIOI_CLK_DISABLE()
#define TS_INT_EXTI_IRQn EXTI9_5_IRQn
/**
* @brief TS RESET pin
*/
#define TS_RESET_PIN GPIO_PIN_9
#define TS_RESET_GPIO_PORT GPIOH
#define TS_RESET_GPIO_CLK_ENABLE() __HAL_RCC_GPIOH_CLK_ENABLE()
#define TS_RESET_GPIO_CLK_DISABLE() __HAL_RCC_GPIOH_CLK_DISABLE()
#define TS_RESET_EXTI_IRQn EXTI15_10_IRQn
/**
* @brief Definition for I2C3 Touchscreen Pins
* resources (touchescreen).
* Definition for I2C3 clock resources
*/
#define TS_I2Cx I2C3
#define TS_I2Cx_CLK_ENABLE() __HAL_RCC_I2C3_CLK_ENABLE()
#define TS_I2Cx_SCL_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
#define TS_I2Cx_SDA_GPIO_CLK_ENABLE() __HAL_RCC_GPIOH_CLK_ENABLE()
#define TS_I2Cx_FORCE_RESET() __HAL_RCC_I2C3_FORCE_RESET()
#define TS_I2Cx_RELEASE_RESET() __HAL_RCC_I2C3_RELEASE_RESET()
/** @brief Definition for Touchscreen Pins
*/
#define TS_I2Cx_SCL_PIN GPIO_PIN_8
#define TS_I2Cx_SCL_AF GPIO_AF4_I2C3
#define TS_I2Cx_SCL_GPIO_PORT GPIOA
#define TS_I2Cx_SDA_PIN GPIO_PIN_8
#define TS_I2Cx_SDA_AF GPIO_AF4_I2C3
#define TS_I2Cx_SDA_GPIO_PORT GPIOH
#define TS_I2Cx_EV_IRQn I2C3_EV_IRQn
#define TS_I2Cx_ER_IRQn I2C3_ER_IRQn
/**
* @brief TouchScreen FT6206 Slave I2C address
*/
#define TS_I2C_ADDRESS ((uint16_t)0x70)
/**
* @}
*/
/** @addtogroup STM32F7308_DISCOVERY_LOW_LEVEL_COM STM32F7308 DISCOVERY Low Level COM
* @{
*/
#define COMn ((uint8_t)1)
/**
* @brief Definition for COM port1, connected to USART2
*/
#define DISCOVERY_COM1 USART2
#define DISCOVERY_COM1_CLK_ENABLE() __HAL_RCC_USART2_CLK_ENABLE()
#define DISCOVERY_COM1_CLK_DISABLE() __HAL_RCC_USART2_CLK_DISABLE()
#define DISCOVERY_COM1_TX_PIN GPIO_PIN_3
#define DISCOVERY_COM1_TX_GPIO_PORT GPIOA
#define DISCOVERY_COM1_TX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
#define DISCOVERY_COM1_TX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
#define DISCOVERY_COM1_TX_AF GPIO_AF7_USART2
#define DISCOVERY_COM1_RX_PIN GPIO_PIN_2
#define DISCOVERY_COM1_RX_GPIO_PORT GPIOA
#define DISCOVERY_COM1_RX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
#define DISCOVERY_COM1_RX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
#define DISCOVERY_COM1_RX_AF GPIO_AF7_USART2
#define DISCOVERY_COM1_IRQn USART2_IRQn
#define DISCOVERY_COMx_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == COM1) {DISCOVERY_COM1_CLK_ENABLE();} } while(0)
#define DISCOVERY_COMx_CLK_DISABLE(__INDEX__) (((__INDEX__) == 0) ? DISCOVERY_COM1_CLK_DISABLE() : 0)
#define DISCOVERY_COMx_TX_GPIO_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == COM1) {DISCOVERY_COM1_TX_GPIO_CLK_ENABLE();} } while(0)
#define DISCOVERY_COMx_TX_GPIO_CLK_DISABLE(__INDEX__) (((__INDEX__) == 0) ? DISCOVERY_COM1_TX_GPIO_CLK_DISABLE() : 0)
#define DISCOVERY_COMx_RX_GPIO_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == COM1) {DISCOVERY_COM1_RX_GPIO_CLK_ENABLE();} } while(0)
#define DISCOVERY_COMx_RX_GPIO_CLK_DISABLE(__INDEX__) (((__INDEX__) == 0) ? DISCOVERY_COM1_RX_GPIO_CLK_DISABLE() : 0)
/**
* @brief Audio I2C Slave address
*/
#define AUDIO_I2C_ADDRESS ((uint16_t)0x34)
/**
* @brief User can use this section to tailor I2C1 instance used and associated
* resources (audio codec).
* Definition for I2C1 clock resources
*/
#define DISCOVERY_AUDIO_I2Cx I2C1
#define DISCOVERY_AUDIO_I2Cx_CLK_ENABLE() __HAL_RCC_I2C1_CLK_ENABLE()
#define DISCOVERY_AUDIO_I2Cx_SCL_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
#define DISCOVERY_AUDIO_I2Cx_SDA_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
#define DISCOVERY_AUDIO_I2Cx_FORCE_RESET() __HAL_RCC_I2C1_FORCE_RESET()
#define DISCOVERY_AUDIO_I2Cx_RELEASE_RESET() __HAL_RCC_I2C1_RELEASE_RESET()
/** @brief Definition for I2C1 Pins
*/
#define DISCOVERY_AUDIO_I2Cx_SCL_PIN GPIO_PIN_8 /*!< PB8 */
#define DISCOVERY_AUDIO_I2Cx_SCL_AF GPIO_AF4_I2C1
#define DISCOVERY_AUDIO_I2Cx_SCL_GPIO_PORT GPIOB
#define DISCOVERY_AUDIO_I2Cx_SDA_PIN GPIO_PIN_9 /*!< PB9 */
#define DISCOVERY_AUDIO_I2Cx_SDA_AF GPIO_AF4_I2C1
#define DISCOVERY_AUDIO_I2Cx_SDA_GPIO_PORT GPIOB
/** @brief Definition of I2C1 interrupt requests
*/
#define DISCOVERY_AUDIO_I2Cx_EV_IRQn I2C1_EV_IRQn
#define DISCOVERY_AUDIO_I2Cx_ER_IRQn I2C1_ER_IRQn
/* Definition for external, camera and Arduino connector I2Cx resources */
#define DISCOVERY_EXT_I2Cx I2C2
#define DISCOVERY_EXT_I2Cx_CLK_ENABLE() __HAL_RCC_I2C2_CLK_ENABLE()
#define DISCOVERY_EXT_DMAx_CLK_ENABLE() __HAL_RCC_DMA1_CLK_ENABLE()
#define DISCOVERY_EXT_I2Cx_SCL_SDA_GPIO_CLK_ENABLE() __HAL_RCC_GPIOH_CLK_ENABLE()
#define DISCOVERY_EXT_I2Cx_FORCE_RESET() __HAL_RCC_I2C2_FORCE_RESET()
#define DISCOVERY_EXT_I2Cx_RELEASE_RESET() __HAL_RCC_I2C2_RELEASE_RESET()
/* Definition for I2Cx Pins */
#define DISCOVERY_EXT_I2Cx_SCL_PIN GPIO_PIN_4
#define DISCOVERY_EXT_I2Cx_SCL_SDA_GPIO_PORT GPIOH
#define DISCOVERY_EXT_I2Cx_SCL_SDA_AF GPIO_AF4_I2C2
#define DISCOVERY_EXT_I2Cx_SDA_PIN GPIO_PIN_5
/* I2C interrupt requests */
#define DISCOVERY_EXT_I2Cx_EV_IRQn I2C2_EV_IRQn
#define DISCOVERY_EXT_I2Cx_ER_IRQn I2C2_ER_IRQn
/* I2C TIMING Register define when I2C clock source is SYSCLK */
/* I2C TIMING is calculated from APB1 source clock = 50 MHz */
/* Due to the big MOFSET capacity for adapting the camera level the rising time is very large (>1us) */
/* 0x40912732 takes in account the big rising and aims a clock of 100khz */
#ifndef DISCOVERY_I2Cx_TIMING
#define DISCOVERY_I2Cx_TIMING ((uint32_t)0x40912732)
#endif /* DISCOVERY_I2Cx_TIMING */
/**
* @}
*/
/** @defgroup STM32F7308_DISCOVERY_LOW_LEVEL_Exported_Macros STM32F7308 Discovery Low Level Exported Macros
* @{
*/
/**
* @}
*/
/** @defgroup STM32F7308_DISCOVERY_LOW_LEVEL_Exported_Functions STM32F7308 Discovery Low Level Exported Functions
* @{
*/
uint32_t BSP_GetVersion(void);
void BSP_LED_Init(Led_TypeDef Led);
void BSP_LED_DeInit(Led_TypeDef Led);
void BSP_LED_On(Led_TypeDef Led);
void BSP_LED_Off(Led_TypeDef Led);
void BSP_LED_Toggle(Led_TypeDef Led);
void BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef Button_Mode);
void BSP_PB_DeInit(Button_TypeDef Button);
uint32_t BSP_PB_GetState(Button_TypeDef Button);
void BSP_COM_Init(COM_TypeDef COM, UART_HandleTypeDef *huart);
void BSP_COM_DeInit(COM_TypeDef COM, UART_HandleTypeDef *huart);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F7308_DISCOVERY_H */
Reference in New Issue View Git Blame Copy Permalink