mirror of
https://github.com/STMicroelectronics/STM32CubeF7.git
synced 2025-05-05 19:30:14 +08:00
96 lines
4.9 KiB
Plaintext
96 lines
4.9 KiB
Plaintext
/**
|
||
@page CRC_UserDefinedPolynomial User-defined generating polynomial CRC Example
|
||
|
||
@verbatim
|
||
******************************************************************************
|
||
* @file CRC/CRC_UserDefinedPolynomial/readme.txt
|
||
* @author MCD Application Team
|
||
* @brief Description of CRC Example with user-defined generating polynomial.
|
||
******************************************************************************
|
||
*
|
||
* Copyright (c) 2016 STMicroelectronics. All rights reserved.
|
||
*
|
||
* This software component is licensed by ST under BSD 3-Clause license,
|
||
* the "License"; You may not use this file except in compliance with the
|
||
* License. You may obtain a copy of the License at:
|
||
* opensource.org/licenses/BSD-3-Clause
|
||
*
|
||
******************************************************************************
|
||
@endverbatim
|
||
|
||
@par Example Description
|
||
|
||
How to configure the CRC using the HAL API. The CRC (cyclic
|
||
redundancy check) calculation unit computes the 8-bit CRC code for a given
|
||
buffer of 32-bit data words, based on a user-defined generating polynomial.
|
||
In this example, the polynomial is set manually to 0x9B, that is,
|
||
X^8 + X^7 + X^4 + X^3 + X + 1.
|
||
|
||
At the beginning of the main program the HAL_Init() function is called to reset
|
||
all the peripherals, initialize the Flash interface and the systick.
|
||
Then the SystemClock_Config() function is used to configure the system
|
||
clock (SYSCLK).
|
||
|
||
The CRC peripheral configuration is ensured by HAL_CRC_Init() function.
|
||
The latter is calling HAL_CRC_MspInit() function which core is implementing
|
||
the configuration of the needed CRC resources according to the used hardware (CLOCK).
|
||
You can update HAL_CRC_Init() input parameters to change the CRC configuration.
|
||
|
||
The calculated CRC code is stored in uwCRCValue variable.
|
||
Once calculated, the CRC value (uwCRCValue) is compared to the CRC expected value (uwExpectedCRCValue).
|
||
|
||
STM32F767ZI-Nucleo board's LEDs are used to monitor the example status:
|
||
- LED1 is ON when the correct CRC value is calculated
|
||
- LED3 is ON when there is an error in initialization or if an incorrect CRC value is calculated.
|
||
|
||
@note Care must be taken when using HAL_Delay(), this function provides accurate delay (in milliseconds)
|
||
based on variable incremented in SysTick ISR. This implies that if HAL_Delay() is called from
|
||
a peripheral ISR process, then the SysTick interrupt must have higher priority (numerically lower)
|
||
than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
|
||
To change the SysTick interrupt priority you have to use HAL_NVIC_SetPriority() function.
|
||
|
||
@note The application needs to ensure that the SysTick time base is always set to 1 millisecond
|
||
to have correct HAL operation.
|
||
|
||
@par Keywords
|
||
|
||
Security, CRC, CRC Polynomial, IEC 60870-5, hardware CRC, user-defined, generating polynomial
|
||
|
||
@Note<74>If the user code size exceeds the DTCM-RAM size or starts from internal cacheable memories (SRAM1 and SRAM2),that is shared between several processors,
|
||
<20><><EFBFBD><EFBFBD><EFBFBD>then it is highly recommended to enable the CPU cache and maintain its coherence at application level.
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>The address and the size of cacheable buffers (shared between CPU and other masters) must be properly updated to be aligned to cache line size (32 bytes).
|
||
|
||
@Note It is recommended to enable the cache and maintain its coherence, but depending on the use case
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> It is also possible to configure the MPU as "Write through", to guarantee the write access coherence.
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>In that case, the MPU must be configured as Cacheable/Bufferable/Not Shareable.
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Even though the user must manage the cache coherence for read accesses.
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Please refer to the AN4838 <20>Managing memory protection unit (MPU) in STM32 MCUs<55>
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Please refer to the AN4839 <20>Level 1 cache on STM32F7 Series<65>
|
||
|
||
@par Directory contents
|
||
|
||
- CRC/CRC_UserDefinedPolynomial/Inc/stm32f7xx_hal_conf.h HAL configuration file
|
||
- CRC/CRC_UserDefinedPolynomial/Inc/stm32f7xx_it.h Interrupt handlers header file
|
||
- CRC/CRC_UserDefinedPolynomial/Inc/main.h Header for main.c module
|
||
- CRC/CRC_UserDefinedPolynomial/Src/stm32f7xx_it.c Interrupt handlers
|
||
- CRC/CRC_UserDefinedPolynomial/Src/main.c Main program
|
||
- CRC/CRC_UserDefinedPolynomial/Src/stm32f7xx_hal_msp.c HAL MSP module
|
||
- CRC/CRC_UserDefinedPolynomial/Src/system_stm32f7xx.c STM32F7xx system source file
|
||
|
||
|
||
@par Hardware and Software environment
|
||
|
||
- This example runs on STM32F767ZI devices.
|
||
- This example has been tested with STM32F767ZI-Nucleo board and can be
|
||
easily tailored to any other supported device and development board.
|
||
|
||
@par How to use it ?
|
||
|
||
In order to make the program work, you must do the following:
|
||
- Open your preferred toolchain
|
||
- Rebuild all files and load your image into target memory
|
||
- Run the example
|
||
|
||
* <h3><center>© COPYRIGHT STMicroelectronics</center></h3>
|
||
*/
|
||
|