mirror of
https://github.com/STMicroelectronics/STM32CubeF7.git
synced 2025-05-09 19:29:34 +08:00
102 lines
4.2 KiB
Plaintext
102 lines
4.2 KiB
Plaintext
/**
|
||
@page ADC_TemperatureSensor ADC example
|
||
|
||
@verbatim
|
||
******************************************************************************
|
||
* @file Examples_LL/ADC/ADC_TemperatureSensor/readme.txt
|
||
* @author MCD Application Team
|
||
* @brief Description of the ADC_TemperatureSensor example.
|
||
******************************************************************************
|
||
* @attention
|
||
*
|
||
* Copyright (c) 2016 STMicroelectronics.
|
||
* All rights reserved.
|
||
*
|
||
* This software is licensed under terms that can be found in the LICENSE file
|
||
* in the root directory of this software component.
|
||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||
*
|
||
******************************************************************************
|
||
@endverbatim
|
||
|
||
@par Example Description
|
||
|
||
How to use an ADC peripheral to perform a single ADC conversion on the
|
||
internal temperature sensor and calculate the temperature in degrees Celsius.
|
||
This example uses the polling programming model (for interrupt or DMA
|
||
programming models, refer to other examples).
|
||
|
||
This example is based on the STM32F7xx ADC LL API;
|
||
peripheral initialization done using LL unitary services functions
|
||
for optimization purpose (performance and size).
|
||
|
||
Example configuration:
|
||
ADC is configured to convert a single channel, in single conversion mode,
|
||
from SW trigger.
|
||
Sequencer of group regular (default group available on ADC of all STM32 devices)
|
||
is configured to convert 1 channel: internal channel temperature sensor.
|
||
|
||
Example execution:
|
||
At each press on push button, the ADC performs 1 conversion of the selected channel.
|
||
Software polls for conversion completion.
|
||
When conversion is completed, main program reads conversion data
|
||
from ADC data register and stores it into a variable, LED1 is turned on.
|
||
|
||
ADC conversions raw data are computed to physical values
|
||
using LL ADC driver helper macro:
|
||
- Value of temperature (unit: degree Celsius)
|
||
|
||
For debug: variables to monitor with debugger watch window:
|
||
- "uhADCxConvertedData": ADC group regular conversion data
|
||
- "hADCxConvertedData_Temperature_DegreeCelsius": Value of temperature (unit: degree Celsius)
|
||
|
||
Connection needed:
|
||
None.
|
||
|
||
Other peripherals used:
|
||
1 GPIO for push button
|
||
1 GPIO for LED1
|
||
|
||
@par Keywords
|
||
|
||
Analog, ADC, Temperature Sensor, Single Conversion, Polling, Software trigger, Signal measurement,
|
||
|
||
@Note<74>If the user code size exceeds the DTCM-RAM size or starts from internal cacheable memories (SRAM1 and SRAM2),that is shared between several processors,
|
||
<20><><EFBFBD><EFBFBD><EFBFBD>then it is highly recommended to enable the CPU cache and maintain its coherence at application level.
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>The address and the size of cacheable buffers (shared between CPU and other masters) must be properly updated to be aligned to cache line size (32 bytes).
|
||
|
||
@Note It is recommended to enable the cache and maintain its coherence, but depending on the use case
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> It is also possible to configure the MPU as "Write through", to guarantee the write access coherence.
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>In that case, the MPU must be configured as Cacheable/Bufferable/Not Shareable.
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Even though the user must manage the cache coherence for read accesses.
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Please refer to the AN4838 <20>Managing memory protection unit (MPU) in STM32 MCUs<55>
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Please refer to the AN4839 <20>Level 1 cache on STM32F7 Series<65>
|
||
|
||
@par Directory contents
|
||
|
||
- ADC/ADC_TemperatureSensor/Inc/stm32f7xx_it.h Interrupt handlers header file
|
||
- ADC/ADC_TemperatureSensor/Inc/main.h Header for main.c module
|
||
- ADC/ADC_TemperatureSensor/Inc/stm32_assert.h Template file to include assert_failed function
|
||
- ADC/ADC_TemperatureSensor/Src/stm32f7xx_it.c Interrupt handlers
|
||
- ADC/ADC_TemperatureSensor/Src/main.c Main program
|
||
- ADC/ADC_TemperatureSensor/Src/system_stm32f7xx.c STM32F7xx system source file
|
||
|
||
|
||
@par Hardware and Software environment
|
||
|
||
- This example runs on STM32F767xx devices.
|
||
|
||
- This example has been tested with NUCLEO-F767ZI board and can be
|
||
easily tailored to any other supported device and development board.
|
||
|
||
|
||
@par How to use it ?
|
||
|
||
In order to make the program work, you must do the following :
|
||
- Open your preferred toolchain
|
||
- Rebuild all files and load your image into target memory
|
||
- Run the example
|
||
|
||
|
||
*/
|