mirror of
https://github.com/STMicroelectronics/STM32CubeF7.git
synced 2025-05-03 22:17:13 +08:00
1996 lines
61 KiB
C
1996 lines
61 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f7xx_hal_lptim.c
|
|
* @author MCD Application Team
|
|
* @brief LPTIM HAL module driver.
|
|
* This file provides firmware functions to manage the following
|
|
* functionalities of the Low Power Timer (LPTIM) peripheral:
|
|
* + Initialization and de-initialization functions.
|
|
* + Start/Stop operation functions in polling mode.
|
|
* + Start/Stop operation functions in interrupt mode.
|
|
* + Reading operation functions.
|
|
* + Peripheral State functions.
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### How to use this driver #####
|
|
==============================================================================
|
|
[..]
|
|
The LPTIM HAL driver can be used as follows:
|
|
|
|
(#)Initialize the LPTIM low level resources by implementing the
|
|
HAL_LPTIM_MspInit():
|
|
(##) Enable the LPTIM interface clock using __LPTIMx_CLK_ENABLE().
|
|
(##) In case of using interrupts (e.g. HAL_LPTIM_PWM_Start_IT()):
|
|
(+++) Configure the LPTIM interrupt priority using HAL_NVIC_SetPriority().
|
|
(+++) Enable the LPTIM IRQ handler using HAL_NVIC_EnableIRQ().
|
|
(+++) In LPTIM IRQ handler, call HAL_LPTIM_IRQHandler().
|
|
|
|
(#)Initialize the LPTIM HAL using HAL_LPTIM_Init(). This function
|
|
configures mainly:
|
|
(##) The instance: LPTIM1.
|
|
(##) Clock: the counter clock.
|
|
(+++) Source: it can be either the ULPTIM input (IN1) or one of
|
|
the internal clock; (APB, LSE, LSI or MSI).
|
|
(+++) Prescaler: select the clock divider.
|
|
(##) UltraLowPowerClock : To be used only if the ULPTIM is selected
|
|
as counter clock source.
|
|
(+++) Polarity: polarity of the active edge for the counter unit
|
|
if the ULPTIM input is selected.
|
|
(+++) SampleTime: clock sampling time to configure the clock glitch
|
|
filter.
|
|
(##) Trigger: How the counter start.
|
|
(+++) Source: trigger can be software or one of the hardware triggers.
|
|
(+++) ActiveEdge: only for hardware trigger.
|
|
(+++) SampleTime: trigger sampling time to configure the trigger
|
|
glitch filter.
|
|
(##) OutputPolarity: 2 opposite polarities are possibles.
|
|
(##) UpdateMode: specifies whether the update of the autoreload and
|
|
the compare values is done immediately or after the end of current
|
|
period.
|
|
|
|
(#)Six modes are available:
|
|
|
|
(##) PWM Mode: To generate a PWM signal with specified period and pulse,
|
|
call HAL_LPTIM_PWM_Start() or HAL_LPTIM_PWM_Start_IT() for interruption
|
|
mode.
|
|
|
|
(##) One Pulse Mode: To generate pulse with specified width in response
|
|
to a stimulus, call HAL_LPTIM_OnePulse_Start() or
|
|
HAL_LPTIM_OnePulse_Start_IT() for interruption mode.
|
|
|
|
(##) Set once Mode: In this mode, the output changes the level (from
|
|
low level to high level if the output polarity is configured high, else
|
|
the opposite) when a compare match occurs. To start this mode, call
|
|
HAL_LPTIM_SetOnce_Start() or HAL_LPTIM_SetOnce_Start_IT() for
|
|
interruption mode.
|
|
|
|
(##) Encoder Mode: To use the encoder interface call
|
|
HAL_LPTIM_Encoder_Start() or HAL_LPTIM_Encoder_Start_IT() for
|
|
interruption mode.
|
|
|
|
(##) Time out Mode: an active edge on one selected trigger input rests
|
|
the counter. The first trigger event will start the timer, any
|
|
successive trigger event will reset the counter and the timer will
|
|
restart. To start this mode call HAL_LPTIM_TimeOut_Start_IT() or
|
|
HAL_LPTIM_TimeOut_Start_IT() for interruption mode.
|
|
|
|
(##) Counter Mode: counter can be used to count external events on
|
|
the LPTIM Input1 or it can be used to count internal clock cycles.
|
|
To start this mode, call HAL_LPTIM_Counter_Start() or
|
|
HAL_LPTIM_Counter_Start_IT() for interruption mode.
|
|
|
|
|
|
(#) User can stop any process by calling the corresponding API:
|
|
HAL_LPTIM_Xxx_Stop() or HAL_LPTIM_Xxx_Stop_IT() if the process is
|
|
already started in interruption mode.
|
|
|
|
(#) Call HAL_LPTIM_DeInit() to deinitialize the LPTIM peripheral.
|
|
|
|
*** Callback registration ***
|
|
=============================================
|
|
|
|
The compilation define USE_HAL_LPTIM_REGISTER_CALLBACKS when set to 1
|
|
allows the user to configure dynamically the driver callbacks.
|
|
|
|
Use Function @ref HAL_LPTIM_RegisterCallback() to register a callback.
|
|
@ref HAL_LPTIM_RegisterCallback() takes as parameters the HAL peripheral handle,
|
|
the Callback ID and a pointer to the user callback function.
|
|
|
|
Use function @ref HAL_LPTIM_UnRegisterCallback() to reset a callback to the default
|
|
weak function.
|
|
@ref HAL_LPTIM_UnRegisterCallback takes as parameters the HAL peripheral handle,
|
|
and the Callback ID.
|
|
|
|
These functions allow to register/unregister following callbacks:
|
|
(+) MspInitCallback : LPTIM Msp Init Callback.
|
|
(+) MspDeInitCallback : LPTIM Msp DeInit Callback.
|
|
(+) CompareMatchCallback : LPTIM Compare Match Init Callback.
|
|
(+) AutoReloadMatchCallback : LPTIM Auto Reload Match Callback.
|
|
(+) TriggerCallback : LPTIM Trigger Callback.
|
|
(+) CompareWriteCallback : LPTIM Compare Write Callback.
|
|
(+) AutoReloadWriteCallback : LPTIM Auto Reload Write Callback.
|
|
(+) DirectionUpCallback : LPTIM Direction Up Callback.
|
|
(+) DirectionDownCallback : LPTIM Direction Down Callback.
|
|
|
|
By default, after the @ref HAL_LPTIM_Init and when the state is HAL_LPTIM_STATE_RESET
|
|
all interrupt callbacks are set to the corresponding weak functions:
|
|
examples @ref HAL_LPTIM_CompareMatchCallback(), @ref HAL_LPTIM_AutoReloadMatchCallback().
|
|
|
|
Exception done for MspInit and MspDeInit functions that are reset to the legacy weak
|
|
functionalities in the @ref HAL_LPTIM_Init/@ref HAL_LPTIM_DeInit only when these
|
|
callbacks are null (not registered beforehand). If not, MspInit or MspDeInit are not null,
|
|
the @ref HAL_LPTIM_Init/@ref HAL_LPTIM_DeInit keep and use the user MspInit/MspDeInit
|
|
callbacks (registered beforehand)
|
|
|
|
Callbacks can be registered/unregistered in HAL_LPTIM_STATE_READY state only.
|
|
Exception done MspInit/MspDeInit that can be registered/unregistered
|
|
in HAL_LPTIM_STATE_READY or HAL_LPTIM_STATE_RESET state, thus registered (user)
|
|
MspInit/DeInit callbacks can be used during the @ref HAL_LPTIM_Init/@ref HAL_LPTIM_DeInit.
|
|
In that case first register the MspInit/MspDeInit user callbacks using
|
|
@ref HAL_LPTIM_RegisterCallback() before calling DeInit or Init function.
|
|
|
|
When The compilation define USE_HAL_LPTIM_REGISTER_CALLBACKS is set to 0 or
|
|
not defined, the callback registration feature is not available and all callbacks
|
|
are set to the corresponding weak functions.
|
|
|
|
@endverbatim
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
|
* All rights reserved.</center></h2>
|
|
*
|
|
* This software component is licensed by ST under BSD 3-Clause license,
|
|
* the "License"; You may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at:
|
|
* opensource.org/licenses/BSD-3-Clause
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f7xx_hal.h"
|
|
|
|
/** @addtogroup STM32F7xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup LPTIM LPTIM
|
|
* @brief LPTIM HAL module driver.
|
|
* @{
|
|
*/
|
|
|
|
#ifdef HAL_LPTIM_MODULE_ENABLED
|
|
/* Private types -------------------------------------------------------------*/
|
|
/** @defgroup LPTIM_Private_Types LPTIM Private Types
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private defines -----------------------------------------------------------*/
|
|
/** @defgroup LPTIM_Private_Defines LPTIM Private Defines
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/** @addtogroup LPTIM_Private_Variables LPTIM Private Variables
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private constants ---------------------------------------------------------*/
|
|
/** @addtogroup LPTIM_Private_Constants LPTIM Private Constants
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private macros ------------------------------------------------------------*/
|
|
/** @addtogroup LPTIM_Private_Macros LPTIM Private Macros
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
/** @addtogroup LPTIM_Private_Functions_Prototypes LPTIM Private Functions Prototypes
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private functions ---------------------------------------------------------*/
|
|
/** @addtogroup LPTIM_Private_Functions LPTIM Private Functions
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported functions ---------------------------------------------------------*/
|
|
/** @defgroup LPTIM_Exported_Functions LPTIM Exported Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup LPTIM_Group1 Initialization/de-initialization functions
|
|
* @brief Initialization and Configuration functions.
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### Initialization and de-initialization functions #####
|
|
==============================================================================
|
|
[..] This section provides functions allowing to:
|
|
(+) Initialize the LPTIM according to the specified parameters in the
|
|
LPTIM_InitTypeDef and creates the associated handle.
|
|
(+) DeInitialize the LPTIM peripheral.
|
|
(+) Initialize the LPTIM MSP.
|
|
(+) DeInitialize LPTIM MSP.
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Initializes the LPTIM according to the specified parameters in the
|
|
* LPTIM_InitTypeDef and creates the associated handle.
|
|
* @param hlptim LPTIM handle
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_LPTIM_Init(LPTIM_HandleTypeDef *hlptim)
|
|
{
|
|
uint32_t tmpcfgr = 0;
|
|
|
|
/* Check the LPTIM handle allocation */
|
|
if(hlptim == NULL)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
|
|
|
|
assert_param(IS_LPTIM_CLOCK_SOURCE(hlptim->Init.Clock.Source));
|
|
assert_param(IS_LPTIM_CLOCK_PRESCALER(hlptim->Init.Clock.Prescaler));
|
|
if ((hlptim->Init.Clock.Source) == LPTIM_CLOCKSOURCE_ULPTIM)
|
|
{
|
|
assert_param(IS_LPTIM_CLOCK_POLARITY(hlptim->Init.UltraLowPowerClock.Polarity));
|
|
assert_param(IS_LPTIM_CLOCK_SAMPLE_TIME(hlptim->Init.UltraLowPowerClock.SampleTime));
|
|
}
|
|
assert_param(IS_LPTIM_TRG_SOURCE(hlptim->Init.Trigger.Source));
|
|
if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE)
|
|
{
|
|
assert_param(IS_LPTIM_TRIG_SAMPLE_TIME(hlptim->Init.Trigger.SampleTime));
|
|
assert_param(IS_LPTIM_EXT_TRG_POLARITY(hlptim->Init.Trigger.ActiveEdge));
|
|
}
|
|
assert_param(IS_LPTIM_OUTPUT_POLARITY(hlptim->Init.OutputPolarity));
|
|
assert_param(IS_LPTIM_UPDATE_MODE(hlptim->Init.UpdateMode));
|
|
assert_param(IS_LPTIM_COUNTER_SOURCE(hlptim->Init.CounterSource));
|
|
|
|
if(hlptim->State == HAL_LPTIM_STATE_RESET)
|
|
{
|
|
/* Allocate lock resource and initialize it */
|
|
hlptim->Lock = HAL_UNLOCKED;
|
|
|
|
#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1)
|
|
/* Reset the LPTIM callback to the legacy weak callbacks */
|
|
hlptim->CompareMatchCallback = HAL_LPTIM_CompareMatchCallback;
|
|
hlptim->AutoReloadMatchCallback = HAL_LPTIM_AutoReloadMatchCallback;
|
|
hlptim->TriggerCallback = HAL_LPTIM_TriggerCallback;
|
|
hlptim->CompareWriteCallback = HAL_LPTIM_CompareWriteCallback;
|
|
hlptim->AutoReloadWriteCallback = HAL_LPTIM_AutoReloadWriteCallback;
|
|
hlptim->DirectionUpCallback = HAL_LPTIM_DirectionUpCallback;
|
|
hlptim->DirectionDownCallback = HAL_LPTIM_DirectionDownCallback;
|
|
|
|
if(hlptim->MspInitCallback == NULL)
|
|
{
|
|
hlptim->MspInitCallback = HAL_LPTIM_MspInit;
|
|
}
|
|
/* Init the low level hardware : GPIO, CLOCK, NVIC */
|
|
hlptim->MspInitCallback(hlptim);
|
|
#else
|
|
/* Init the low level hardware */
|
|
HAL_LPTIM_MspInit(hlptim);
|
|
#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */
|
|
}
|
|
/* Change the LPTIM state */
|
|
hlptim->State = HAL_LPTIM_STATE_BUSY;
|
|
|
|
/* Get the LPTIMx CFGR value */
|
|
tmpcfgr = hlptim->Instance->CFGR;
|
|
|
|
if ((hlptim->Init.Clock.Source) == LPTIM_CLOCKSOURCE_ULPTIM)
|
|
{
|
|
tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_CKPOL | LPTIM_CFGR_CKFLT));
|
|
}
|
|
if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE)
|
|
{
|
|
tmpcfgr &= (uint32_t)(~ (LPTIM_CFGR_TRGFLT | LPTIM_CFGR_TRIGSEL));
|
|
}
|
|
|
|
/* Clear CKSEL, PRESC, TRIGEN, TRGFLT, WAVPOL, PRELOAD & COUNTMODE bits */
|
|
tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_CKSEL | LPTIM_CFGR_TRIGEN | LPTIM_CFGR_PRELOAD |
|
|
LPTIM_CFGR_WAVPOL | LPTIM_CFGR_PRESC | LPTIM_CFGR_COUNTMODE ));
|
|
|
|
/* Set initialization parameters */
|
|
tmpcfgr |= (hlptim->Init.Clock.Source |
|
|
hlptim->Init.Clock.Prescaler |
|
|
hlptim->Init.OutputPolarity |
|
|
hlptim->Init.UpdateMode |
|
|
hlptim->Init.CounterSource);
|
|
|
|
if ((hlptim->Init.Clock.Source) == LPTIM_CLOCKSOURCE_ULPTIM)
|
|
{
|
|
tmpcfgr |= (hlptim->Init.UltraLowPowerClock.Polarity |
|
|
hlptim->Init.UltraLowPowerClock.SampleTime);
|
|
}
|
|
|
|
if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE)
|
|
{
|
|
/* Enable External trigger and set the trigger source */
|
|
tmpcfgr |= (hlptim->Init.Trigger.Source |
|
|
hlptim->Init.Trigger.ActiveEdge |
|
|
hlptim->Init.Trigger.SampleTime);
|
|
}
|
|
|
|
/* Write to LPTIMx CFGR */
|
|
hlptim->Instance->CFGR = tmpcfgr;
|
|
|
|
/* Change the LPTIM state */
|
|
hlptim->State = HAL_LPTIM_STATE_READY;
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief DeInitializes the LPTIM peripheral.
|
|
* @param hlptim LPTIM handle
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_LPTIM_DeInit(LPTIM_HandleTypeDef *hlptim)
|
|
{
|
|
/* Check the LPTIM handle allocation */
|
|
if(hlptim == NULL)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Change the LPTIM state */
|
|
hlptim->State = HAL_LPTIM_STATE_BUSY;
|
|
|
|
/* Disable the LPTIM Peripheral Clock */
|
|
__HAL_LPTIM_DISABLE(hlptim);
|
|
|
|
#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1)
|
|
if(hlptim->MspDeInitCallback == NULL)
|
|
{
|
|
hlptim->MspDeInitCallback = HAL_LPTIM_MspDeInit;
|
|
}
|
|
/* DeInit the low level hardware */
|
|
hlptim->MspDeInitCallback(hlptim);
|
|
#else
|
|
/* DeInit the low level hardware: CLOCK, NVIC.*/
|
|
HAL_LPTIM_MspDeInit(hlptim);
|
|
#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */
|
|
|
|
/* Change the LPTIM state */
|
|
hlptim->State = HAL_LPTIM_STATE_RESET;
|
|
|
|
/* Release Lock */
|
|
__HAL_UNLOCK(hlptim);
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Initializes the LPTIM MSP.
|
|
* @param hlptim LPTIM handle
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef *hlptim)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hlptim);
|
|
|
|
/* NOTE : This function Should not be modified, when the callback is needed,
|
|
the HAL_LPTIM_MspInit could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief DeInitializes LPTIM MSP.
|
|
* @param hlptim LPTIM handle
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_LPTIM_MspDeInit(LPTIM_HandleTypeDef *hlptim)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hlptim);
|
|
|
|
/* NOTE : This function Should not be modified, when the callback is needed,
|
|
the HAL_LPTIM_MspDeInit could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup LPTIM_Group2 LPTIM Start-Stop operation functions
|
|
* @brief Start-Stop operation functions.
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### LPTIM Start Stop operation functions #####
|
|
==============================================================================
|
|
[..] This section provides functions allowing to:
|
|
(+) Start the PWM mode.
|
|
(+) Stop the PWM mode.
|
|
(+) Start the One pulse mode.
|
|
(+) Stop the One pulse mode.
|
|
(+) Start the Set once mode.
|
|
(+) Stop the Set once mode.
|
|
(+) Start the Encoder mode.
|
|
(+) Stop the Encoder mode.
|
|
(+) Start the Timeout mode.
|
|
(+) Stop the Timeout mode.
|
|
(+) Start the Counter mode.
|
|
(+) Stop the Counter mode.
|
|
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Starts the LPTIM PWM generation.
|
|
* @param hlptim LPTIM handle
|
|
* @param Period Specifies the Autoreload value.
|
|
* This parameter must be a value between 0x0000 and 0xFFFF.
|
|
* @param Pulse Specifies the compare value.
|
|
* This parameter must be a value between 0x0000 and 0xFFFF.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_LPTIM_PWM_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
|
|
assert_param(IS_LPTIM_PERIOD(Period));
|
|
assert_param(IS_LPTIM_PULSE(Pulse));
|
|
|
|
/* Set the LPTIM state */
|
|
hlptim->State= HAL_LPTIM_STATE_BUSY;
|
|
|
|
/* Reset WAVE bit to set PWM mode */
|
|
hlptim->Instance->CFGR &= ~LPTIM_CFGR_WAVE;
|
|
|
|
/* Enable the Peripheral */
|
|
__HAL_LPTIM_ENABLE(hlptim);
|
|
|
|
/* Load the period value in the autoreload register */
|
|
__HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
|
|
|
|
/* Load the pulse value in the compare register */
|
|
__HAL_LPTIM_COMPARE_SET(hlptim, Pulse);
|
|
|
|
/* Start timer in continuous mode */
|
|
__HAL_LPTIM_START_CONTINUOUS(hlptim);
|
|
|
|
/* Change the TIM state*/
|
|
hlptim->State= HAL_LPTIM_STATE_READY;
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Stops the LPTIM PWM generation.
|
|
* @param hlptim LPTIM handle
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_LPTIM_PWM_Stop(LPTIM_HandleTypeDef *hlptim)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
|
|
|
|
/* Set the LPTIM state */
|
|
hlptim->State= HAL_LPTIM_STATE_BUSY;
|
|
|
|
/* Disable the Peripheral */
|
|
__HAL_LPTIM_DISABLE(hlptim);
|
|
|
|
/* Change the TIM state*/
|
|
hlptim->State= HAL_LPTIM_STATE_READY;
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Starts the LPTIM PWM generation in interrupt mode.
|
|
* @param hlptim LPTIM handle
|
|
* @param Period Specifies the Autoreload value.
|
|
* This parameter must be a value between 0x0000 and 0xFFFF
|
|
* @param Pulse Specifies the compare value.
|
|
* This parameter must be a value between 0x0000 and 0xFFFF
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_LPTIM_PWM_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
|
|
assert_param(IS_LPTIM_PERIOD(Period));
|
|
assert_param(IS_LPTIM_PULSE(Pulse));
|
|
|
|
/* Set the LPTIM state */
|
|
hlptim->State= HAL_LPTIM_STATE_BUSY;
|
|
|
|
/* Reset WAVE bit to set PWM mode */
|
|
hlptim->Instance->CFGR &= ~LPTIM_CFGR_WAVE;
|
|
|
|
/* Enable Autoreload write complete interrupt */
|
|
__HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARROK);
|
|
|
|
/* Enable Compare write complete interrupt */
|
|
__HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPOK);
|
|
|
|
/* Enable Autoreload match interrupt */
|
|
__HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARRM);
|
|
|
|
/* Enable Compare match interrupt */
|
|
__HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPM);
|
|
|
|
/* If external trigger source is used, then enable external trigger interrupt */
|
|
if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE)
|
|
{
|
|
/* Enable external trigger interrupt */
|
|
__HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_EXTTRIG);
|
|
}
|
|
|
|
/* Enable the Peripheral */
|
|
__HAL_LPTIM_ENABLE(hlptim);
|
|
|
|
/* Load the period value in the autoreload register */
|
|
__HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
|
|
|
|
/* Load the pulse value in the compare register */
|
|
__HAL_LPTIM_COMPARE_SET(hlptim, Pulse);
|
|
|
|
/* Start timer in continuous mode */
|
|
__HAL_LPTIM_START_CONTINUOUS(hlptim);
|
|
|
|
/* Change the TIM state*/
|
|
hlptim->State= HAL_LPTIM_STATE_READY;
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Stops the LPTIM PWM generation in interrupt mode.
|
|
* @param hlptim LPTIM handle
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_LPTIM_PWM_Stop_IT(LPTIM_HandleTypeDef *hlptim)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
|
|
|
|
/* Set the LPTIM state */
|
|
hlptim->State= HAL_LPTIM_STATE_BUSY;
|
|
|
|
/* Disable the Peripheral */
|
|
__HAL_LPTIM_DISABLE(hlptim);
|
|
|
|
/* Disable Autoreload write complete interrupt */
|
|
__HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARROK);
|
|
|
|
/* Disable Compare write complete interrupt */
|
|
__HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPOK);
|
|
|
|
/* Disable Autoreload match interrupt */
|
|
__HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARRM);
|
|
|
|
/* Disable Compare match interrupt */
|
|
__HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPM);
|
|
|
|
/* If external trigger source is used, then disable external trigger interrupt */
|
|
if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE)
|
|
{
|
|
/* Disable external trigger interrupt */
|
|
__HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_EXTTRIG);
|
|
}
|
|
|
|
/* Change the TIM state*/
|
|
hlptim->State= HAL_LPTIM_STATE_READY;
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Starts the LPTIM One pulse generation.
|
|
* @param hlptim LPTIM handle
|
|
* @param Period Specifies the Autoreload value.
|
|
* This parameter must be a value between 0x0000 and 0xFFFF.
|
|
* @param Pulse Specifies the compare value.
|
|
* This parameter must be a value between 0x0000 and 0xFFFF.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
|
|
assert_param(IS_LPTIM_PERIOD(Period));
|
|
assert_param(IS_LPTIM_PULSE(Pulse));
|
|
|
|
/* Set the LPTIM state */
|
|
hlptim->State= HAL_LPTIM_STATE_BUSY;
|
|
|
|
/* Reset WAVE bit to set one pulse mode */
|
|
hlptim->Instance->CFGR &= ~LPTIM_CFGR_WAVE;
|
|
|
|
/* Enable the Peripheral */
|
|
__HAL_LPTIM_ENABLE(hlptim);
|
|
|
|
/* Load the period value in the autoreload register */
|
|
__HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
|
|
|
|
/* Load the pulse value in the compare register */
|
|
__HAL_LPTIM_COMPARE_SET(hlptim, Pulse);
|
|
|
|
/* Start timer in continuous mode */
|
|
__HAL_LPTIM_START_SINGLE(hlptim);
|
|
|
|
/* Change the TIM state*/
|
|
hlptim->State= HAL_LPTIM_STATE_READY;
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Stops the LPTIM One pulse generation.
|
|
* @param hlptim LPTIM handle
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop(LPTIM_HandleTypeDef *hlptim)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
|
|
|
|
/* Set the LPTIM state */
|
|
hlptim->State= HAL_LPTIM_STATE_BUSY;
|
|
|
|
/* Disable the Peripheral */
|
|
__HAL_LPTIM_DISABLE(hlptim);
|
|
|
|
/* Change the TIM state*/
|
|
hlptim->State= HAL_LPTIM_STATE_READY;
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Starts the LPTIM One pulse generation in interrupt mode.
|
|
* @param hlptim LPTIM handle
|
|
* @param Period Specifies the Autoreload value.
|
|
* This parameter must be a value between 0x0000 and 0xFFFF.
|
|
* @param Pulse Specifies the compare value.
|
|
* This parameter must be a value between 0x0000 and 0xFFFF.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
|
|
assert_param(IS_LPTIM_PERIOD(Period));
|
|
assert_param(IS_LPTIM_PULSE(Pulse));
|
|
|
|
/* Set the LPTIM state */
|
|
hlptim->State= HAL_LPTIM_STATE_BUSY;
|
|
|
|
/* Reset WAVE bit to set one pulse mode */
|
|
hlptim->Instance->CFGR &= ~LPTIM_CFGR_WAVE;
|
|
|
|
/* Enable Autoreload write complete interrupt */
|
|
__HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARROK);
|
|
|
|
/* Enable Compare write complete interrupt */
|
|
__HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPOK);
|
|
|
|
/* Enable Autoreload match interrupt */
|
|
__HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARRM);
|
|
|
|
/* Enable Compare match interrupt */
|
|
__HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPM);
|
|
|
|
/* If external trigger source is used, then enable external trigger interrupt */
|
|
if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE)
|
|
{
|
|
/* Enable external trigger interrupt */
|
|
__HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_EXTTRIG);
|
|
}
|
|
|
|
/* Enable the Peripheral */
|
|
__HAL_LPTIM_ENABLE(hlptim);
|
|
|
|
/* Load the period value in the autoreload register */
|
|
__HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
|
|
|
|
/* Load the pulse value in the compare register */
|
|
__HAL_LPTIM_COMPARE_SET(hlptim, Pulse);
|
|
|
|
/* Start timer in continuous mode */
|
|
__HAL_LPTIM_START_SINGLE(hlptim);
|
|
|
|
/* Change the TIM state*/
|
|
hlptim->State= HAL_LPTIM_STATE_READY;
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Stops the LPTIM One pulse generation in interrupt mode.
|
|
* @param hlptim LPTIM handle
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop_IT(LPTIM_HandleTypeDef *hlptim)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
|
|
|
|
/* Set the LPTIM state */
|
|
hlptim->State= HAL_LPTIM_STATE_BUSY;
|
|
|
|
/* Disable the Peripheral */
|
|
__HAL_LPTIM_DISABLE(hlptim);
|
|
|
|
/* Disable Autoreload write complete interrupt */
|
|
__HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARROK);
|
|
|
|
/* Disable Compare write complete interrupt */
|
|
__HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPOK);
|
|
|
|
/* Disable Autoreload match interrupt */
|
|
__HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARRM);
|
|
|
|
/* Disable Compare match interrupt */
|
|
__HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPM);
|
|
|
|
/* If external trigger source is used, then disable external trigger interrupt */
|
|
if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE)
|
|
{
|
|
/* Disable external trigger interrupt */
|
|
__HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_EXTTRIG);
|
|
}
|
|
|
|
/* Change the TIM state*/
|
|
hlptim->State= HAL_LPTIM_STATE_READY;
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Starts the LPTIM in Set once mode.
|
|
* @param hlptim LPTIM handle
|
|
* @param Period Specifies the Autoreload value.
|
|
* This parameter must be a value between 0x0000 and 0xFFFF.
|
|
* @param Pulse Specifies the compare value.
|
|
* This parameter must be a value between 0x0000 and 0xFFFF.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
|
|
assert_param(IS_LPTIM_PERIOD(Period));
|
|
assert_param(IS_LPTIM_PULSE(Pulse));
|
|
|
|
/* Set the LPTIM state */
|
|
hlptim->State= HAL_LPTIM_STATE_BUSY;
|
|
|
|
/* Set WAVE bit to enable the set once mode */
|
|
hlptim->Instance->CFGR |= LPTIM_CFGR_WAVE;
|
|
|
|
/* Enable the Peripheral */
|
|
__HAL_LPTIM_ENABLE(hlptim);
|
|
|
|
/* Load the period value in the autoreload register */
|
|
__HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
|
|
|
|
/* Load the pulse value in the compare register */
|
|
__HAL_LPTIM_COMPARE_SET(hlptim, Pulse);
|
|
|
|
/* Start timer in continuous mode */
|
|
__HAL_LPTIM_START_SINGLE(hlptim);
|
|
|
|
/* Change the TIM state*/
|
|
hlptim->State= HAL_LPTIM_STATE_READY;
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Stops the LPTIM Set once mode.
|
|
* @param hlptim LPTIM handle
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop(LPTIM_HandleTypeDef *hlptim)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
|
|
|
|
/* Set the LPTIM state */
|
|
hlptim->State= HAL_LPTIM_STATE_BUSY;
|
|
|
|
/* Disable the Peripheral */
|
|
__HAL_LPTIM_DISABLE(hlptim);
|
|
|
|
/* Change the TIM state*/
|
|
hlptim->State= HAL_LPTIM_STATE_READY;
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Starts the LPTIM Set once mode in interrupt mode.
|
|
* @param hlptim LPTIM handle
|
|
* @param Period Specifies the Autoreload value.
|
|
* This parameter must be a value between 0x0000 and 0xFFFF.
|
|
* @param Pulse Specifies the compare value.
|
|
* This parameter must be a value between 0x0000 and 0xFFFF.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
|
|
assert_param(IS_LPTIM_PERIOD(Period));
|
|
assert_param(IS_LPTIM_PULSE(Pulse));
|
|
|
|
/* Set the LPTIM state */
|
|
hlptim->State= HAL_LPTIM_STATE_BUSY;
|
|
|
|
/* Set WAVE bit to enable the set once mode */
|
|
hlptim->Instance->CFGR |= LPTIM_CFGR_WAVE;
|
|
|
|
/* Enable Autoreload write complete interrupt */
|
|
__HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARROK);
|
|
|
|
/* Enable Compare write complete interrupt */
|
|
__HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPOK);
|
|
|
|
/* Enable Autoreload match interrupt */
|
|
__HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARRM);
|
|
|
|
/* Enable Compare match interrupt */
|
|
__HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPM);
|
|
|
|
/* If external trigger source is used, then enable external trigger interrupt */
|
|
if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE)
|
|
{
|
|
/* Enable external trigger interrupt */
|
|
__HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_EXTTRIG);
|
|
}
|
|
|
|
/* Enable the Peripheral */
|
|
__HAL_LPTIM_ENABLE(hlptim);
|
|
|
|
/* Load the period value in the autoreload register */
|
|
__HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
|
|
|
|
/* Load the pulse value in the compare register */
|
|
__HAL_LPTIM_COMPARE_SET(hlptim, Pulse);
|
|
|
|
/* Start timer in continuous mode */
|
|
__HAL_LPTIM_START_SINGLE(hlptim);
|
|
|
|
/* Change the TIM state*/
|
|
hlptim->State= HAL_LPTIM_STATE_READY;
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Stops the LPTIM Set once mode in interrupt mode.
|
|
* @param hlptim LPTIM handle
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop_IT(LPTIM_HandleTypeDef *hlptim)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
|
|
|
|
/* Set the LPTIM state */
|
|
hlptim->State= HAL_LPTIM_STATE_BUSY;
|
|
|
|
/* Disable the Peripheral */
|
|
__HAL_LPTIM_DISABLE(hlptim);
|
|
|
|
/* Disable Autoreload write complete interrupt */
|
|
__HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARROK);
|
|
|
|
/* Disable Compare write complete interrupt */
|
|
__HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPOK);
|
|
|
|
/* Disable Autoreload match interrupt */
|
|
__HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARRM);
|
|
|
|
/* Disable Compare match interrupt */
|
|
__HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPM);
|
|
|
|
/* If external trigger source is used, then disable external trigger interrupt */
|
|
if ((hlptim->Init.Trigger.Source) != LPTIM_TRIGSOURCE_SOFTWARE)
|
|
{
|
|
/* Disable external trigger interrupt */
|
|
__HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_EXTTRIG);
|
|
}
|
|
|
|
/* Change the TIM state*/
|
|
hlptim->State= HAL_LPTIM_STATE_READY;
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Starts the Encoder interface.
|
|
* @param hlptim LPTIM handle
|
|
* @param Period Specifies the Autoreload value.
|
|
* This parameter must be a value between 0x0000 and 0xFFFF.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_LPTIM_Encoder_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period)
|
|
{
|
|
uint32_t tmpcfgr = 0;
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
|
|
assert_param(IS_LPTIM_PERIOD(Period));
|
|
assert_param(hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC);
|
|
assert_param(hlptim->Init.Clock.Prescaler == LPTIM_PRESCALER_DIV1);
|
|
assert_param(IS_LPTIM_CLOCK_POLARITY(hlptim->Init.UltraLowPowerClock.Polarity));
|
|
|
|
/* Set the LPTIM state */
|
|
hlptim->State= HAL_LPTIM_STATE_BUSY;
|
|
|
|
/* Get the LPTIMx CFGR value */
|
|
tmpcfgr = hlptim->Instance->CFGR;
|
|
|
|
/* Clear CKPOL bits */
|
|
tmpcfgr &= (uint32_t)(~LPTIM_CFGR_CKPOL);
|
|
|
|
/* Set Input polarity */
|
|
tmpcfgr |= hlptim->Init.UltraLowPowerClock.Polarity;
|
|
|
|
/* Write to LPTIMx CFGR */
|
|
hlptim->Instance->CFGR = tmpcfgr;
|
|
|
|
/* Set ENC bit to enable the encoder interface */
|
|
hlptim->Instance->CFGR |= LPTIM_CFGR_ENC;
|
|
|
|
/* Enable the Peripheral */
|
|
__HAL_LPTIM_ENABLE(hlptim);
|
|
|
|
/* Load the period value in the autoreload register */
|
|
__HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
|
|
|
|
/* Start timer in continuous mode */
|
|
__HAL_LPTIM_START_CONTINUOUS(hlptim);
|
|
|
|
/* Change the TIM state*/
|
|
hlptim->State= HAL_LPTIM_STATE_READY;
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Stops the Encoder interface.
|
|
* @param hlptim LPTIM handle
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop(LPTIM_HandleTypeDef *hlptim)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
|
|
|
|
/* Set the LPTIM state */
|
|
hlptim->State= HAL_LPTIM_STATE_BUSY;
|
|
|
|
/* Disable the Peripheral */
|
|
__HAL_LPTIM_DISABLE(hlptim);
|
|
|
|
/* Reset ENC bit to disable the encoder interface */
|
|
hlptim->Instance->CFGR &= ~LPTIM_CFGR_ENC;
|
|
|
|
/* Change the TIM state*/
|
|
hlptim->State= HAL_LPTIM_STATE_READY;
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Starts the Encoder interface in interrupt mode.
|
|
* @param hlptim LPTIM handle
|
|
* @param Period Specifies the Autoreload value.
|
|
* This parameter must be a value between 0x0000 and 0xFFFF.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_LPTIM_Encoder_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period)
|
|
{
|
|
uint32_t tmpcfgr = 0;
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
|
|
assert_param(IS_LPTIM_PERIOD(Period));
|
|
assert_param(hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC);
|
|
assert_param(hlptim->Init.Clock.Prescaler == LPTIM_PRESCALER_DIV1);
|
|
assert_param(IS_LPTIM_CLOCK_POLARITY(hlptim->Init.UltraLowPowerClock.Polarity));
|
|
|
|
/* Set the LPTIM state */
|
|
hlptim->State= HAL_LPTIM_STATE_BUSY;
|
|
|
|
/* Configure edge sensitivity for encoder mode */
|
|
/* Get the LPTIMx CFGR value */
|
|
tmpcfgr = hlptim->Instance->CFGR;
|
|
|
|
/* Clear CKPOL bits */
|
|
tmpcfgr &= (uint32_t)(~LPTIM_CFGR_CKPOL);
|
|
|
|
/* Set Input polarity */
|
|
tmpcfgr |= hlptim->Init.UltraLowPowerClock.Polarity;
|
|
|
|
/* Write to LPTIMx CFGR */
|
|
hlptim->Instance->CFGR = tmpcfgr;
|
|
|
|
/* Set ENC bit to enable the encoder interface */
|
|
hlptim->Instance->CFGR |= LPTIM_CFGR_ENC;
|
|
|
|
/* Enable "switch to down direction" interrupt */
|
|
__HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_DOWN);
|
|
|
|
/* Enable "switch to up direction" interrupt */
|
|
__HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_UP);
|
|
|
|
/* Enable the Peripheral */
|
|
__HAL_LPTIM_ENABLE(hlptim);
|
|
|
|
/* Load the period value in the autoreload register */
|
|
__HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
|
|
|
|
/* Start timer in continuous mode */
|
|
__HAL_LPTIM_START_CONTINUOUS(hlptim);
|
|
|
|
/* Change the TIM state*/
|
|
hlptim->State= HAL_LPTIM_STATE_READY;
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Stops the Encoder interface in interrupt mode.
|
|
* @param hlptim LPTIM handle
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop_IT(LPTIM_HandleTypeDef *hlptim)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
|
|
|
|
/* Set the LPTIM state */
|
|
hlptim->State= HAL_LPTIM_STATE_BUSY;
|
|
|
|
/* Disable the Peripheral */
|
|
__HAL_LPTIM_DISABLE(hlptim);
|
|
|
|
/* Reset ENC bit to disable the encoder interface */
|
|
hlptim->Instance->CFGR &= ~LPTIM_CFGR_ENC;
|
|
|
|
/* Disable "switch to down direction" interrupt */
|
|
__HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_DOWN);
|
|
|
|
/* Disable "switch to up direction" interrupt */
|
|
__HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_UP);
|
|
|
|
/* Change the TIM state*/
|
|
hlptim->State= HAL_LPTIM_STATE_READY;
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Starts the Timeout function. The first trigger event will start the
|
|
* timer, any successive trigger event will reset the counter and
|
|
* the timer restarts.
|
|
* @param hlptim LPTIM handle
|
|
* @param Period Specifies the Autoreload value.
|
|
* This parameter must be a value between 0x0000 and 0xFFFF.
|
|
* @param Timeout Specifies the TimeOut value to rest the counter.
|
|
* This parameter must be a value between 0x0000 and 0xFFFF.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Timeout)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
|
|
assert_param(IS_LPTIM_PERIOD(Period));
|
|
assert_param(IS_LPTIM_PULSE(Timeout));
|
|
|
|
/* Set the LPTIM state */
|
|
hlptim->State= HAL_LPTIM_STATE_BUSY;
|
|
|
|
/* Set TIMOUT bit to enable the timeout function */
|
|
hlptim->Instance->CFGR |= LPTIM_CFGR_TIMOUT;
|
|
|
|
/* Enable the Peripheral */
|
|
__HAL_LPTIM_ENABLE(hlptim);
|
|
|
|
/* Load the period value in the autoreload register */
|
|
__HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
|
|
|
|
/* Load the Timeout value in the compare register */
|
|
__HAL_LPTIM_COMPARE_SET(hlptim, Timeout);
|
|
|
|
/* Start timer in continuous mode */
|
|
__HAL_LPTIM_START_CONTINUOUS(hlptim);
|
|
|
|
/* Change the TIM state*/
|
|
hlptim->State= HAL_LPTIM_STATE_READY;
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Stops the Timeout function.
|
|
* @param hlptim LPTIM handle
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop(LPTIM_HandleTypeDef *hlptim)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
|
|
|
|
/* Set the LPTIM state */
|
|
hlptim->State= HAL_LPTIM_STATE_BUSY;
|
|
|
|
/* Disable the Peripheral */
|
|
__HAL_LPTIM_DISABLE(hlptim);
|
|
|
|
/* Reset TIMOUT bit to enable the timeout function */
|
|
hlptim->Instance->CFGR &= ~LPTIM_CFGR_TIMOUT;
|
|
|
|
/* Change the TIM state*/
|
|
hlptim->State= HAL_LPTIM_STATE_READY;
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Starts the Timeout function in interrupt mode. The first trigger
|
|
* event will start the timer, any successive trigger event will reset
|
|
* the counter and the timer restarts.
|
|
* @param hlptim LPTIM handle
|
|
* @param Period Specifies the Autoreload value.
|
|
* This parameter must be a value between 0x0000 and 0xFFFF.
|
|
* @param Timeout Specifies the TimeOut value to rest the counter.
|
|
* This parameter must be a value between 0x0000 and 0xFFFF.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Timeout)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
|
|
assert_param(IS_LPTIM_PERIOD(Period));
|
|
assert_param(IS_LPTIM_PULSE(Timeout));
|
|
|
|
/* Set the LPTIM state */
|
|
hlptim->State= HAL_LPTIM_STATE_BUSY;
|
|
|
|
/* Enable EXTI Line interrupt on the LPTIM Wake-up Timer */
|
|
__HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_IT();
|
|
|
|
/* Enable rising edge trigger on the LPTIM Wake-up Timer Exti line */
|
|
__HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();
|
|
|
|
/* Set TIMOUT bit to enable the timeout function */
|
|
hlptim->Instance->CFGR |= LPTIM_CFGR_TIMOUT;
|
|
|
|
/* Enable Compare match interrupt */
|
|
__HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPM);
|
|
|
|
/* Enable the Peripheral */
|
|
__HAL_LPTIM_ENABLE(hlptim);
|
|
|
|
/* Load the period value in the autoreload register */
|
|
__HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
|
|
|
|
/* Load the Timeout value in the compare register */
|
|
__HAL_LPTIM_COMPARE_SET(hlptim, Timeout);
|
|
|
|
/* Start timer in continuous mode */
|
|
__HAL_LPTIM_START_CONTINUOUS(hlptim);
|
|
|
|
/* Change the TIM state*/
|
|
hlptim->State= HAL_LPTIM_STATE_READY;
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Stops the Timeout function in interrupt mode.
|
|
* @param hlptim LPTIM handle
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop_IT(LPTIM_HandleTypeDef *hlptim)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
|
|
|
|
/* Set the LPTIM state */
|
|
hlptim->State= HAL_LPTIM_STATE_BUSY;
|
|
|
|
/* Disable rising edge trigger on the LPTIM Wake-up Timer Exti line */
|
|
__HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();
|
|
|
|
/* Disable EXTI Line interrupt on the LPTIM Wake-up Timer */
|
|
__HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_IT();
|
|
|
|
/* Disable the Peripheral */
|
|
__HAL_LPTIM_DISABLE(hlptim);
|
|
|
|
/* Reset TIMOUT bit to enable the timeout function */
|
|
hlptim->Instance->CFGR &= ~LPTIM_CFGR_TIMOUT;
|
|
|
|
/* Disable Compare match interrupt */
|
|
__HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPM);
|
|
|
|
/* Change the TIM state*/
|
|
hlptim->State= HAL_LPTIM_STATE_READY;
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Starts the Counter mode.
|
|
* @param hlptim LPTIM handle
|
|
* @param Period Specifies the Autoreload value.
|
|
* This parameter must be a value between 0x0000 and 0xFFFF.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_LPTIM_Counter_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
|
|
assert_param(IS_LPTIM_PERIOD(Period));
|
|
|
|
/* Set the LPTIM state */
|
|
hlptim->State= HAL_LPTIM_STATE_BUSY;
|
|
|
|
/* If clock source is not ULPTIM clock and counter source is external, then it must not be prescaled */
|
|
if((hlptim->Init.Clock.Source != LPTIM_CLOCKSOURCE_ULPTIM) && (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL))
|
|
{
|
|
/* Check if clock is prescaled */
|
|
assert_param(IS_LPTIM_CLOCK_PRESCALERDIV1(hlptim->Init.Clock.Prescaler));
|
|
/* Set clock prescaler to 0 */
|
|
hlptim->Instance->CFGR &= ~LPTIM_CFGR_PRESC;
|
|
}
|
|
|
|
/* Enable the Peripheral */
|
|
__HAL_LPTIM_ENABLE(hlptim);
|
|
|
|
/* Load the period value in the autoreload register */
|
|
__HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
|
|
|
|
/* Start timer in continuous mode */
|
|
__HAL_LPTIM_START_CONTINUOUS(hlptim);
|
|
|
|
/* Change the TIM state*/
|
|
hlptim->State= HAL_LPTIM_STATE_READY;
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Stops the Counter mode.
|
|
* @param hlptim LPTIM handle
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_LPTIM_Counter_Stop(LPTIM_HandleTypeDef *hlptim)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
|
|
|
|
/* Set the LPTIM state */
|
|
hlptim->State= HAL_LPTIM_STATE_BUSY;
|
|
|
|
/* Disable the Peripheral */
|
|
__HAL_LPTIM_DISABLE(hlptim);
|
|
|
|
/* Change the TIM state*/
|
|
hlptim->State= HAL_LPTIM_STATE_READY;
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Starts the Counter mode in interrupt mode.
|
|
* @param hlptim LPTIM handle
|
|
* @param Period Specifies the Autoreload value.
|
|
* This parameter must be a value between 0x0000 and 0xFFFF.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_LPTIM_Counter_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
|
|
assert_param(IS_LPTIM_PERIOD(Period));
|
|
|
|
/* Set the LPTIM state */
|
|
hlptim->State= HAL_LPTIM_STATE_BUSY;
|
|
|
|
/* Enable EXTI Line interrupt on the LPTIM Wake-up Timer */
|
|
__HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_IT();
|
|
|
|
/* Enable rising edge trigger on the LPTIM Wake-up Timer Exti line */
|
|
__HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();
|
|
|
|
/* If clock source is not ULPTIM clock and counter source is external, then it must not be prescaled */
|
|
if((hlptim->Init.Clock.Source != LPTIM_CLOCKSOURCE_ULPTIM) && (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL))
|
|
{
|
|
/* Check if clock is prescaled */
|
|
assert_param(IS_LPTIM_CLOCK_PRESCALERDIV1(hlptim->Init.Clock.Prescaler));
|
|
/* Set clock prescaler to 0 */
|
|
hlptim->Instance->CFGR &= ~LPTIM_CFGR_PRESC;
|
|
}
|
|
|
|
/* Enable Autoreload write complete interrupt */
|
|
__HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARROK);
|
|
|
|
/* Enable Autoreload match interrupt */
|
|
__HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARRM);
|
|
|
|
/* Enable the Peripheral */
|
|
__HAL_LPTIM_ENABLE(hlptim);
|
|
|
|
/* Load the period value in the autoreload register */
|
|
__HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
|
|
|
|
/* Start timer in continuous mode */
|
|
__HAL_LPTIM_START_CONTINUOUS(hlptim);
|
|
|
|
/* Change the TIM state*/
|
|
hlptim->State= HAL_LPTIM_STATE_READY;
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Stops the Counter mode in interrupt mode.
|
|
* @param hlptim LPTIM handle
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_LPTIM_Counter_Stop_IT(LPTIM_HandleTypeDef *hlptim)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
|
|
|
|
/* Set the LPTIM state */
|
|
hlptim->State= HAL_LPTIM_STATE_BUSY;
|
|
|
|
/* Disable rising edge trigger on the LPTIM Wake-up Timer Exti line */
|
|
__HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();
|
|
|
|
/* Disable EXTI Line interrupt on the LPTIM Wake-up Timer */
|
|
__HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_IT();
|
|
|
|
/* Disable the Peripheral */
|
|
__HAL_LPTIM_DISABLE(hlptim);
|
|
|
|
/* Disable Autoreload write complete interrupt */
|
|
__HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARROK);
|
|
|
|
/* Disable Autoreload match interrupt */
|
|
__HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARRM);
|
|
|
|
/* Change the TIM state*/
|
|
hlptim->State= HAL_LPTIM_STATE_READY;
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup LPTIM_Group3 LPTIM Read operation functions
|
|
* @brief Read operation functions.
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### LPTIM Read operation functions #####
|
|
==============================================================================
|
|
[..] This section provides LPTIM Reading functions.
|
|
(+) Read the counter value.
|
|
(+) Read the period (Auto-reload) value.
|
|
(+) Read the pulse (Compare)value.
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief This function returns the current counter value.
|
|
* @param hlptim LPTIM handle
|
|
* @retval Counter value.
|
|
*/
|
|
uint32_t HAL_LPTIM_ReadCounter(LPTIM_HandleTypeDef *hlptim)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
|
|
|
|
return (hlptim->Instance->CNT);
|
|
}
|
|
|
|
/**
|
|
* @brief This function return the current Autoreload (Period) value.
|
|
* @param hlptim LPTIM handle
|
|
* @retval Autoreload value.
|
|
*/
|
|
uint32_t HAL_LPTIM_ReadAutoReload(LPTIM_HandleTypeDef *hlptim)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
|
|
|
|
return (hlptim->Instance->ARR);
|
|
}
|
|
|
|
/**
|
|
* @brief This function return the current Compare (Pulse) value.
|
|
* @param hlptim LPTIM handle
|
|
* @retval Compare value.
|
|
*/
|
|
uint32_t HAL_LPTIM_ReadCompare(LPTIM_HandleTypeDef *hlptim)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
|
|
|
|
return (hlptim->Instance->CMP);
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
|
|
/** @defgroup LPTIM_Group4 LPTIM IRQ handler
|
|
* @brief LPTIM IRQ handler.
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### LPTIM IRQ handler #####
|
|
==============================================================================
|
|
[..] This section provides LPTIM IRQ handler function.
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief This function handles LPTIM interrupt request.
|
|
* @param hlptim LPTIM handle
|
|
* @retval None
|
|
*/
|
|
void HAL_LPTIM_IRQHandler(LPTIM_HandleTypeDef *hlptim)
|
|
{
|
|
/* Compare match interrupt */
|
|
if(__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_CMPM) != RESET)
|
|
{
|
|
if(__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_CMPM) !=RESET)
|
|
{
|
|
/* Clear Compare match flag */
|
|
__HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPM);
|
|
/* Compare match Callback */
|
|
#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1)
|
|
hlptim->CompareMatchCallback(hlptim);
|
|
#else
|
|
HAL_LPTIM_CompareMatchCallback(hlptim);
|
|
#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */
|
|
}
|
|
}
|
|
|
|
/* Autoreload match interrupt */
|
|
if(__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_ARRM) != RESET)
|
|
{
|
|
if(__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_ARRM) !=RESET)
|
|
{
|
|
/* Clear Autoreload match flag */
|
|
__HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARRM);
|
|
/* Autoreload match Callback */
|
|
#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1)
|
|
hlptim->AutoReloadMatchCallback(hlptim);
|
|
#else
|
|
HAL_LPTIM_AutoReloadMatchCallback(hlptim);
|
|
#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */
|
|
}
|
|
}
|
|
|
|
/* Trigger detected interrupt */
|
|
if(__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_EXTTRIG) != RESET)
|
|
{
|
|
if(__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_EXTTRIG) !=RESET)
|
|
{
|
|
/* Clear Trigger detected flag */
|
|
__HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_EXTTRIG);
|
|
/* Trigger detected callback */
|
|
#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1)
|
|
hlptim->TriggerCallback(hlptim);
|
|
#else
|
|
HAL_LPTIM_TriggerCallback(hlptim);
|
|
#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */
|
|
}
|
|
}
|
|
|
|
/* Compare write interrupt */
|
|
if(__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_CMPOK) != RESET)
|
|
{
|
|
if(__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_FLAG_CMPM) !=RESET)
|
|
{
|
|
/* Clear Compare write flag */
|
|
__HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPOK);
|
|
/* Compare write Callback */
|
|
#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1)
|
|
hlptim->CompareWriteCallback(hlptim);
|
|
#else
|
|
HAL_LPTIM_CompareWriteCallback(hlptim);
|
|
#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */
|
|
}
|
|
}
|
|
|
|
/* Autoreload write interrupt */
|
|
if(__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_ARROK) != RESET)
|
|
{
|
|
if(__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_ARROK) !=RESET)
|
|
{
|
|
/* Clear Autoreload write flag */
|
|
__HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK);
|
|
/* Autoreload write Callback */
|
|
#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1)
|
|
hlptim->AutoReloadWriteCallback(hlptim);
|
|
#else
|
|
HAL_LPTIM_AutoReloadWriteCallback(hlptim);
|
|
#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */
|
|
}
|
|
}
|
|
|
|
/* Direction counter changed from Down to Up interrupt */
|
|
if(__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_UP) != RESET)
|
|
{
|
|
if(__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_UP) !=RESET)
|
|
{
|
|
/* Clear Direction counter changed from Down to Up flag */
|
|
__HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_UP);
|
|
/* Direction counter changed from Down to Up Callback */
|
|
#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1)
|
|
hlptim->DirectionUpCallback(hlptim);
|
|
#else
|
|
HAL_LPTIM_DirectionUpCallback(hlptim);
|
|
#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */
|
|
}
|
|
}
|
|
|
|
/* Direction counter changed from Up to Down interrupt */
|
|
if(__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_DOWN) != RESET)
|
|
{
|
|
if(__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_DOWN) !=RESET)
|
|
{
|
|
/* Clear Direction counter changed from Up to Down flag */
|
|
__HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_DOWN);
|
|
/* Direction counter changed from Up to Down Callback */
|
|
#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1)
|
|
hlptim->DirectionDownCallback(hlptim);
|
|
#else
|
|
HAL_LPTIM_DirectionDownCallback(hlptim);
|
|
#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */
|
|
}
|
|
}
|
|
|
|
__HAL_LPTIM_WAKEUPTIMER_EXTI_CLEAR_FLAG();
|
|
}
|
|
|
|
/**
|
|
* @brief Compare match callback in non blocking mode
|
|
* @param hlptim LPTIM handle
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_LPTIM_CompareMatchCallback(LPTIM_HandleTypeDef *hlptim)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hlptim);
|
|
|
|
/* NOTE : This function Should not be modified, when the callback is needed,
|
|
the HAL_LPTIM_CompareMatchCallback could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief Autoreload match callback in non blocking mode
|
|
* @param hlptim LPTIM handle
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_LPTIM_AutoReloadMatchCallback(LPTIM_HandleTypeDef *hlptim)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hlptim);
|
|
|
|
/* NOTE : This function Should not be modified, when the callback is needed,
|
|
the HAL_LPTIM_AutoReloadMatchCallback could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief Trigger detected callback in non blocking mode
|
|
* @param hlptim LPTIM handle
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_LPTIM_TriggerCallback(LPTIM_HandleTypeDef *hlptim)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hlptim);
|
|
|
|
/* NOTE : This function Should not be modified, when the callback is needed,
|
|
the HAL_LPTIM_TriggerCallback could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief Compare write callback in non blocking mode
|
|
* @param hlptim LPTIM handle
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_LPTIM_CompareWriteCallback(LPTIM_HandleTypeDef *hlptim)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hlptim);
|
|
|
|
/* NOTE : This function Should not be modified, when the callback is needed,
|
|
the HAL_LPTIM_CompareWriteCallback could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief Autoreload write callback in non blocking mode
|
|
* @param hlptim LPTIM handle
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_LPTIM_AutoReloadWriteCallback(LPTIM_HandleTypeDef *hlptim)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hlptim);
|
|
|
|
/* NOTE : This function Should not be modified, when the callback is needed,
|
|
the HAL_LPTIM_AutoReloadWriteCallback could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief Direction counter changed from Down to Up callback in non blocking mode
|
|
* @param hlptim LPTIM handle
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_LPTIM_DirectionUpCallback(LPTIM_HandleTypeDef *hlptim)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hlptim);
|
|
|
|
/* NOTE : This function Should not be modified, when the callback is needed,
|
|
the HAL_LPTIM_DirectionUpCallback could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief Direction counter changed from Up to Down callback in non blocking mode
|
|
* @param hlptim LPTIM handle
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_LPTIM_DirectionDownCallback(LPTIM_HandleTypeDef *hlptim)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hlptim);
|
|
|
|
/* NOTE : This function Should not be modified, when the callback is needed,
|
|
the HAL_LPTIM_DirectionDownCallback could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1)
|
|
/**
|
|
* @brief Register user LPTIM callback to be used instead of the weak predefined callback
|
|
* @param hlptim lptim handle
|
|
* @param CallbackID ID of the callback to be registered
|
|
* This parameter can be one of the following values:
|
|
* @arg @ref HAL_LPTIM_MSPINIT_CB_ID MspInit Callback ID
|
|
* @arg @ref HAL_LPTIM_MSPDEINIT_CB_ID MspDeInit Callback ID
|
|
* @arg @ref HAL_LPTIM_COMPARE_MATCH_CB_ID Compare Match Callback ID
|
|
* @arg @ref HAL_LPTIM_AUTO_RELOAD_MATCH_CB_ID Auto Reload Match Callback ID
|
|
* @arg @ref HAL_LPTIM_TRIGGER_CB_ID Trigger Callback ID
|
|
* @arg @ref HAL_LPTIM_COMPARE_WRITE_CB_ID Compare Write Callback ID
|
|
* @arg @ref HAL_LPTIM_AUTO_RELOAD_WRITE_CB_ID Auto Reload Write Callback ID
|
|
* @arg @ref HAL_LPTIM_DIRECTION_UP_CB_ID Direction UP Callback ID
|
|
* @arg @ref HAL_LPTIM_DIRECTION_DOWN_CB_ID Direction Down Callback ID
|
|
* @param pCallback pointer to the callback function
|
|
* @retval status
|
|
*/
|
|
HAL_StatusTypeDef HAL_LPTIM_RegisterCallback(LPTIM_HandleTypeDef *hlptim, HAL_LPTIM_CallbackIDTypeDef CallbackID, pLPTIM_CallbackTypeDef pCallback)
|
|
{
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
|
|
if(pCallback == NULL)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
/* Process locked */
|
|
__HAL_LOCK(hlptim);
|
|
|
|
if(hlptim->State == HAL_LPTIM_STATE_READY)
|
|
{
|
|
switch (CallbackID)
|
|
{
|
|
case HAL_LPTIM_MSPINIT_CB_ID :
|
|
hlptim->MspInitCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_LPTIM_MSPDEINIT_CB_ID :
|
|
hlptim->MspDeInitCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_LPTIM_COMPARE_MATCH_CB_ID :
|
|
hlptim->CompareMatchCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_LPTIM_AUTO_RELOAD_MATCH_CB_ID :
|
|
hlptim->AutoReloadMatchCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_LPTIM_TRIGGER_CB_ID :
|
|
hlptim->TriggerCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_LPTIM_COMPARE_WRITE_CB_ID :
|
|
hlptim->CompareWriteCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_LPTIM_AUTO_RELOAD_WRITE_CB_ID :
|
|
hlptim->AutoReloadWriteCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_LPTIM_DIRECTION_UP_CB_ID :
|
|
hlptim->DirectionUpCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_LPTIM_DIRECTION_DOWN_CB_ID :
|
|
hlptim->DirectionDownCallback = pCallback;
|
|
break;
|
|
|
|
default :
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
break;
|
|
}
|
|
}
|
|
else if(hlptim->State == HAL_LPTIM_STATE_RESET)
|
|
{
|
|
switch (CallbackID)
|
|
{
|
|
case HAL_LPTIM_MSPINIT_CB_ID :
|
|
hlptim->MspInitCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_LPTIM_MSPDEINIT_CB_ID :
|
|
hlptim->MspDeInitCallback = pCallback;
|
|
break;
|
|
|
|
default :
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
break;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
}
|
|
|
|
/* Release Lock */
|
|
__HAL_UNLOCK(hlptim);
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* @brief UnRegister user LPTIM callback
|
|
* LPTIM callback is redirected to the weak predefined callback
|
|
* @param hlptim lptim handle
|
|
* @param CallbackID ID of the callback to be unregistered
|
|
+ * This parameter can be one of the following values:
|
|
+ * @arg @ref HAL_LPTIM_MSPINIT_CB_ID MspInit Callback ID
|
|
+ * @arg @ref HAL_LPTIM_MSPDEINIT_CB_ID MspDeInit Callback ID
|
|
+ * @arg @ref HAL_LPTIM_COMPARE_MATCH_CB_ID Compare Match Callback ID
|
|
+ * @arg @ref HAL_LPTIM_AUTO_RELOAD_MATCH_CB_ID Auto Reload Match Callback ID
|
|
+ * @arg @ref HAL_LPTIM_TRIGGER_CB_ID Trigger Callback ID
|
|
+ * @arg @ref HAL_LPTIM_COMPARE_WRITE_CB_ID Compare Write Callback ID
|
|
+ * @arg @ref HAL_LPTIM_AUTO_RELOAD_WRITE_CB_ID Auto Reload Write Callback ID
|
|
+ * @arg @ref HAL_LPTIM_DIRECTION_UP_CB_ID Direction UP Callback ID
|
|
+ * @arg @ref HAL_LPTIM_DIRECTION_DOWN_CB_ID Direction Down Callback ID
|
|
* @retval status
|
|
*/
|
|
HAL_StatusTypeDef HAL_LPTIM_UnRegisterCallback(LPTIM_HandleTypeDef *hlptim, HAL_LPTIM_CallbackIDTypeDef CallbackID)
|
|
{
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
|
|
/* Process locked */
|
|
__HAL_LOCK(hlptim);
|
|
|
|
if(hlptim->State == HAL_LPTIM_STATE_READY)
|
|
{
|
|
switch (CallbackID)
|
|
{
|
|
case HAL_LPTIM_MSPINIT_CB_ID :
|
|
hlptim->MspInitCallback = HAL_LPTIM_MspInit; /* Legacy weak MspInit Callback */
|
|
break;
|
|
|
|
case HAL_LPTIM_MSPDEINIT_CB_ID :
|
|
hlptim->MspDeInitCallback = HAL_LPTIM_MspDeInit; /* Legacy weak MspDeInit Callback */
|
|
break;
|
|
|
|
case HAL_LPTIM_COMPARE_MATCH_CB_ID :
|
|
hlptim->CompareMatchCallback = HAL_LPTIM_CompareMatchCallback; /* Legacy weak Compare Match Callback */
|
|
break;
|
|
|
|
case HAL_LPTIM_AUTO_RELOAD_MATCH_CB_ID :
|
|
hlptim->AutoReloadMatchCallback = HAL_LPTIM_AutoReloadMatchCallback; /* Legacy weak Auto Reload Match Callback */
|
|
break;
|
|
|
|
case HAL_LPTIM_TRIGGER_CB_ID :
|
|
hlptim->TriggerCallback = HAL_LPTIM_TriggerCallback; /* Legacy weak Trigger Callback */
|
|
break;
|
|
|
|
case HAL_LPTIM_COMPARE_WRITE_CB_ID :
|
|
hlptim->CompareWriteCallback = HAL_LPTIM_CompareWriteCallback; /* Legacy weak Compare Write Callback */
|
|
break;
|
|
|
|
case HAL_LPTIM_AUTO_RELOAD_WRITE_CB_ID :
|
|
hlptim->AutoReloadWriteCallback = HAL_LPTIM_AutoReloadWriteCallback; /* Legacy weak Auto Reload Write Callback */
|
|
break;
|
|
|
|
case HAL_LPTIM_DIRECTION_UP_CB_ID :
|
|
hlptim->DirectionUpCallback = HAL_LPTIM_DirectionUpCallback; /* Legacy weak Direction Up Callback */
|
|
break;
|
|
|
|
case HAL_LPTIM_DIRECTION_DOWN_CB_ID :
|
|
hlptim->DirectionDownCallback = HAL_LPTIM_DirectionDownCallback; /* Legacy weak Direction Down Callback */
|
|
break;
|
|
|
|
default :
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
break;
|
|
}
|
|
}
|
|
else if(hlptim->State == HAL_LPTIM_STATE_RESET)
|
|
{
|
|
switch (CallbackID)
|
|
{
|
|
case HAL_LPTIM_MSPINIT_CB_ID :
|
|
hlptim->MspInitCallback = HAL_LPTIM_MspInit; /* Legacy weak MspInit Callback */
|
|
break;
|
|
|
|
case HAL_LPTIM_MSPDEINIT_CB_ID :
|
|
hlptim->MspDeInitCallback = HAL_LPTIM_MspDeInit; /* Legacy weak MspDeInit Callback */
|
|
break;
|
|
|
|
default :
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
break;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
}
|
|
|
|
/* Release Lock */
|
|
__HAL_UNLOCK(hlptim);
|
|
|
|
return status;
|
|
}
|
|
#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup LPTIM_Group5 Peripheral State functions
|
|
* @brief Peripheral State functions.
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### Peripheral State functions #####
|
|
==============================================================================
|
|
[..]
|
|
This subsection permits to get in run-time the status of the peripheral.
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Returns the LPTIM state.
|
|
* @param hlptim LPTIM handle
|
|
* @retval HAL state
|
|
*/
|
|
HAL_LPTIM_StateTypeDef HAL_LPTIM_GetState(LPTIM_HandleTypeDef *hlptim)
|
|
{
|
|
return hlptim->State;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#endif /* HAL_LPTIM_MODULE_ENABLED */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|