OrgST-Microelectronics/STM32CubeF4
1
0
Fork 0
mirror of https://github.com/STMicroelectronics/STM32CubeF4.git synced 2025-05-03 22:17:07 +08:00
Code Issues Releases Wiki Activity
STM32CubeF4/Drivers/BSP/STM32F413H-Discovery/stm32f413h_discovery.h
rihab kouki 3d6be4bd40 Release v1.27.0
2022-03-09 10:37:11 +01:00

288 lines
9.7 KiB
C
Raw Blame History

/**
******************************************************************************
* @file stm32f413h_discovery.h
* @author MCD Application Team
* @brief This file contains definitions for STM32F413H_DISCOVERY's LEDs,
* push-buttons and COM ports hardware resources.
******************************************************************************
* @attention
*
* Copyright (c) 2017 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* IMPORTANT: One of the following flags must be defined in the preprocessor */
/* options in order to select the target board revision: !!!!!!!!!! */
/* USE_STM32F413H_DISCOVERY */ /* Applicable for all boards execept STM32F413H DISCOVERY REVE */
/* USE_STM32F413H_DISCOVERY_REVE */ /* Applicable only for STM32F413H DISCOVERY REVE */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F413H_DISCOVERY_H
#define __STM32F413H_DISCOVERY_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
/** @addtogroup BSP
* @{
*/
/** @addtogroup STM32F413H_DISCOVERY
* @{
*/
/** @addtogroup STM32F413H_DISCOVERY_LOW_LEVEL
* @{
*/
/** @defgroup STM32F413H_DISCOVERY_LOW_LEVEL_Exported_Types STM32F413H DISCOVERY Low Level Exported Types
* @{
*/
typedef enum
{
LED3 = 0,
LED_GREEN = LED3,
LED4 = 1,
LED_RED = LED4,
}Led_TypeDef;
typedef enum
{
BUTTON_WAKEUP = 0
}Button_TypeDef;
typedef enum
{
BUTTON_MODE_GPIO = 0,
BUTTON_MODE_EXTI = 1
}ButtonMode_TypeDef;
typedef enum
{
COM1 = 0,
}COM_TypeDef;
/**
* @}
*/
/** @defgroup STM32F413H_DISCOVERY_LOW_LEVEL_Exported_Constants STM32F413H DISCOVERY Low Level Exported Constants
* @{
*/
/**
* @brief Define for STM32F413H_DISCOVERY board
*/
#if !defined(USE_STM32F413H_DISCOVERY_REVE) && \
!defined(USE_STM32F413H_DISCOVERY)
#define USE_STM32F413H_DISCOVERY
#endif
/** @addtogroup STM32F413H_DISCOVERY_LOW_LEVEL_LED STM32F413H DISCOVERY Low Level Led
* @{
*/
#define LEDn ((uint8_t)2)
#define LED4_GPIO_PORT GPIOE
#define LED4_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE()
#define LED4_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE()
#define LED3_GPIO_PORT GPIOC
#define LED3_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE()
#define LED3_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE()
#define LED4_PIN GPIO_PIN_3
#define LED3_PIN GPIO_PIN_5
#define LEDx_GPIO_CLK_ENABLE(__INDEX__) do{if((__INDEX__) == 0) LED3_GPIO_CLK_ENABLE(); else \
if((__INDEX__) == 1) LED4_GPIO_CLK_ENABLE(); \
}while(0)
#define LEDx_GPIO_CLK_DISABLE(__INDEX__) do{if((__INDEX__) == 0) LED3_GPIO_CLK_DISABLE(); else \
if((__INDEX__) == 1) LED4_GPIO_CLK_DISABLE(); \
}while(0)
/**
* @}
*/
/** @addtogroup STM32F413H_DISCOVERY_LOW_LEVEL_BUTTON STM32F413H DISCOVERY Low Level Button
* @{
*/
/* Only one User/Wakeup button */
#define BUTTONn ((uint8_t)1)
/**
* @brief Wakeup push-button
*/
#define WAKEUP_BUTTON_PIN GPIO_PIN_0
#define WAKEUP_BUTTON_GPIO_PORT GPIOA
#define WAKEUP_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
#define WAKEUP_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
#define WAKEUP_BUTTON_EXTI_IRQn EXTI0_IRQn
/**
* @}
*/
/** @addtogroup STM32F413H_DISCOVERY_LOW_LEVEL_SIGNAL
* @{
*/
/**
* @brief SD-detect signal
*/
#define SD_DETECT_PIN GPIO_PIN_11
#define SD_DETECT_GPIO_PORT GPIOF
#define SD_DETECT_GPIO_CLK_ENABLE() __HAL_RCC_GPIOF_CLK_ENABLE()
#define SD_DETECT_GPIO_CLK_DISABLE() __HAL_RCC_GPIOF_CLK_DISABLE()
#define SD_DETECT_EXTI_IRQn EXTI15_10_IRQn
/**
* @brief TS INT pin
*/
#define TS_INT_PIN GPIO_PIN_1
#define TS_INT_GPIO_PORT GPIOC
#define TS_INT_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE()
#define TS_INT_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE()
#define TS_INT_EXTI_IRQn EXTI1_IRQn
/**
* @brief TS RST pin
*/
#define TS_RESET_PIN GPIO_PIN_13
#define TS_RESET_GPIO_PORT GPIOB
#define TS_RESET_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
#define TS_RESET_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
#define TS_RESET_EXTI_IRQn EXTI15_10_IRQn
/**
* @}
*/
/** @addtogroup STM32F413H_DISCOVERY_LOW_LEVEL_COM STM32F413H DISCOVERY Low Level COM
* @{
*/
#define COMn ((uint8_t)1)
/**
* @brief Definition for COM port1, connected to USART6
*/
#define DISCOVERY_COM1 USART6
#define DISCOVERY_COM1_CLK_ENABLE() __HAL_RCC_USART6_CLK_ENABLE()
#define DISCOVERY_COM1_CLK_DISABLE() __HAL_RCC_USART6_CLK_DISABLE()
#define DISCOVERY_COM1_TX_PIN GPIO_PIN_14
#define DISCOVERY_COM1_TX_GPIO_PORT GPIOG
#define DISCOVERY_COM1_TX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOG_CLK_ENABLE()
#define DISCOVERY_COM1_TX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOG_CLK_DISABLE()
#define DISCOVERY_COM1_TX_AF GPIO_AF8_USART6
#define DISCOVERY_COM1_RX_PIN GPIO_PIN_9
#define DISCOVERY_COM1_RX_GPIO_PORT GPIOG
#define DISCOVERY_COM1_RX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOG_CLK_ENABLE()
#define DISCOVERY_COM1_RX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOG_CLK_DISABLE()
#define DISCOVERY_COM1_RX_AF GPIO_AF8_USART6
#define DISCOVERY_COM1_IRQn USART6_IRQn
#define DISCOVERY_COMx_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == COM1) {DISCOVERY_COM1_CLK_ENABLE();} } while(0)
#define DISCOVERY_COMx_CLK_DISABLE(__INDEX__) (((__INDEX__) == 0) ? DISCOVERY_COM1_CLK_DISABLE() : 0)
#define DISCOVERY_COMx_TX_GPIO_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == COM1) {DISCOVERY_COM1_TX_GPIO_CLK_ENABLE();} } while(0)
#define DISCOVERY_COMx_TX_GPIO_CLK_DISABLE(__INDEX__) (((__INDEX__) == 0) ? DISCOVERY_COM1_TX_GPIO_CLK_DISABLE() : 0)
#define DISCOVERY_COMx_RX_GPIO_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == COM1) {DISCOVERY_COM1_RX_GPIO_CLK_ENABLE();} } while(0)
#define DISCOVERY_COMx_RX_GPIO_CLK_DISABLE(__INDEX__) (((__INDEX__) == 0) ? DISCOVERY_COM1_RX_GPIO_CLK_DISABLE() : 0)
/* Exported constant IO ------------------------------------------------------*/
#define AUDIO_I2C_ADDRESS ((uint16_t)0x34)
#define EEPROM_I2C_ADDRESS_A01 ((uint16_t)0xA0)
#define EEPROM_I2C_ADDRESS_A02 ((uint16_t)0xA6)
#define TS_I2C_ADDRESS ((uint16_t)0x70)
/* User can use this section to tailor I2Cx/I2Cx instance used and associated
resources */
/* Definition for AUDIO I2Cx resources */
#define DISCOVERY_AUDIO_I2Cx FMPI2C1
#define DISCOVERY_AUDIO_I2Cx_CLK_ENABLE() __HAL_RCC_FMPI2C1_CLK_ENABLE()
#define DISCOVERY_AUDIO_DMAx_CLK_ENABLE() __HAL_RCC_DMA1_CLK_ENABLE()
#define DISCOVERY_AUDIO_I2Cx_SCL_SDA_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE()
#define DISCOVERY_AUDIO_I2Cx_FORCE_RESET() __HAL_RCC_FMPI2C1_FORCE_RESET()
#define DISCOVERY_AUDIO_I2Cx_RELEASE_RESET() __HAL_RCC_FMPI2C1_RELEASE_RESET()
/* Definition for I2Cx Pins */
#define DISCOVERY_AUDIO_I2Cx_SCL_PIN GPIO_PIN_6
#define DISCOVERY_AUDIO_I2Cx_SCL_SDA_GPIO_PORT GPIOC
#define DISCOVERY_AUDIO_I2Cx_SCL_SDA_AF GPIO_AF4_FMPI2C1
#define DISCOVERY_AUDIO_I2Cx_SDA_PIN GPIO_PIN_7
/* I2C interrupt requests */
#define DISCOVERY_AUDIO_I2Cx_EV_IRQn FMPI2C1_EV_IRQn
#define DISCOVERY_AUDIO_I2Cx_ER_IRQn FMPI2C1_ER_IRQn
/* I2C clock speed configuration (in Hz)
WARNING:
Make sure that this define is not already declared in other files.
It can be used in parallel by other modules. */
#ifndef DISCOVERY_I2C_SPEED
#define DISCOVERY_I2C_SPEED 100000
#endif /* DISCOVERY_I2C_SPEED */
#ifndef DISCOVERY_I2Cx_TIMING
#define DISCOVERY_I2Cx_TIMING ((uint32_t)0x00901954)
#endif /* DISCOVERY_I2Cx_TIMING */
/**
* @}
*/
/**
* @}
*/
/** @defgroup STM32F413H_DISCOVERY_LOW_LEVEL_Exported_Functions STM32F413H DISCOVERY Low Level Exported Functions
* @{
*/
uint32_t BSP_GetVersion(void);
void BSP_LED_Init(Led_TypeDef Led);
void BSP_LED_DeInit(Led_TypeDef Led);
void BSP_LED_On(Led_TypeDef Led);
void BSP_LED_Off(Led_TypeDef Led);
void BSP_LED_Toggle(Led_TypeDef Led);
void BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef ButtonMode);
void BSP_PB_DeInit(Button_TypeDef Button);
uint32_t BSP_PB_GetState(Button_TypeDef Button);
void BSP_COM_Init(COM_TypeDef COM, UART_HandleTypeDef *husart);
void BSP_COM_DeInit(COM_TypeDef COM, UART_HandleTypeDef *huart);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F413H_DISCOVERY_H */
Reference in New Issue View Git Blame Copy Permalink