STM32CubeF4/Drivers/BSP/STM32F401-Discovery/stm32f401_discovery_gyroscope.c

/**
  ******************************************************************************
  * @file    stm32f401_discovery_gyroscope.c
  * @author  MCD Application Team
  * @brief   This file provides a set of functions needed to manage the
  *          MEMS gyroscope available on STM32F401-Discovery Kit.
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2017 STMicroelectronics.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
  */
/* Includes ------------------------------------------------------------------*/
#include "stm32f401_discovery_gyroscope.h"

/** @addtogroup BSP
  * @{
  */ 

/** @addtogroup STM32F401_DISCOVERY
  * @{
  */  
  
/** @defgroup STM32F401_DISCOVERY_GYROSCOPE STM32F401 DISCOVERY GYROSCOPE
  * @{
  */


/** @defgroup STM32F401_DISCOVERY_GYROSCOPE_Private_TypesDefinitions STM32F401 DISCOVERY GYROSCOPE Private TypesDefinitions
  * @{
  */ 
/**
  * @}
  */

/** @defgroup STM32F401_DISCOVERY_GYROSCOPE_Private_Defines STM32F401 DISCOVERY GYROSCOPE Private Defines
  * @{
  */
/**
  * @}
  */

/** @defgroup STM32F401_DISCOVERY_GYROSCOPE_Private_Macros STM32F401 DISCOVERY GYROSCOPE Private Macros
  * @{
  */
/**
  * @}
  */ 
  
/** @defgroup STM32F401_DISCOVERY_GYROSCOPE_Private_Variables STM32F401 DISCOVERY GYROSCOPE Private Variables
  * @{
  */ 
static GYRO_DrvTypeDef *GyroscopeDrv;
/**
  * @}
  */

/** @defgroup STM32F401_DISCOVERY_GYROSCOPE_Private_FunctionPrototypes STM32F401 DISCOVERY GYROSCOPE Private FunctionPrototypes
  * @{
  */
/**
  * @}
  */

/** @defgroup STM32F401_DISCOVERY_GYROSCOPE_Private_Functions STM32F401 DISCOVERY GYROSCOPE Private Functions
  * @{
  */

/**
  * @brief  Set Gyroscope Initialization.
  * @retval GYRO_OK if no problem during initialization
  */
uint8_t BSP_GYRO_Init(void)
{  
  uint8_t ret = GYRO_ERROR;
  uint16_t ctrl = 0x0000;
  GYRO_InitTypeDef         L3GD20_InitStructure;
  GYRO_FilterConfigTypeDef L3GD20_FilterStructure = {0,0};
 
  if((L3gd20Drv.ReadID() == I_AM_L3GD20) || (L3gd20Drv.ReadID() == I_AM_L3GD20_TR))
  {
    /* Initialize the Gyroscope driver structure */
    GyroscopeDrv = &L3gd20Drv;

    /* MEMS configuration ----------------------------------------------------*/
    /* Fill the Gyroscope structure */
    L3GD20_InitStructure.Power_Mode = L3GD20_MODE_ACTIVE;
    L3GD20_InitStructure.Output_DataRate = L3GD20_OUTPUT_DATARATE_1;
    L3GD20_InitStructure.Axes_Enable = L3GD20_AXES_ENABLE;
    L3GD20_InitStructure.Band_Width = L3GD20_BANDWIDTH_4;
    L3GD20_InitStructure.BlockData_Update = L3GD20_BlockDataUpdate_Continous;
    L3GD20_InitStructure.Endianness = L3GD20_BLE_LSB;
    L3GD20_InitStructure.Full_Scale = L3GD20_FULLSCALE_500; 
  
    /* Configure MEMS: data rate, power mode, full scale and axes */
    ctrl = (uint16_t) (L3GD20_InitStructure.Power_Mode | L3GD20_InitStructure.Output_DataRate | \
                      L3GD20_InitStructure.Axes_Enable | L3GD20_InitStructure.Band_Width);
  
    ctrl |= (uint16_t) ((L3GD20_InitStructure.BlockData_Update | L3GD20_InitStructure.Endianness | \
                        L3GD20_InitStructure.Full_Scale) << 8);

    /* Configure the Gyroscope main parameters */
    GyroscopeDrv->Init(ctrl);
  
    L3GD20_FilterStructure.HighPassFilter_Mode_Selection =L3GD20_HPM_NORMAL_MODE_RES;
    L3GD20_FilterStructure.HighPassFilter_CutOff_Frequency = L3GD20_HPFCF_0;
  
    ctrl = (uint8_t) ((L3GD20_FilterStructure.HighPassFilter_Mode_Selection |\
                       L3GD20_FilterStructure.HighPassFilter_CutOff_Frequency));    
  
    /* Configure the Gyroscope main parameters */
    GyroscopeDrv->FilterConfig(ctrl) ;
  
    GyroscopeDrv->FilterCmd(L3GD20_HIGHPASSFILTER_ENABLE);
  
    ret = GYRO_OK;
  }
  return ret;
}

/**
  * @brief  Read ID of Gyroscope component.
  * @retval ID
  */
uint8_t BSP_GYRO_ReadID(void)
{
  uint8_t id = 0x00;
  
  if(GyroscopeDrv->ReadID != NULL)
  {
    id = GyroscopeDrv->ReadID();
  }  
  return id;
}

/**
  * @brief  Reboot memory content of Gyroscope.
  */
void BSP_GYRO_Reset(void)
{  
  if(GyroscopeDrv->Reset != NULL)
  {
    GyroscopeDrv->Reset();
  }  
}

/**
  * @brief  Configures INT1 interrupt.
  * @param  pIntConfig: pointer to a L3GD20_InterruptConfig_TypeDef 
  *         structure that contains the configuration setting for the L3GD20 Interrupt.
  */
void BSP_GYRO_ITConfig(GYRO_InterruptConfigTypeDef *pIntConfig)
{
  uint16_t interruptconfig = 0x0000;
  
  if(GyroscopeDrv->ConfigIT != NULL)
  {
    /* Configure latch Interrupt request and axe interrupts */                   
    interruptconfig |= ((uint8_t)(pIntConfig->Latch_Request| \
                                  pIntConfig->Interrupt_Axes) << 8);
    
    interruptconfig |= (uint8_t)(pIntConfig->Interrupt_ActiveEdge);
    
    GyroscopeDrv->ConfigIT(interruptconfig);
  }  
}

/**
  * @brief  Enables INT1 or INT2 interrupt.
  * @param  IntPin: Interrupt pin 
  *      This parameter can be: 
  *        @arg L3GD20_INT1
  *        @arg L3GD20_INT2
  */
void BSP_GYRO_EnableIT(uint8_t IntPin)
{
  if(GyroscopeDrv->EnableIT != NULL)
  {
    GyroscopeDrv->EnableIT(IntPin);
  }
}

/**
  * @brief  Disables INT1 or INT2 interrupt.
  * @param  IntPin: Interrupt pin 
  *      This parameter can be: 
  *        @arg L3GD20_INT1
  *        @arg L3GD20_INT2
  */
void BSP_GYRO_DisableIT(uint8_t IntPin)
{
  if(GyroscopeDrv->DisableIT != NULL)
  {
    GyroscopeDrv->DisableIT(IntPin);
  }
}
  
/**
  * @brief  Get XYZ angular acceleration.
  * @param  pfData: pointer on floating array         
  */
void BSP_GYRO_GetXYZ(float *pfData)
{
  if(GyroscopeDrv->GetXYZ!= NULL)
  {   
    GyroscopeDrv->GetXYZ(pfData);
  }
}

/**
  * @}
  */ 

/**
  * @}
  */ 
  
/**
  * @}
  */ 

/**
  * @}
  */