OrgST-Microelectronics/STM32CubeF4
1
0
Fork 0
mirror of https://github.com/STMicroelectronics/STM32CubeF4.git synced 2025-05-01 22:17:30 +08:00
Code Issues Releases Wiki Activity
STM32CubeF4/Drivers/BSP/STM32F401-Discovery/stm32f401_discovery.h
rihab kouki 3d6be4bd40 Release v1.27.0
2022-03-09 10:37:11 +01:00

293 lines
11 KiB
C
Raw Blame History

/**
******************************************************************************
* @file stm32f401_discovery.h
* @author MCD Application Team
* @brief This file contains definitions for STM32F401-Discovery Kit's Leds and
* push-button hardware resources.
******************************************************************************
* @attention
*
* Copyright (c) 2017 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F401_DISCOVERY_H
#define __STM32F401_DISCOVERY_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
/** @addtogroup BSP
* @{
*/
/** @addtogroup STM32F401_DISCOVERY
* @{
*/
/** @addtogroup STM32F401_DISCOVERY_LOW_LEVEL
* @{
*/
/** @defgroup STM32F401_DISCOVERY_LOW_LEVEL_Exported_Types STM32F401 DISCOVERY LOW LEVEL Exported Types
* @{
*/
typedef enum
{
LED4 = 0,
LED3 = 1,
LED5 = 2,
LED6 = 3
}Led_TypeDef;
typedef enum
{
BUTTON_KEY = 0,
}Button_TypeDef;
typedef enum
{
BUTTON_MODE_GPIO = 0,
BUTTON_MODE_EXTI = 1
}ButtonMode_TypeDef;
/**
* @}
*/
/** @defgroup STM32F401_DISCOVERY_LOW_LEVEL_Exported_Constants STM32F401 DISCOVERY LOW LEVEL Exported Constants
* @{
*/
/**
* @brief Define for STM32F401_DISCOVERY board
*/
#if !defined (USE_STM32F401_DISCO)
#define USE_STM32F401_DISCO
#endif
/** @defgroup STM32F401_DISCOVERY_LOW_LEVEL_LED STM32F401 DISCOVERY LOW LEVEL LED
* @{
*/
#define LEDn 4
#define LED4_PIN GPIO_PIN_12
#define LED4_GPIO_PORT GPIOD
#define LED4_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE()
#define LED4_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE()
#define LED3_PIN GPIO_PIN_13
#define LED3_GPIO_PORT GPIOD
#define LED3_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE()
#define LED3_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE()
#define LED5_PIN GPIO_PIN_14
#define LED5_GPIO_PORT GPIOD
#define LED5_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE()
#define LED5_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE()
#define LED6_PIN GPIO_PIN_15
#define LED6_GPIO_PORT GPIOD
#define LED6_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE()
#define LED6_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE()
#define LEDx_GPIO_CLK_ENABLE(__INDEX__) do{if((__INDEX__) == 0) LED4_GPIO_CLK_ENABLE(); else \
if((__INDEX__) == 1) LED3_GPIO_CLK_ENABLE(); else \
if((__INDEX__) == 2) LED5_GPIO_CLK_ENABLE(); else \
if((__INDEX__) == 3) LED6_GPIO_CLK_ENABLE(); \
}while(0)
#define LEDx_GPIO_CLK_DISABLE(__INDEX__) do{if((__INDEX__) == 0) LED4_GPIO_CLK_DISABLE(); else \
if((__INDEX__) == 1) LED3_GPIO_CLK_DISABLE(); else \
if((__INDEX__) == 2) LED5_GPIO_CLK_DISABLE(); else \
if((__INDEX__) == 3) LED6_GPIO_CLK_DISABLE(); \
}while(0)
/**
* @}
*/
/** @defgroup STM32F401_DISCOVERY_LOW_LEVEL_BUTTON STM32F401 DISCOVERY LOW LEVEL BUTTON
* @{
*/
#define BUTTONn 1
/**
* @brief Wakeup push-button
*/
#define KEY_BUTTON_PIN GPIO_PIN_0
#define KEY_BUTTON_GPIO_PORT GPIOA
#define KEY_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
#define KEY_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
#define KEY_BUTTON_EXTI_IRQn EXTI0_IRQn
#define BUTTONx_GPIO_CLK_ENABLE(__INDEX__) do{if((__INDEX__) == 0) KEY_BUTTON_GPIO_CLK_ENABLE(); \
}while(0)
#define BUTTONx_GPIO_CLK_DISABLE(__INDEX__) do{if((__INDEX__) == 0) KEY_BUTTON_GPIO_CLK_DISABLE(); \
}while(0)
/**
* @}
*/
/** @defgroup STM32F401_DISCOVERY_LOW_LEVEL_BUS STM32F401 DISCOVERY LOW LEVEL BUS
* @{
*/
/*############################### I2Cx #######################################*/
#define DISCOVERY_I2Cx I2C1
#define DISCOVERY_I2Cx_CLOCK_ENABLE() __HAL_RCC_I2C1_CLK_ENABLE()
#define DISCOVERY_I2Cx_GPIO_PORT GPIOB /* GPIOB */
#define DISCOVERY_I2Cx_SCL_PIN GPIO_PIN_6 /* PB.06 */
#define DISCOVERY_I2Cx_SDA_PIN GPIO_PIN_9 /* PB.09 */
#define DISCOVERY_I2Cx_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
#define DISCOVERY_I2Cx_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
#define DISCOVERY_I2Cx_AF GPIO_AF4_I2C1
#define DISCOVERY_I2Cx_FORCE_RESET() __HAL_RCC_I2C1_FORCE_RESET()
#define DISCOVERY_I2Cx_RELEASE_RESET() __HAL_RCC_I2C1_RELEASE_RESET()
/* I2C interrupt requests */
#define DISCOVERY_I2Cx_EV_IRQn I2C1_EV_IRQn
#define DISCOVERY_I2Cx_ER_IRQn I2C1_ER_IRQn
/* I2C speed and timeout max */
#define I2Cx_TIMEOUT_MAX 0xA000 /*<! The value of the maximal timeout for I2C waiting loops */
#define I2Cx_MAX_COMMUNICATION_FREQ ((uint32_t) 100000)
/*################################# SPI1 #####################################*/
#define DISCOVERY_SPIx SPI1
#define DISCOVERY_SPIx_CLOCK_ENABLE() __HAL_RCC_SPI1_CLK_ENABLE()
#define DISCOVERY_SPIx_GPIO_PORT GPIOA /* GPIOA */
#define DISCOVERY_SPIx_AF GPIO_AF5_SPI1
#define DISCOVERY_SPIx_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
#define DISCOVERY_SPIx_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
#define DISCOVERY_SPIx_SCK_PIN GPIO_PIN_5 /* PA.05 */
#define DISCOVERY_SPIx_MISO_PIN GPIO_PIN_6 /* PA.06 */
#define DISCOVERY_SPIx_MOSI_PIN GPIO_PIN_7 /* PA.07 */
/* Maximum Timeout values for flags waiting loops. These timeouts are not based
on accurate values, they just guarantee that the application will not remain
stuck if the SPI communication is corrupted.
You may modify these timeout values depending on CPU frequency and application
conditions (interrupts routines ...). */
#define SPIx_TIMEOUT_MAX ((uint32_t)0x1000)
/*################################ GYROSCOPE #################################*/
/* Read/Write command */
#define READWRITE_CMD ((uint8_t)0x80)
/* Multiple byte read/write command */
#define MULTIPLEBYTE_CMD ((uint8_t)0x40)
/* Dummy Byte Send by the SPI Master device in order to generate the Clock to the Slave device */
#define DUMMY_BYTE ((uint8_t)0x00)
/* Chip Select macro definition */
#define GYRO_CS_LOW() HAL_GPIO_WritePin(GYRO_CS_GPIO_PORT, GYRO_CS_PIN, GPIO_PIN_RESET)
#define GYRO_CS_HIGH() HAL_GPIO_WritePin(GYRO_CS_GPIO_PORT, GYRO_CS_PIN, GPIO_PIN_SET)
/**
* @brief GYRO SPI Interface pins
*/
#define GYRO_CS_GPIO_PORT GPIOE /* GPIOE */
#define GYRO_CS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE()
#define GYRO_CS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE()
#define GYRO_CS_PIN GPIO_PIN_3 /* PE.03 */
#define GYRO_INT_GPIO_PORT GPIOE /* GPIOE */
#define GYRO_INT_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE()
#define GYRO_INT_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE()
#define GYRO_INT1_PIN GPIO_PIN_0 /* PE.00 */
#define GYRO_INT1_EXTI_IRQn EXTI0_IRQn
#define GYRO_INT2_PIN GPIO_PIN_1 /* PE.01 */
#define GYRO_INT2_EXTI_IRQn EXTI1_IRQn
/*################################### AUDIO ##################################*/
/**
* @brief AUDIO I2C Interface pins
*/
/* Device I2C address */
#define AUDIO_I2C_ADDRESS 0x94
/* Audio codec power on/off macro definition */
#define CODEC_AUDIO_POWER_OFF() HAL_GPIO_WritePin(AUDIO_RESET_GPIO, AUDIO_RESET_PIN, GPIO_PIN_RESET)
#define CODEC_AUDIO_POWER_ON() HAL_GPIO_WritePin(AUDIO_RESET_GPIO, AUDIO_RESET_PIN, GPIO_PIN_SET)
/* Audio Reset Pin definition */
#define AUDIO_RESET_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE()
#define AUDIO_RESET_PIN GPIO_PIN_4
#define AUDIO_RESET_GPIO GPIOD
/**
* @}
*/
/*############################### ACCELEROMETER ##############################*/
/**
* @brief ACCELERO I2C1 Interface pins
*/
#define ACCELERO_DRDY_GPIO_PORT GPIOE /* GPIOE */
#define ACCELERO_DRDY_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE()
#define ACCELERO_DRDY_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE()
#define ACCELERO_DRDY_PIN GPIO_PIN_2 /* PE.02 */
#define ACCELERO_DRDY_EXTI_IRQn TAMP_STAMP_IRQn
#define ACCELERO_INT_GPIO_PORT GPIOE /* GPIOE */
#define ACCELERO_INT_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE()
#define ACCELERO_INT_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE()
#define ACCELERO_INT1_PIN GPIO_PIN_4 /* PE.04 */
#define ACCELERO_INT1_EXTI_IRQn EXTI4_IRQn
#define ACCELERO_INT2_PIN GPIO_PIN_5 /* PE.05 */
#define ACCELERO_INT2_EXTI_IRQn EXTI9_5_IRQn
/**
* @}
*/
/** @defgroup STM32F401_DISCOVERY_LOW_LEVEL_Exported_Macros STM32F401 DISCOVERY LOW LEVEL Exported Macros
* @{
*/
/**
* @}
*/
/** @defgroup STM32F401_DISCOVERY_LOW_LEVEL_Exported_Functions STM32F401 DISCOVERY LOW LEVEL Exported Functions
* @{
*/
uint32_t BSP_GetVersion(void);
void BSP_LED_Init(Led_TypeDef Led);
void BSP_LED_On(Led_TypeDef Led);
void BSP_LED_Off(Led_TypeDef Led);
void BSP_LED_Toggle(Led_TypeDef Led);
void BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef ButtonMode);
uint32_t BSP_PB_GetState(Button_TypeDef Button);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F401_DISCOVERY_H */
Reference in New Issue View Git Blame Copy Permalink