mirror of
https://github.com/STMicroelectronics/STM32CubeF4.git
synced 2025-05-11 19:29:45 +08:00
98 lines
4.8 KiB
Plaintext
98 lines
4.8 KiB
Plaintext
/**
|
|
@page DCMI_SnapshotMode DCMI Snapshot Mode example
|
|
|
|
@verbatim
|
|
******************** (C) COPYRIGHT 2017 STMicroelectronics *******************
|
|
* @file DCMI/DCMI_SnapshotMode/readme.txt
|
|
* @author MCD Application Team
|
|
* @brief Description of the DCMI Snapshot Mode example.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT 2017 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
@endverbatim
|
|
|
|
@par Example Description
|
|
|
|
This example provides a short description of how to use the DCMI to interface with
|
|
camera module and display in snapshot mode the picture on LCD.
|
|
|
|
At the beginning of the main program the HAL_Init() function is called to reset
|
|
all the peripherals, initialize the Flash interface and the systick.
|
|
Then the SystemClock_Config() function is used to configure the system
|
|
clock (SYSCLK) to run at 180 MHz.
|
|
|
|
The Digital camera interface is configured to receive the capture from
|
|
the camera module mounted on STM324x9I-EVAL RevB evaluation board.
|
|
DMA2 Stream1 channel1 is configured to transfer the picture from DCMI peripheral
|
|
to an external RAM used by the LCD as a frame buffer.
|
|
|
|
The camera module is configured to generate (480x272) image resolution
|
|
and the LCD is configured to display (480x272) image resolution
|
|
|
|
@note Care must be taken when using HAL_Delay(), this function provides accurate delay (in milliseconds)
|
|
based on variable incremented in SysTick ISR. This implies that if HAL_Delay() is called from
|
|
a peripheral ISR process, then the SysTick interrupt must have higher priority (numerically lower)
|
|
than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
|
|
To change the SysTick interrupt priority you have to use HAL_NVIC_SetPriority() function.
|
|
|
|
@note The application needs to ensure that the SysTick time base is always set to 1 millisecond
|
|
to have correct HAL operation.
|
|
|
|
@par Keywords
|
|
|
|
Display, DCMI, Camera, Snapshot, Frame Buffer, LCD, ARGB8888, DMA, RGB565, SDRAM, DMA2D, QQVGA
|
|
|
|
@par Directory contents
|
|
|
|
- DCMI/DCMI_SnapshotMode/Inc/stm32f4xx_hal_conf.h HAL configuration file
|
|
- DCMI/DCMI_SnapshotMode/Inc/main.h Main program header file
|
|
- DCMI/DCMI_SnapshotMode/Inc/stm32f4xx_it.h Interrupt handlers header file
|
|
- DCMI/DCMI_SnapshotMode/Src/main.c Main program
|
|
- DCMI/DCMI_SnapshotMode/Src/stm32f4xx_it.c Interrupt handlers
|
|
- DCMI/DCMI_SnapshotMode/Src/system_stm32f4xx.c STM32F4xx system clock configuration file
|
|
|
|
|
|
@par Hardware and Software environment
|
|
|
|
- This example runs on STM32F429xx/STM32F439xx devices.
|
|
|
|
- This example has been tested with STMicroelectronics STM324x9I-EVAL RevB
|
|
evaluation boards, which includes the AMPIRE480272 LCD and OV2640 camera module,
|
|
and can be easily tailored to any other supported device and development board.
|
|
|
|
|
|
@par How to use it ?
|
|
|
|
In order to make the program work, you must do the following :
|
|
- Open your preferred toolchain
|
|
- Rebuild all files and load your image into target memory
|
|
- Run the example
|
|
|
|
* <h3><center>© COPYRIGHT STMicroelectronics</center></h3>
|
|
*/
|
|
|