mirror of
https://github.com/STMicroelectronics/STM32CubeF4.git
synced 2025-04-28 13:48:54 +08:00
252 lines
8.7 KiB
C
252 lines
8.7 KiB
C
/**
|
|
******************************************************************************
|
|
* @file UART/UART_Printf/Src/main.c
|
|
* @author MCD Application Team
|
|
* @brief This example shows how to retarget the C library printf function
|
|
* to the UART.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "main.h"
|
|
|
|
/** @addtogroup STM32F4xx_HAL_Examples
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup UART_Printf
|
|
* @{
|
|
*/
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* UART handler declaration */
|
|
UART_HandleTypeDef UartHandle;
|
|
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
#ifdef __GNUC__
|
|
/* With GCC, small printf (option LD Linker->Libraries->Small printf
|
|
set to 'Yes') calls __io_putchar() */
|
|
#define PUTCHAR_PROTOTYPE int __io_putchar(int ch)
|
|
#else
|
|
#define PUTCHAR_PROTOTYPE int fputc(int ch, FILE *f)
|
|
#endif /* __GNUC__ */
|
|
static void SystemClock_Config(void);
|
|
static void Error_Handler(void);
|
|
|
|
/* Private functions ---------------------------------------------------------*/
|
|
|
|
/**
|
|
* @brief Main program
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
int main(void)
|
|
{
|
|
|
|
/* STM32F4xx HAL library initialization:
|
|
- Configure the Flash prefetch
|
|
- Systick timer is configured by default as source of time base, but user
|
|
can eventually implement his proper time base source (a general purpose
|
|
timer for example or other time source), keeping in mind that Time base
|
|
duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
|
|
handled in milliseconds basis.
|
|
- Set NVIC Group Priority to 4
|
|
- Low Level Initialization
|
|
*/
|
|
HAL_Init();
|
|
|
|
/* Configure the system clock to 100 MHz */
|
|
SystemClock_Config();
|
|
|
|
/* Initialize BSP Led for LED4 */
|
|
BSP_LED_Init(LED4);
|
|
|
|
/*##-1- Configure the UART peripheral ######################################*/
|
|
/* Put the USART peripheral in the Asynchronous mode (UART Mode) */
|
|
/* UART configured as follows:
|
|
- Word Length = 8 Bits (7 data bit + 1 parity bit) :
|
|
BE CAREFUL : Program 7 data bits + 1 parity bit in PC HyperTerminal
|
|
- Stop Bit = One Stop bit
|
|
- Parity = ODD parity
|
|
- BaudRate = 9600 baud
|
|
- Hardware flow control disabled (RTS and CTS signals) */
|
|
UartHandle.Instance = USARTx;
|
|
|
|
UartHandle.Init.BaudRate = 9600;
|
|
UartHandle.Init.WordLength = UART_WORDLENGTH_8B;
|
|
UartHandle.Init.StopBits = UART_STOPBITS_1;
|
|
UartHandle.Init.Parity = UART_PARITY_ODD;
|
|
UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
|
UartHandle.Init.Mode = UART_MODE_TX_RX;
|
|
UartHandle.Init.OverSampling = UART_OVERSAMPLING_16;
|
|
if (HAL_UART_Init(&UartHandle) != HAL_OK)
|
|
{
|
|
/* Initialization Error */
|
|
Error_Handler();
|
|
}
|
|
|
|
/* Output a message on Hyperterminal using printf function */
|
|
printf("\n\r UART Printf Example: retarget the C library printf function to the UART\n\r");
|
|
printf("** Test finished successfully. ** \n\r");
|
|
|
|
/* Infinite loop */
|
|
while (1)
|
|
{
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Retargets the C library printf function to the USART.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
PUTCHAR_PROTOTYPE
|
|
{
|
|
/* Place your implementation of fputc here */
|
|
/* e.g. write a character to the USART6 and Loop until the end of transmission */
|
|
HAL_UART_Transmit(&UartHandle, (uint8_t *)&ch, 1, 0xFFFF);
|
|
|
|
return ch;
|
|
}
|
|
|
|
/**
|
|
* @brief System Clock Configuration
|
|
* The system Clock is configured as follow :
|
|
* System Clock source = PLL (HSE)
|
|
* SYSCLK(Hz) = 100000000
|
|
* HCLK(Hz) = 100000000
|
|
* AHB Prescaler = 1
|
|
* APB1 Prescaler = 2
|
|
* APB2 Prescaler = 1
|
|
* HSE Frequency(Hz) = 8000000
|
|
* PLL_M = 8
|
|
* PLL_N = 200
|
|
* PLL_P = 2
|
|
* PLL_Q = 7
|
|
* PLL_R = 2
|
|
* VDD(V) = 3.3
|
|
* Main regulator output voltage = Scale1 mode
|
|
* Flash Latency(WS) = 3
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SystemClock_Config(void)
|
|
{
|
|
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
|
RCC_OscInitTypeDef RCC_OscInitStruct;
|
|
HAL_StatusTypeDef ret = HAL_OK;
|
|
|
|
/* Enable Power Control clock */
|
|
__HAL_RCC_PWR_CLK_ENABLE();
|
|
|
|
/* The voltage scaling allows optimizing the power consumption when the device is
|
|
clocked below the maximum system frequency, to update the voltage scaling value
|
|
regarding system frequency refer to product datasheet. */
|
|
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
|
|
|
/* Enable HSE Oscillator and activate PLL with HSE as source */
|
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
|
RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS;
|
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
|
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
|
RCC_OscInitStruct.PLL.PLLM = 8;
|
|
RCC_OscInitStruct.PLL.PLLN = 200;
|
|
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
|
|
RCC_OscInitStruct.PLL.PLLQ = 7;
|
|
RCC_OscInitStruct.PLL.PLLR = 2;
|
|
ret = HAL_RCC_OscConfig(&RCC_OscInitStruct);
|
|
|
|
if(ret != HAL_OK)
|
|
{
|
|
while(1) { ; }
|
|
}
|
|
|
|
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2
|
|
clocks dividers */
|
|
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
|
|
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
|
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
|
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
|
|
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
|
ret = HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3);
|
|
if(ret != HAL_OK)
|
|
{
|
|
while(1) { ; }
|
|
}
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief This function is executed in case of error occurrence.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void Error_Handler(void)
|
|
{
|
|
/* Turn LED4 on */
|
|
BSP_LED_On(LED4);
|
|
while (1)
|
|
{
|
|
}
|
|
}
|
|
|
|
#ifdef USE_FULL_ASSERT
|
|
/**
|
|
* @brief Reports the name of the source file and the source line number
|
|
* where the assert_param error has occurred.
|
|
* @param file: pointer to the source file name
|
|
* @param line: assert_param error line source number
|
|
* @retval None
|
|
*/
|
|
void assert_failed(uint8_t *file, uint32_t line)
|
|
{
|
|
/* User can add his own implementation to report the file name and line number,
|
|
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
|
|
|
/* Infinite loop */
|
|
while (1)
|
|
{
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|