OrgST-Microelectronics/STM32CubeF4
1
0
Fork 0
mirror of https://github.com/STMicroelectronics/STM32CubeF4.git synced 2025-05-03 22:17:07 +08:00
Code Issues Releases Wiki Activity
STM32CubeF4/Projects/STM32F413H-Discovery/Examples/BSP/Src/main.c
Ali Labbene b5abca20c9 Release v1.24.1
2019-08-05 13:05:39 +01:00

327 lines
10 KiB
C
Raw Blame History

/**
******************************************************************************
* @file BSP/Src/main.c
* @author MCD Application Team
* @brief This example code shows how to use the STM32412G_DISCOVERY BSP Drivers
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "main.h"
#include "stlogo.h"
/** @addtogroup STM32F4xx_HAL_Examples
* @{
*/
/** @addtogroup BSP
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
uint8_t DemoIndex = 0;
uint8_t NbLoop = 1;
uint32_t SdmmcTest = 0;
/* Global variables ----------------------------------------------------------*/
uint8_t SDDetectIT = 0;
/* Global extern variables ---------------------------------------------------*/
#ifndef USE_FULL_ASSERT
uint16_t ErrorCounter = 0;
#endif
/* Private function prototypes -----------------------------------------------*/
static void SystemClock_Config(void);
static void Display_DemoDescription(void);
BSP_DemoTypedef BSP_examples[]=
{
{LCD_demo, "LCD", 0},
{Touchscreen_demo1, "TS demo 1", 0},
{Touchscreen_demo2, "TS demo 2", 0},
{Touchscreen_demo3, "TS Interrupt demo", 0},
{SD_demo, "mSD", 0},
{SD_DMA_demo, "mSD in DMA Mode", 0},
{SD_exti_demo, "mSD exti detect", 0},
{Log_demo, "LCD LOG", 0},
{QSPI_demo, "QSPI", 0},
{PSRAM_demo, "PSRAM", 0},
{PSRAM_DMA_demo, "PSRAM DMA", 0},
{AudioPlay_demo, "Audio Play", 0},
{AudioRecDfsdm_demo, "DFSDM Rec/Play", 0},
};
/* Private functions ---------------------------------------------------------*/
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
/* STM32F4xx HAL library initialization:
- Configure the Flash prefetch, instruction and Data caches
- Configure the Systick to generate an interrupt each 1 msec
- Set NVIC Group Priority to 4
- Global MSP (MCU Support Package) initialization
*/
HAL_Init();
/* Configure the system clock to 100 Mhz */
SystemClock_Config();
BSP_LED_Init(LED3);
BSP_LED_Init(LED4);
BSP_LED_On(LED3);
/* Configure the User Button in GPIO Mode */
BSP_PB_Init(BUTTON_WAKEUP, BUTTON_MODE_GPIO);
/*##-1- Initialize the LCD #################################################*/
/* Initialize the LCD */
BSP_LCD_Init();
Display_DemoDescription();
/* Wait For User inputs */
while (1)
{
if(BSP_PB_GetState(BUTTON_WAKEUP) != GPIO_PIN_RESET)
{
while (BSP_PB_GetState(BUTTON_WAKEUP) != GPIO_PIN_RESET); /* Wait for button released */
BSP_examples[DemoIndex++].DemoFunc();
if(DemoIndex >= COUNT_OF_EXAMPLE(BSP_examples))
{
/* Increment number of loops which be used by EEPROM example */
NbLoop++;
DemoIndex = 0;
}
Display_DemoDescription();
}
}
}
/**
* @brief This function is executed in case of error occurrence.
* @param None
* @retval None
*/
static void Error_Handler(void)
{
BSP_LED_Off(LED3);
BSP_LED_On(LED4);
while(1)
{
}
}
/**
* @brief System Clock Configuration
* The system Clock is configured as follow :
* System Clock source = PLL (HSE)
* SYSCLK(Hz) = 100000000
* HCLK(Hz) = 100000000
* AHB Prescaler = 1
* APB1 Prescaler = 2
* APB2 Prescaler = 1
* HSE Frequency(Hz) = 8000000
* PLL_M = 8
* PLL_N = 200
* PLL_P = 2
* PLL_Q = 7
* PLL_R = 2
* VDD(V) = 3.3
* Main regulator output voltage = Scale1 mode
* Flash Latency(WS) = 3
* @param None
* @retval None
*/
static void SystemClock_Config(void)
{
RCC_ClkInitTypeDef RCC_ClkInitStruct;
RCC_OscInitTypeDef RCC_OscInitStruct;
HAL_StatusTypeDef ret = HAL_OK;
/* Enable Power Control clock */
__HAL_RCC_PWR_CLK_ENABLE();
/* The voltage scaling allows optimizing the power consumption when the device is
clocked below the maximum system frequency, to update the voltage scaling value
regarding system frequency refer to product datasheet. */
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
/* Enable HSE Oscillator and activate PLL with HSE as source */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
RCC_OscInitStruct.PLL.PLLM = 8;
RCC_OscInitStruct.PLL.PLLN = 200;
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
RCC_OscInitStruct.PLL.PLLQ = 7;
RCC_OscInitStruct.PLL.PLLR = 2;
ret = HAL_RCC_OscConfig(&RCC_OscInitStruct);
if(ret != HAL_OK)
{
Error_Handler();
}
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2
clocks dividers */
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
ret = HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3);
if(ret != HAL_OK)
{
Error_Handler();
}
}
/**
* @brief Display main demo messages.
* @param None
* @retval None
*/
static void Display_DemoDescription(void)
{
uint8_t desc[50];
BSP_LCD_SetFont(&LCD_DEFAULT_FONT);
/* Clear the LCD */
BSP_LCD_SetBackColor(LCD_COLOR_WHITE);
BSP_LCD_Clear(LCD_COLOR_WHITE);
/* Set the LCD Text Color */
BSP_LCD_SetTextColor(LCD_COLOR_DARKBLUE);
/* Display LCD messages */
BSP_LCD_DisplayStringAt(0, 2, (uint8_t *)"STM32F413H BSP", CENTER_MODE);
BSP_LCD_DisplayStringAt(0, 14, (uint8_t *)"Drivers examples", CENTER_MODE);
/* Draw Bitmap */
BSP_LCD_DrawBitmap((BSP_LCD_GetXSize() - 80)/2, 30, (uint8_t *)stlogo);
BSP_LCD_SetFont(&Font12);
BSP_LCD_DisplayStringAt(0, BSP_LCD_GetYSize()-12, (uint8_t *)"STMicroelectronics 2017", CENTER_MODE);
BSP_LCD_SetFont(&Font12);
BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
BSP_LCD_FillRect(0, BSP_LCD_GetYSize()/2 + 1, BSP_LCD_GetXSize(), 60);
BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
BSP_LCD_SetBackColor(LCD_COLOR_BLUE);
BSP_LCD_DisplayStringAt(0, BSP_LCD_GetYSize()/2 + 20, (uint8_t *)"Press button to start :", CENTER_MODE);
sprintf((char *)desc,"%s example", BSP_examples[DemoIndex].DemoName);
BSP_LCD_DisplayStringAt(0, BSP_LCD_GetYSize()/2 + 35, (uint8_t *)desc, CENTER_MODE);
}
/**
* @brief Check for user input.
* @param None
* @retval Input state (1 : active / 0 : Inactive)
*/
uint8_t CheckForUserInput(void)
{
if(BSP_PB_GetState(BUTTON_WAKEUP) != GPIO_PIN_RESET)
{
while (BSP_PB_GetState(BUTTON_WAKEUP) != GPIO_PIN_RESET);
return 1 ;
}
return 0;
}
/**
* @brief EXTI line detection callbacks.
* @param GPIO_Pin: Specifies the pins connected EXTI line
* @retval None
*/
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
{
static uint32_t debounce_time = 0;
if(GPIO_Pin == BUTTON_WAKEUP)
{
/* Prevent debounce effect for user key */
if((HAL_GetTick() - debounce_time) > 50)
{
debounce_time = HAL_GetTick();
}
}
else if(GPIO_Pin == SD_DETECT_PIN)
{
/* SDDetectIT global variable set to notice SD_exti_demo changing state on SD_DETECT_PIN */
SDDetectIT = 1;
}
}
#ifdef USE_FULL_ASSERT
/**
* @brief Reports the name of the source file and the source line number
* where the assert_param error has occurred.
* @param file: pointer to the source file name
* @param line: assert_param error line source number
* @retval None
*/
void assert_failed(uint8_t* file, uint32_t line)
{
/* User can add his own implementation to report the file name and line number,
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
/* Infinite loop */
while (1)
{
}
}
#endif /* USE_FULL_ASSERT */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
Reference in New Issue View Git Blame Copy Permalink