mirror of
https://github.com/STMicroelectronics/STM32CubeF4.git
synced 2025-05-02 22:17:06 +08:00
327 lines
9.7 KiB
C
327 lines
9.7 KiB
C
/**
|
|
******************************************************************************
|
|
* @file PWR/PWR_CurrentConsumption/Src/main.c
|
|
* @author MCD Application Team
|
|
* @brief This example shows how to use STM32F4xx PWR HAL API to enter
|
|
* and exit the stop mode.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "main.h"
|
|
|
|
/** @addtogroup STM32F4xx_HAL_Examples
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup PWR_CurrentConsumption
|
|
* @{
|
|
*/
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
__IO uint32_t uwCounter = 0;
|
|
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
static void SystemClock_Config(void);
|
|
|
|
/* Private functions ---------------------------------------------------------*/
|
|
|
|
/**
|
|
* @brief Main program
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
int main(void)
|
|
{
|
|
/* STM32F4xx HAL library initialization:
|
|
- Configure the Flash prefetch, instruction and Data caches
|
|
- Configure the Systick to generate an interrupt each 1 msec
|
|
- Set NVIC Group Priority to 4
|
|
- Global MSP (MCU Support Package) initialization
|
|
*/
|
|
HAL_Init();
|
|
|
|
/* Configure the system clock to 100 MHz */
|
|
SystemClock_Config();
|
|
|
|
/* Configure LED1 and LED2 */
|
|
BSP_LED_Init(LED1);
|
|
BSP_LED_Init(LED2);
|
|
|
|
/* Enable Power Clock */
|
|
__HAL_RCC_PWR_CLK_ENABLE();
|
|
|
|
/* Check and handle if the system was resumed from Standby mode */
|
|
if(__HAL_PWR_GET_FLAG(PWR_FLAG_SB) != RESET)
|
|
{
|
|
__HAL_PWR_CLEAR_FLAG(PWR_FLAG_SB);
|
|
|
|
/* Infinite loop */
|
|
while (1)
|
|
{
|
|
/* Toggle LED1 */
|
|
BSP_LED_Toggle(LED1);
|
|
|
|
/* Insert a 100ms delay */
|
|
HAL_Delay(100);
|
|
}
|
|
}
|
|
|
|
/* Configure USER Button */
|
|
BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_GPIO);
|
|
|
|
/* Wait until USER button is pressed to enter the Low Power mode */
|
|
while(BSP_PB_GetState(BUTTON_KEY) == RESET)
|
|
{
|
|
/* Toggle LED1 */
|
|
BSP_LED_Toggle(LED1);
|
|
|
|
/* Insert 1s Delay */
|
|
HAL_Delay(1000);
|
|
}
|
|
/* Loop while USER Button is maintained pressed */
|
|
while(BSP_PB_GetState(BUTTON_KEY) != RESET)
|
|
{
|
|
}
|
|
|
|
#if defined (SLEEP_MODE)
|
|
/* Sleep Mode Entry
|
|
- System Running at PLL (100MHz)
|
|
- Flash 5 wait state
|
|
- Instruction and Data caches ON
|
|
- Prefetch ON
|
|
- Code running from Internal FLASH
|
|
- All peripherals disabled.
|
|
- Wake-up using EXTI Line (User Button)
|
|
*/
|
|
SleepMode_Measure();
|
|
#elif defined (STOP_MODE)
|
|
/* STOP Mode Entry
|
|
- RTC Clocked by LSI
|
|
- Regulator in LP mode
|
|
- HSI, HSE OFF and LSI OFF if not used as RTC Clock source
|
|
- No IWDG
|
|
- FLASH in deep power down mode
|
|
- Automatic Wake-up using RTC clocked by LSI (after ~20s)
|
|
*/
|
|
StopMode_Measure();
|
|
#elif defined (STANDBY_MODE)
|
|
/* STANDBY Mode Entry
|
|
- Backup SRAM and RTC OFF
|
|
- IWDG and LSI OFF
|
|
- Wake-up using WakeUp Pin (PA.00)
|
|
*/
|
|
StandbyMode_Measure();
|
|
|
|
#elif defined (STANDBY_RTC_MODE)
|
|
/* STANDBY Mode with RTC on LSI Entry
|
|
- RTC Clocked by LSI
|
|
- IWDG OFF and LSI OFF if not used as RTC Clock source
|
|
- Backup SRAM OFF
|
|
- Automatic Wake-up using RTC clocked by LSI (after ~20s)
|
|
*/
|
|
StandbyRTCMode_Measure();
|
|
|
|
#elif defined (STANDBY_RTC_BKPSRAM_MODE)
|
|
/* STANDBY Mode with RTC on LSI Entry
|
|
- RTC Clocked by LSI
|
|
- Backup SRAM ON
|
|
- IWDG OFF
|
|
- Automatic Wake-up using RTC clocked by LSI (after ~20s)
|
|
*/
|
|
StandbyRTCBKPSRAMMode_Measure();
|
|
#endif
|
|
|
|
if(uwCounter != 0)
|
|
{
|
|
BSP_LED_Init(LED1);
|
|
}
|
|
|
|
/* Infinite loop */
|
|
while (1)
|
|
{
|
|
/* Toggle LED1 */
|
|
BSP_LED_Toggle(LED1);
|
|
|
|
/* Inserted Delay */
|
|
HAL_Delay(100);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief System Clock Configuration
|
|
* The system Clock is configured as follows:
|
|
* System Clock source = PLL (HSE)
|
|
* SYSCLK(Hz) = 100000000
|
|
* HCLK(Hz) = 100000000
|
|
* AHB Prescaler = 1
|
|
* APB1 Prescaler = 2
|
|
* APB2 Prescaler = 1
|
|
* HSE Frequency(Hz) = 8000000
|
|
* PLL_M = 8
|
|
* PLL_N = 200
|
|
* PLL_P = 2
|
|
* PLL_Q = 7
|
|
* PLL_R = 2
|
|
* VDD(V) = 3.3
|
|
* Main regulator output voltage = Scale1 mode
|
|
* Flash Latency(WS) = 3
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SystemClock_Config(void)
|
|
{
|
|
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
|
RCC_OscInitTypeDef RCC_OscInitStruct;
|
|
HAL_StatusTypeDef ret = HAL_OK;
|
|
|
|
/* Enable Power Control clock */
|
|
__HAL_RCC_PWR_CLK_ENABLE();
|
|
|
|
/* The voltage scaling allows optimizing the power consumption when the device is
|
|
clocked below the maximum system frequency, to update the voltage scaling value
|
|
regarding system frequency refer to product datasheet. */
|
|
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
|
|
|
/* Enable HSE Oscillator and activate PLL with HSE as source */
|
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
|
RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS;
|
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
|
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
|
RCC_OscInitStruct.PLL.PLLM = 8;
|
|
RCC_OscInitStruct.PLL.PLLN = 200;
|
|
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
|
|
RCC_OscInitStruct.PLL.PLLQ = 7;
|
|
RCC_OscInitStruct.PLL.PLLR = 2;
|
|
ret = HAL_RCC_OscConfig(&RCC_OscInitStruct);
|
|
|
|
if(ret != HAL_OK)
|
|
{
|
|
while(1) { ; }
|
|
}
|
|
|
|
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2
|
|
clocks dividers */
|
|
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
|
|
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
|
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
|
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
|
|
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
|
ret = HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3);
|
|
if(ret != HAL_OK)
|
|
{
|
|
while(1) { ; }
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief This function is executed in case of error occurrence.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void Error_Handler(void)
|
|
{
|
|
/* Turn LED2 on */
|
|
BSP_LED_On(LED2);
|
|
while(1)
|
|
{
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief SYSTICK callback
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void HAL_SYSTICK_Callback(void)
|
|
{
|
|
HAL_IncTick();
|
|
}
|
|
|
|
/**
|
|
* @brief Wake Up Timer callback
|
|
* @param hrtc : hrtc handle
|
|
* @retval None
|
|
*/
|
|
void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc)
|
|
{
|
|
/* NOTE : add the specific code to handle the RTC wake up interrupt */
|
|
uwCounter = 1;
|
|
}
|
|
|
|
/**
|
|
* @brief EXTI line detection callbacks
|
|
* @param GPIO_Pin: Specifies the pins connected EXTI line
|
|
* @retval None
|
|
*/
|
|
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
|
|
{
|
|
/* Configure LED1 */
|
|
BSP_LED_Init(LED1);
|
|
/* NOTE : add the specific code to handle the wake up button interrupt */
|
|
if(GPIO_Pin == USER_BUTTON_PIN)
|
|
{
|
|
uwCounter = 2;
|
|
}
|
|
}
|
|
|
|
#ifdef USE_FULL_ASSERT
|
|
/**
|
|
* @brief Reports the name of the source file and the source line number
|
|
* where the assert_param error has occurred.
|
|
* @param file: pointer to the source file name
|
|
* @param line: assert_param error line source number
|
|
* @retval None
|
|
*/
|
|
void assert_failed(uint8_t* file, uint32_t line)
|
|
{
|
|
/* User can add his own implementation to report the file name and line number,
|
|
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
|
|
|
/* Infinite loop */
|
|
while (1)
|
|
{
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|