mirror of
https://github.com/STMicroelectronics/STM32CubeF4.git
synced 2025-05-02 22:17:06 +08:00
324 lines
12 KiB
C
324 lines
12 KiB
C
/**
|
|
******************************************************************************
|
|
* @file FLASH/FLASH_WriteProtection/Src/main.c
|
|
* @author MCD Application Team
|
|
* @brief This example provides a description of how to erase and program the
|
|
* STM32F4xx FLASH.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "main.h"
|
|
|
|
/** @addtogroup STM32F4xx_HAL_Examples
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup FLASH_WriteProtection
|
|
* @{
|
|
*/
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
#define FLASH_WRP_SECTORS (OB_WRP_SECTOR_3 | OB_WRP_SECTOR_4 | OB_WRP_SECTOR_10) /* sectors 3, 4 and 10 */
|
|
|
|
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
FLASH_OBProgramInitTypeDef OBInit;
|
|
__IO uint32_t SectorsWRPStatus = 0xFFF;
|
|
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
static void SystemClock_Config(void);
|
|
|
|
/* Private functions ---------------------------------------------------------*/
|
|
|
|
/**
|
|
* @brief Main program
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
int main(void)
|
|
{
|
|
/* STM32F4xx HAL library initialization:
|
|
- Configure the Flash prefetch, instruction and Data caches
|
|
- Configure the Systick to generate an interrupt each 1 msec
|
|
- Set NVIC Group Priority to 4
|
|
- Global MSP (MCU Support Package) initialization
|
|
*/
|
|
HAL_Init();
|
|
|
|
/* Configure the system clock to 180 MHz */
|
|
SystemClock_Config();
|
|
|
|
/* Configure TAMPER Button */
|
|
BSP_PB_Init(BUTTON_TAMPER, BUTTON_MODE_GPIO);
|
|
|
|
/*##-1- Initialize the LCD #################################################*/
|
|
/* Initialize the LCD */
|
|
BSP_LCD_Init();
|
|
|
|
/* Set LCD font */
|
|
BSP_LCD_SetFont(&Font20);
|
|
|
|
/* LCD Layer Initialization */
|
|
BSP_LCD_LayerDefaultInit(1, 0xC0130000);
|
|
|
|
BSP_LCD_SelectLayer(1);
|
|
|
|
BSP_LCD_DisplayOn();
|
|
|
|
/*##-2- Display messages on LCD ############################################*/
|
|
/* Clear the LCD */
|
|
BSP_LCD_Clear(LCD_COLOR_WHITE);
|
|
|
|
/* Set the LCD Text Color */
|
|
BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
|
|
|
|
/* Display test name on LCD */
|
|
BSP_LCD_DisplayStringAt(0, 0, (uint8_t*)"Flash Write", CENTER_MODE);
|
|
BSP_LCD_DisplayStringAt(0, 20, (uint8_t*)"protection test", CENTER_MODE);
|
|
BSP_LCD_DisplayStringAt(0, 40, (uint8_t*)"Press User", CENTER_MODE);
|
|
BSP_LCD_DisplayStringAt(0, 60, (uint8_t*)"Tamper/Key-button", CENTER_MODE);
|
|
|
|
/* Infinite loop */
|
|
while (1)
|
|
{
|
|
/* Wait for TAMPER/KEY button to be pushed */
|
|
while(BSP_PB_GetState(BUTTON_TAMPER) != RESET)
|
|
{
|
|
}
|
|
|
|
/* Get FLASH_WRP_SECTORS write protection status */
|
|
HAL_FLASHEx_OBGetConfig(&OBInit);
|
|
SectorsWRPStatus = OBInit.WRPSector & FLASH_WRP_SECTORS;
|
|
|
|
if (SectorsWRPStatus == 0)
|
|
{
|
|
/* If FLASH_WRP_SECTORS are write protected, disable the write protection */
|
|
|
|
/* Allow Access to option bytes sector */
|
|
HAL_FLASH_OB_Unlock();
|
|
|
|
/* Allow Access to Flash control registers and user Falsh */
|
|
HAL_FLASH_Unlock();
|
|
|
|
/* Disable FLASH_WRP_SECTORS write protection */
|
|
OBInit.OptionType = OPTIONBYTE_WRP;
|
|
OBInit.WRPState = OB_WRPSTATE_DISABLE;
|
|
OBInit.Banks = FLASH_BANK_1;
|
|
OBInit.WRPSector = FLASH_WRP_SECTORS;
|
|
HAL_FLASHEx_OBProgram(&OBInit);
|
|
|
|
/* Start the Option Bytes programming process */
|
|
if (HAL_FLASH_OB_Launch() != HAL_OK)
|
|
{
|
|
/* User can add here some code to deal with this error */
|
|
while (1)
|
|
{
|
|
}
|
|
}
|
|
|
|
/* Prevent Access to option bytes sector */
|
|
HAL_FLASH_OB_Lock();
|
|
|
|
/* Disable the Flash option control register access (recommended to protect
|
|
the option Bytes against possible unwanted operations) */
|
|
HAL_FLASH_Lock();
|
|
|
|
/* Get FLASH_WRP_SECTORS write protection status */
|
|
HAL_FLASHEx_OBGetConfig(&OBInit);
|
|
SectorsWRPStatus = OBInit.WRPSector & FLASH_WRP_SECTORS;
|
|
|
|
/* Check if FLASH_WRP_SECTORS write protection is disabled */
|
|
if (SectorsWRPStatus == FLASH_WRP_SECTORS)
|
|
{
|
|
/* Set the LCD Text Color */
|
|
BSP_LCD_SetTextColor(LCD_COLOR_GREEN);
|
|
|
|
BSP_LCD_DisplayStringAt(0, 100, (uint8_t*)"Write", CENTER_MODE);
|
|
BSP_LCD_DisplayStringAt(0, 120, (uint8_t*)"protection is", CENTER_MODE);
|
|
BSP_LCD_DisplayStringAt(0, 140, (uint8_t*)"disabled", CENTER_MODE);
|
|
}
|
|
else
|
|
{
|
|
/* Set the LCD Text Color */
|
|
BSP_LCD_SetTextColor(LCD_COLOR_RED);
|
|
|
|
BSP_LCD_DisplayStringAt(0, 100, (uint8_t*)"Write", CENTER_MODE);
|
|
BSP_LCD_DisplayStringAt(0, 120, (uint8_t*)"protection is", CENTER_MODE);
|
|
BSP_LCD_DisplayStringAt(0, 140, (uint8_t*)"not disabled", CENTER_MODE);
|
|
}
|
|
}
|
|
else
|
|
{ /* If FLASH_WRP_SECTORS are not write protected, enable the write protection */
|
|
|
|
/* Allow Access to option bytes sector */
|
|
HAL_FLASH_OB_Unlock();
|
|
|
|
/* Allow Access to Flash control registers and user Falsh */
|
|
HAL_FLASH_Unlock();
|
|
|
|
/* Enable FLASH_WRP_SECTORS write protection */
|
|
OBInit.OptionType = OPTIONBYTE_WRP;
|
|
OBInit.WRPState = OB_WRPSTATE_ENABLE;
|
|
OBInit.Banks = FLASH_BANK_1;
|
|
OBInit.WRPSector = FLASH_WRP_SECTORS;
|
|
HAL_FLASHEx_OBProgram(&OBInit);
|
|
|
|
/* Start the Option Bytes programming process */
|
|
if (HAL_FLASH_OB_Launch() != HAL_OK)
|
|
{
|
|
/* User can add here some code to deal with this error */
|
|
while (1)
|
|
{
|
|
}
|
|
}
|
|
|
|
/* Prevent Access to option bytes sector */
|
|
HAL_FLASH_OB_Lock();
|
|
|
|
/* Disable the Flash option control register access (recommended to protect
|
|
the option Bytes against possible unwanted operations) */
|
|
HAL_FLASH_Lock();
|
|
|
|
/* Get FLASH_WRP_SECTORS write protection status */
|
|
HAL_FLASHEx_OBGetConfig(&OBInit);
|
|
SectorsWRPStatus = OBInit.WRPSector & FLASH_WRP_SECTORS;
|
|
|
|
/* Check if FLASH_WRP_SECTORS are write protected */
|
|
if (SectorsWRPStatus == 0)
|
|
{
|
|
/* Set the LCD Text Color */
|
|
BSP_LCD_SetTextColor(LCD_COLOR_GREEN);
|
|
|
|
BSP_LCD_DisplayStringAt(0, 100, (uint8_t*)"Write", CENTER_MODE);
|
|
BSP_LCD_DisplayStringAt(0, 120, (uint8_t*)"protection is", CENTER_MODE);
|
|
BSP_LCD_DisplayStringAt(0, 140, (uint8_t*)" enabled ", CENTER_MODE);
|
|
}
|
|
else
|
|
{
|
|
/* Set the LCD Text Color */
|
|
BSP_LCD_SetTextColor(LCD_COLOR_RED);
|
|
|
|
BSP_LCD_DisplayStringAt(0, 100, (uint8_t*)"Write", CENTER_MODE);
|
|
BSP_LCD_DisplayStringAt(0, 120, (uint8_t*)"protection is", CENTER_MODE);
|
|
BSP_LCD_DisplayStringAt(0, 140, (uint8_t*)"not enabled", CENTER_MODE);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief System Clock Configuration
|
|
* The system Clock is configured as follow :
|
|
* System Clock source = PLL (HSE)
|
|
* SYSCLK(Hz) = 180000000
|
|
* HCLK(Hz) = 180000000
|
|
* AHB Prescaler = 1
|
|
* APB1 Prescaler = 4
|
|
* APB2 Prescaler = 2
|
|
* HSE Frequency(Hz) = 25000000
|
|
* PLL_M = 25
|
|
* PLL_N = 360
|
|
* PLL_P = 2
|
|
* PLL_Q = 7
|
|
* VDD(V) = 3.3
|
|
* Main regulator output voltage = Scale1 mode
|
|
* Flash Latency(WS) = 5
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SystemClock_Config(void)
|
|
{
|
|
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
|
RCC_OscInitTypeDef RCC_OscInitStruct;
|
|
|
|
/* Enable Power Control clock */
|
|
__HAL_RCC_PWR_CLK_ENABLE();
|
|
|
|
/* The voltage scaling allows optimizing the power consumption when the device is
|
|
clocked below the maximum system frequency, to update the voltage scaling value
|
|
regarding system frequency refer to product datasheet. */
|
|
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
|
|
|
/* Enable HSE Oscillator and activate PLL with HSE as source */
|
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
|
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
|
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
|
RCC_OscInitStruct.PLL.PLLM = 25;
|
|
RCC_OscInitStruct.PLL.PLLN = 360;
|
|
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
|
|
RCC_OscInitStruct.PLL.PLLQ = 7;
|
|
HAL_RCC_OscConfig(&RCC_OscInitStruct);
|
|
|
|
/* Activate the Over-Drive mode */
|
|
HAL_PWREx_EnableOverDrive();
|
|
|
|
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2
|
|
clocks dividers */
|
|
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
|
|
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
|
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
|
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
|
|
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
|
|
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5);
|
|
}
|
|
|
|
#ifdef USE_FULL_ASSERT
|
|
/**
|
|
* @brief Reports the name of the source file and the source line number
|
|
* where the assert_param error has occurred.
|
|
* @param file: pointer to the source file name
|
|
* @param line: assert_param error line source number
|
|
* @retval None
|
|
*/
|
|
void assert_failed(uint8_t* file, uint32_t line)
|
|
{
|
|
/* User can add his own implementation to report the file name and line number,
|
|
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
|
|
|
/* Infinite loop */
|
|
while (1)
|
|
{
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|