mirror of
https://github.com/STMicroelectronics/STM32CubeF4.git
synced 2025-05-03 22:17:07 +08:00
354 lines
12 KiB
C
354 lines
12 KiB
C
/**
|
|
******************************************************************************
|
|
* @file ADC/ADC_TripleModeInterleaved/Src/main.c
|
|
* @author MCD Application Team
|
|
* @brief This example provides a short description of how to use the ADC
|
|
* peripheral to convert a regular channel in Triple interleaved mode.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "main.h"
|
|
|
|
|
|
/** @addtogroup STM32F4xx_HAL_Examples
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup ADC_TripleModeInterleaved
|
|
* @{
|
|
*/
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* ADC handler declaration */
|
|
ADC_HandleTypeDef AdcHandle1;
|
|
ADC_HandleTypeDef AdcHandle2;
|
|
ADC_HandleTypeDef AdcHandle3;
|
|
|
|
/* Variable used to get converted value */
|
|
__IO uint32_t aADCTripleConvertedValue[3];
|
|
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
static void SystemClock_Config(void);
|
|
static void Error_Handler(void);
|
|
static void ADC_Config(void);
|
|
|
|
/* Private functions ---------------------------------------------------------*/
|
|
|
|
/**
|
|
* @brief Main program
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
int main(void)
|
|
{
|
|
/* STM32F4xx HAL library initialization:
|
|
- Configure the Flash prefetch, instruction and Data caches
|
|
- Configure the Systick to generate an interrupt each 1 msec
|
|
- Set NVIC Group Priority to 4
|
|
- Global MSP (MCU Support Package) initialization
|
|
*/
|
|
HAL_Init();
|
|
/* Configure the system clock to 144 MHz */
|
|
SystemClock_Config();
|
|
|
|
/* Configure LED1 and LED3 */
|
|
BSP_LED_Init(LED1);
|
|
BSP_LED_Init(LED3);
|
|
|
|
/*##-1- Configure ADC1, ADC2 and ADC3 peripherals ##########################*/
|
|
ADC_Config();
|
|
|
|
/*##-2- Start ADC3 conversion process ######################################*/
|
|
if(HAL_ADC_Start(&AdcHandle3) != HAL_OK)
|
|
{
|
|
/* Start Error */
|
|
Error_Handler();
|
|
}
|
|
|
|
/*##-3- Start ADC2 conversion process ######################################*/
|
|
if(HAL_ADC_Start(&AdcHandle2) != HAL_OK)
|
|
{
|
|
/* Start Error */
|
|
Error_Handler();
|
|
}
|
|
|
|
/*##-4- Start ADC1 conversion process and enable DMA #######################*/
|
|
/* Note: Considering IT occurring after each number of ADC conversions */
|
|
/* (IT by DMA end of transfer), select sampling time and ADC clock */
|
|
/* with sufficient duration to not create an overhead situation in */
|
|
/* IRQHandler. */
|
|
if(HAL_ADCEx_MultiModeStart_DMA(&AdcHandle1, (uint32_t*)aADCTripleConvertedValue, 3) != HAL_OK)
|
|
{
|
|
/* Start Error */
|
|
Error_Handler();
|
|
}
|
|
|
|
/* Infinite loop */
|
|
while (1)
|
|
{
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief System Clock Configuration
|
|
* The system Clock is configured as follow :
|
|
* System Clock source = PLL (HSE)
|
|
* SYSCLK(Hz) = 144000000
|
|
* HCLK(Hz) = 144000000
|
|
* AHB Prescaler = 1
|
|
* APB1 Prescaler = 4
|
|
* APB2 Prescaler = 2
|
|
* HSE Frequency(Hz) = 25000000
|
|
* PLL_M = 25
|
|
* PLL_N = 288
|
|
* PLL_P = 2
|
|
* PLL_Q = 6
|
|
* VDD(V) = 3.3
|
|
* Main regulator output voltage = Scale2 mode
|
|
* Flash Latency(WS) = 5
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SystemClock_Config(void)
|
|
{
|
|
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
|
RCC_OscInitTypeDef RCC_OscInitStruct;
|
|
|
|
/* Enable Power Control clock */
|
|
__HAL_RCC_PWR_CLK_ENABLE();
|
|
|
|
/* The voltage scaling allows optimizing the power consumption when the device is
|
|
clocked below the maximum system frequency, to update the voltage scaling value
|
|
regarding system frequency refer to product datasheet. */
|
|
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
|
|
|
|
/* Enable HSE Oscillator and activate PLL with HSE as source */
|
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
|
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
|
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
|
RCC_OscInitStruct.PLL.PLLM = 25;
|
|
RCC_OscInitStruct.PLL.PLLN = 288;
|
|
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
|
|
RCC_OscInitStruct.PLL.PLLQ = 6;
|
|
HAL_RCC_OscConfig(&RCC_OscInitStruct);
|
|
|
|
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2
|
|
clocks dividers */
|
|
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
|
|
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
|
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
|
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
|
|
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
|
|
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4);
|
|
}
|
|
|
|
/**
|
|
* @brief This function is executed in case of error occurrence.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void Error_Handler(void)
|
|
{
|
|
/* Turn LED3 on */
|
|
BSP_LED_On(LED3);
|
|
while(1)
|
|
{
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief ADC configuration
|
|
* @note This function Configure the ADC peripheral
|
|
1) Enable peripheral clocks
|
|
2) Configure ADC Channel 12 pin as analog input
|
|
3) DMA2_Stream0 channel2 configuration
|
|
4) Configure ADC1 Channel 12
|
|
5) Configure ADC2 Channel 12
|
|
6) Configure ADC3 Channel 12
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void ADC_Config(void)
|
|
{
|
|
ADC_ChannelConfTypeDef sConfig;
|
|
ADC_MultiModeTypeDef mode;
|
|
|
|
/*##-1- Configure the ADC3 peripheral #######################################*/
|
|
AdcHandle3.Instance = ADCz;
|
|
|
|
AdcHandle3.Init.ClockPrescaler = ADC_CLOCKPRESCALER_PCLK_DIV2;
|
|
AdcHandle3.Init.Resolution = ADC_RESOLUTION_12B;
|
|
AdcHandle3.Init.ScanConvMode = DISABLE;
|
|
AdcHandle3.Init.ContinuousConvMode = ENABLE;
|
|
AdcHandle3.Init.DiscontinuousConvMode = DISABLE;
|
|
AdcHandle3.Init.NbrOfDiscConversion = 0;
|
|
AdcHandle3.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
|
|
AdcHandle3.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T1_CC1;
|
|
AdcHandle3.Init.DataAlign = ADC_DATAALIGN_RIGHT;
|
|
AdcHandle3.Init.NbrOfConversion = 1;
|
|
AdcHandle3.Init.DMAContinuousRequests = DISABLE;
|
|
AdcHandle3.Init.EOCSelection = DISABLE;
|
|
|
|
if(HAL_ADC_Init(&AdcHandle3) != HAL_OK)
|
|
{
|
|
/* Initialization Error */
|
|
Error_Handler();
|
|
}
|
|
|
|
/*##-2- Configure ADC3 regular channel #####################################*/
|
|
sConfig.Channel = ADCxyz_CHANNEL;
|
|
sConfig.Rank = 1;
|
|
sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES;
|
|
sConfig.Offset = 0;
|
|
|
|
if(HAL_ADC_ConfigChannel(&AdcHandle3, &sConfig) != HAL_OK)
|
|
{
|
|
/* Channel Configuration Error */
|
|
Error_Handler();
|
|
}
|
|
|
|
/*##-3- Configure the ADC2 peripheral ######################################*/
|
|
AdcHandle2.Instance = ADCy;
|
|
|
|
AdcHandle2.Init.ClockPrescaler = ADC_CLOCKPRESCALER_PCLK_DIV2;
|
|
AdcHandle2.Init.Resolution = ADC_RESOLUTION_12B;
|
|
AdcHandle2.Init.ScanConvMode = DISABLE;
|
|
AdcHandle2.Init.ContinuousConvMode = ENABLE;
|
|
AdcHandle2.Init.DiscontinuousConvMode = DISABLE;
|
|
AdcHandle2.Init.NbrOfDiscConversion = 0;
|
|
AdcHandle2.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
|
|
AdcHandle2.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T1_CC1;
|
|
AdcHandle2.Init.DataAlign = ADC_DATAALIGN_RIGHT;
|
|
AdcHandle2.Init.NbrOfConversion = 1;
|
|
AdcHandle2.Init.DMAContinuousRequests = DISABLE;
|
|
AdcHandle2.Init.EOCSelection = DISABLE;
|
|
|
|
if(HAL_ADC_Init(&AdcHandle2) != HAL_OK)
|
|
{
|
|
/* Initialization Error */
|
|
Error_Handler();
|
|
}
|
|
|
|
/*##-4- Configure ADC2 regular channel #####################################*/
|
|
if(HAL_ADC_ConfigChannel(&AdcHandle2, &sConfig) != HAL_OK)
|
|
{
|
|
/* Channel Configuration Error */
|
|
Error_Handler();
|
|
}
|
|
|
|
/*##-5- Configure the ADC1 peripheral ######################################*/
|
|
AdcHandle1.Instance = ADCx;
|
|
|
|
AdcHandle1.Init.ClockPrescaler = ADC_CLOCKPRESCALER_PCLK_DIV2;
|
|
AdcHandle1.Init.Resolution = ADC_RESOLUTION_12B;
|
|
AdcHandle1.Init.ScanConvMode = DISABLE;
|
|
AdcHandle1.Init.ContinuousConvMode = ENABLE;
|
|
AdcHandle1.Init.DiscontinuousConvMode = DISABLE;
|
|
AdcHandle1.Init.NbrOfDiscConversion = 0;
|
|
AdcHandle1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
|
|
AdcHandle1.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T1_CC1;
|
|
AdcHandle1.Init.DataAlign = ADC_DATAALIGN_RIGHT;
|
|
AdcHandle1.Init.NbrOfConversion = 1;
|
|
AdcHandle1.Init.DMAContinuousRequests = ENABLE;
|
|
AdcHandle1.Init.EOCSelection = DISABLE;
|
|
|
|
if(HAL_ADC_Init(&AdcHandle1) != HAL_OK)
|
|
{
|
|
/* Initialization Error */
|
|
Error_Handler();
|
|
}
|
|
|
|
/*##-6- Configure ADC1 regular channel #####################################*/
|
|
if(HAL_ADC_ConfigChannel(&AdcHandle1, &sConfig) != HAL_OK)
|
|
{
|
|
/* Channel Configuration Error */
|
|
Error_Handler();
|
|
}
|
|
|
|
/*##-7- Configure Multimode ################################################*/
|
|
mode.Mode = ADC_TRIPLEMODE_INTERL;
|
|
mode.DMAAccessMode = ADC_DMAACCESSMODE_2;
|
|
mode.TwoSamplingDelay = ADC_TWOSAMPLINGDELAY_5CYCLES;
|
|
|
|
if(HAL_ADCEx_MultiModeConfigChannel(&AdcHandle1, &mode) != HAL_OK)
|
|
{
|
|
/* Multimode Configuration Error */
|
|
Error_Handler();
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Conversion complete callback in non blocking mode
|
|
* @param hadc: ADC handle
|
|
* @note This example shows a simple way to report end of conversion, and
|
|
* you can add your own implementation.
|
|
* @retval None
|
|
*/
|
|
void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc)
|
|
{
|
|
/* Turn LED1 on: Transfer process is correct */
|
|
BSP_LED_On(LED1);
|
|
}
|
|
|
|
#ifdef USE_FULL_ASSERT
|
|
/**
|
|
* @brief Reports the name of the source file and the source line number
|
|
* where the assert_param error has occurred.
|
|
* @param file: pointer to the source file name
|
|
* @param line: assert_param error line source number
|
|
* @retval None
|
|
*/
|
|
void assert_failed(uint8_t* file, uint32_t line)
|
|
{
|
|
/* User can add his own implementation to report the file name and line number,
|
|
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
|
|
|
/* Infinite loop */
|
|
while (1)
|
|
{
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|