mirror of
https://github.com/STMicroelectronics/STM32CubeF4.git
synced 2025-05-10 19:29:12 +08:00
108 lines
4.8 KiB
Plaintext
108 lines
4.8 KiB
Plaintext
/**
|
|
@page FatFs_RAMDisk_RTOS FatFs with RAM disk drive in RTOS mode application
|
|
|
|
@verbatim
|
|
******************** (C) COPYRIGHT 2017 STMicroelectronics *******************
|
|
* @file FatFs/FatFs_RAMDisk_RTOS/readme.txt
|
|
* @author MCD Application Team
|
|
* @brief Description of the FatFs with RAM disk drive in RTOS mode application
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2017 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
@endverbatim
|
|
|
|
@par Application Description
|
|
|
|
How to use STM32Cube firmware with FatFs middleware component as a generic FAT
|
|
file system module. This example develops an application exploiting FatFs
|
|
features with a RAM disk (SRAM) drive in RTOS mode configuration.
|
|
|
|
At the beginning of the main program the HAL_Init() function is called to reset
|
|
all the peripherals, initialize the Flash interface and the systick.
|
|
Then the SystemClock_Config() function is used to configure the system clock
|
|
(SYSCLK) to run at 180 MHz.
|
|
|
|
The application is based on writing and reading back a text file from a drive,
|
|
it creates a normal priority thread and it's performed using FatFs APIs to
|
|
access the FAT volume as described in the following steps:
|
|
|
|
- Link the SDRAM disk I/O driver;
|
|
- Register the file system object (mount) to the FatFs module for the SDRAM drive;
|
|
- Create a FAT file system (format) on the SDRAM drive;
|
|
- Create and Open new text file object with write access;
|
|
- Write data to the text file;
|
|
- Close the open text file;
|
|
- Open text file object with read access;
|
|
- Read back data from the text file;
|
|
- Close the open text file;
|
|
- Check on read data from text file;
|
|
- Unlink the SDRAM disk I/O driver.
|
|
|
|
It is worth noting that the application manages any error occurred during the
|
|
access to FAT volume, when using FatFs APIs.
|
|
|
|
It is possible to fine tune needed FatFs features by modifying defines values
|
|
in FatFs configuration file "ffconf.h" available under the project includes
|
|
directory, in a way to fit the application requirements.
|
|
|
|
STM32 Eval boards LEDs can be used to monitor the application status:
|
|
- LED1 is ON when the application runs successfully.
|
|
- LED3 is ON when any error occurs.
|
|
|
|
|
|
@note Care must be taken when using HAL_Delay(), this function provides accurate delay (in milliseconds)
|
|
based on variable incremented in HAL time base ISR. This implies that if HAL_Delay() is called from
|
|
a peripheral ISR process, then the HAL time base interrupt must have higher priority (numerically lower)
|
|
than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
|
|
To change the HAL time base interrupt priority you have to use HAL_NVIC_SetPriority() function.
|
|
|
|
@note The application needs to ensure that the HAL time base is always set to 1 millisecond to have correct
|
|
HAL operation.
|
|
|
|
@note The FreeRTOS heap size configTOTAL_HEAP_SIZE defined in FreeRTOSConfig.h is set according to the OS resources memory requirements of the application with +10% margin and rounded to the upper Kbyte boundary.
|
|
|
|
For more details about FatFs implementation on STM32Cube, please refer to UM1721 "Developing Applications
|
|
on STM32Cube with FatFs".
|
|
|
|
@par Keywords
|
|
|
|
FatFS, RAMDisk, SRAM, FAT, File system, Mount, Format, FreeRTOS, RTOS
|
|
|
|
@par Directory contents
|
|
|
|
- FatFs/FatFs_RAMDisk_RTOS/Inc/stm32f4xx_hal_conf.h HAL configuration file
|
|
- FatFs/FatFs_RAMDisk_RTOS/Inc/stm32f4xx_it.h Interrupt handlers header file
|
|
- FatFs/FatFs_RAMDisk_RTOS/Inc/main.h Main program header file
|
|
- FatFs/FatFs_RAMDisk_RTOS/Inc/sdram_diskio.h FatFS sdram diskio driver header file
|
|
- FatFs/FatFs_RAMDisk_RTOS/Inc/ffconf.h FAT file system module configuration file
|
|
- FatFs/FatFs_RAMDisk_RTOS/Src/stm32f4xx_it.c Interrupt handlers
|
|
- FatFs/FatFs_RAMDisk_RTOS/Src/main.c Main program
|
|
- FatFs/FatFs_RAMDisk_RTOS/Src/sdram_diskio.c FatFS sdram diskio driver implementation
|
|
- FatFs/FatFs_RAMDisk_RTOS/Src/system_stm32f4xx.c STM32F4xx system clock configuration file
|
|
|
|
@par Hardware and Software environment
|
|
|
|
- This application runs on STM32F429xx/STM32F439xx devices.
|
|
|
|
- This application has been tested with STMicroelectronics STM324x9I-EVAL RevB
|
|
evaluation boards and can be easily tailored to any other supported device
|
|
and development board.
|
|
|
|
|
|
@par How to use it ?
|
|
|
|
In order to make the program work, you must do the following :
|
|
- Open your preferred toolchain
|
|
- Rebuild all files and load your image into target memory
|
|
- Run the application
|
|
|
|
*/
|