mirror of
https://github.com/STMicroelectronics/STM32CubeF4.git
synced 2025-04-30 13:48:52 +08:00
235 lines
7.0 KiB
C
235 lines
7.0 KiB
C
/**
|
|
******************************************************************************
|
|
* @file GPIO/GPIO_EXTI/Src/main.c
|
|
* @author MCD Application Team
|
|
* @brief This example describes how to configure and use GPIOs through
|
|
* the STM32F4xx HAL API.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
|
* All rights reserved.</center></h2>
|
|
*
|
|
* This software component is licensed by ST under BSD 3-Clause license,
|
|
* the "License"; You may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at:
|
|
* opensource.org/licenses/BSD-3-Clause
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "main.h"
|
|
|
|
/** @addtogroup STM32F4xx_HAL_Examples
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup GPIO_EXTI
|
|
* @{
|
|
*/
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
static void SystemClock_Config(void);
|
|
static void Error_Handler(void);
|
|
static void EXTILine0_Config(void);
|
|
|
|
/* Private functions ---------------------------------------------------------*/
|
|
|
|
/**
|
|
* @brief Main program
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
int main(void)
|
|
{
|
|
/* This sample code shows how to use STM32F4xx GPIO HAL API to toggle PD12, PD13,
|
|
PD14, and PD14 IOs (connected to LED4, LED3, LED5 and LED6 on STM32F401C-DISCO board (MB1115B))
|
|
in an infinite loop.
|
|
To proceed, 3 steps are required: */
|
|
|
|
/* STM32F4xx HAL library initialization:
|
|
- Configure the Flash prefetch, instruction and Data caches
|
|
- Configure the Systick to generate an interrupt each 1 msec
|
|
- Set NVIC Group Priority to 4
|
|
- Global MSP (MCU Support Package) initialization
|
|
*/
|
|
HAL_Init();
|
|
|
|
/* Configure LED3, LED4, LED5 and LED6 */
|
|
BSP_LED_Init(LED3);
|
|
BSP_LED_Init(LED4);
|
|
BSP_LED_Init(LED5);
|
|
BSP_LED_Init(LED6);
|
|
|
|
/* Configure the system clock to 168 MHz */
|
|
SystemClock_Config();
|
|
|
|
/* Configure EXTI Line0 (connected to PA0 pin) in interrupt mode */
|
|
EXTILine0_Config();
|
|
|
|
/* Infinite loop */
|
|
while (1)
|
|
{
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief System Clock Configuration
|
|
* The system Clock is configured as follow :
|
|
* System Clock source = PLL (HSE)
|
|
* SYSCLK(Hz) = 168000000
|
|
* HCLK(Hz) = 168000000
|
|
* AHB Prescaler = 1
|
|
* APB1 Prescaler = 4
|
|
* APB2 Prescaler = 2
|
|
* HSE Frequency(Hz) = 8000000
|
|
* PLL_M = 8
|
|
* PLL_N = 336
|
|
* PLL_P = 2
|
|
* PLL_Q = 7
|
|
* VDD(V) = 3.3
|
|
* Main regulator output voltage = Scale1 mode
|
|
* Flash Latency(WS) = 5
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SystemClock_Config(void)
|
|
{
|
|
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
|
RCC_OscInitTypeDef RCC_OscInitStruct;
|
|
|
|
/* Enable Power Control clock */
|
|
__HAL_RCC_PWR_CLK_ENABLE();
|
|
|
|
/* The voltage scaling allows optimizing the power consumption when the device is
|
|
clocked below the maximum system frequency, to update the voltage scaling value
|
|
regarding system frequency refer to product datasheet. */
|
|
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
|
|
|
/* Enable HSE Oscillator and activate PLL with HSE as source */
|
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
|
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
|
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
|
RCC_OscInitStruct.PLL.PLLM = 8;
|
|
RCC_OscInitStruct.PLL.PLLN = 336;
|
|
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
|
|
RCC_OscInitStruct.PLL.PLLQ = 7;
|
|
if(HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
|
|
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2
|
|
clocks dividers */
|
|
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
|
|
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
|
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
|
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
|
|
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
|
|
if(HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
|
|
/* STM32F405x/407x/415x/417x Revision Z devices: prefetch is supported */
|
|
if (HAL_GetREVID() == 0x1001)
|
|
{
|
|
/* Enable the Flash prefetch */
|
|
__HAL_FLASH_PREFETCH_BUFFER_ENABLE();
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Configures EXTI Line0 (connected to PA0 pin) in interrupt mode
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void EXTILine0_Config(void)
|
|
{
|
|
GPIO_InitTypeDef GPIO_InitStructure;
|
|
|
|
/* Enable GPIOA clock */
|
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
|
|
|
/* Configure PA0 pin as input floating */
|
|
GPIO_InitStructure.Mode = GPIO_MODE_IT_FALLING;
|
|
GPIO_InitStructure.Pull = GPIO_NOPULL;
|
|
GPIO_InitStructure.Pin = GPIO_PIN_0;
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStructure);
|
|
|
|
/* Enable and set EXTI Line0 Interrupt to the lowest priority */
|
|
HAL_NVIC_SetPriority(EXTI0_IRQn, 2, 0);
|
|
HAL_NVIC_EnableIRQ(EXTI0_IRQn);
|
|
}
|
|
|
|
/**
|
|
* @brief EXTI line detection callbacks
|
|
* @param GPIO_Pin: Specifies the pins connected EXTI line
|
|
* @retval None
|
|
*/
|
|
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
|
|
{
|
|
if(GPIO_Pin == KEY_BUTTON_PIN)
|
|
{
|
|
/* Toggle LED3 */
|
|
BSP_LED_Toggle(LED3);
|
|
/* Toggle LED4 */
|
|
BSP_LED_Toggle(LED4);
|
|
/* Toggle LED5 */
|
|
BSP_LED_Toggle(LED5);
|
|
/* Toggle LED6 */
|
|
BSP_LED_Toggle(LED6);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief This function is executed in case of error occurrence.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void Error_Handler(void)
|
|
{
|
|
/* Turn LED5 on */
|
|
BSP_LED_On(LED5);
|
|
while(1)
|
|
{
|
|
}
|
|
}
|
|
|
|
#ifdef USE_FULL_ASSERT
|
|
|
|
/**
|
|
* @brief Reports the name of the source file and the source line number
|
|
* where the assert_param error has occurred.
|
|
* @param file: pointer to the source file name
|
|
* @param line: assert_param error line source number
|
|
* @retval None
|
|
*/
|
|
void assert_failed(uint8_t* file, uint32_t line)
|
|
{
|
|
/* User can add his own implementation to report the file name and line number,
|
|
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
|
|
|
/* Infinite loop */
|
|
while (1)
|
|
{
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|