STM32CubeF4

@verbatim
******************** (C) COPYRIGHT 2017 STMicroelectronics *******************
* @file CRYP/CRYP_AESmodes/readme.txt
* @author MCD Application Team
* @brief Description of the CRYP AES encryption/decryption mode
* with ECB, CBC and CTR algorithm.
******************************************************************************
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
@endverbatim

@par Example Description

How to use the CRYP peripheral to encrypt/decrypt data(Plaintext/Ciphertext) using AES
ECB, CBC and CTR algorithm.

At the beginning of the main program the HAL_Init() function is called to reset
all the peripherals, initialize the Flash interface and the systick.
The SystemClock_Config() function is used to configure the system clock for STM32F417xx Devices

The AES mode requires:
1. Plaintext/Ciphertext: which will be encrypted with several algorithm & keys.
CiphertextAESECB128,CiphertextAESCBC192 and CiphertextAESCTR256 : which will
be decrypted respectively with ECB algorithm & 128bits key, CBC algorithm &
192bits key and CTR algorithm & 256 key.

3. InitVector or the Initialization Vector used only for CBC and CTR.

4. Key: is the parameter which determines the Ciphertext. In this example several
key size are used, 128 bits for ECB, 192 bits for CBC and 256 bits for CTR.

CRYP peripheral must be initialized once from the beginning, then for each
operation of encryption/decryption, only configuration should be made if needed.

The AES-ECB encryption/decryption in polling mode provide :
1. Encryptedtext: which is the encryption result of Plaintext, it is compared
to CiphertextAESECB128.
2. Decryptedtext: which is the Decryption result of Ciphertext,it is compared
to Plaintext.

The AES-CBC encryption/decryption in DMA mode provide :
1. Encryptedtext: which is the encryption result of Plaintext, it is compared
to CiphertextAESCBC192.
2. Decryptedtext: which is the Decryption result of Ciphertext,it is compared
to Plaintext.

The AES-CTR encryption/decryption in interrupt mode provide:
1. Encryptedtext: which is the encryption result of Plaintext, it is compared
to CiphertextAESCTR256.
2. Decryptedtext: which is the Decryption result of Ciphertext,it is compared
to Plaintext.

STM3241G-EVAL LEDs are used to monitor the encryption/decryption status:
- LED1(GREEN) is ON when encryption/decryption are right.
- LED3(RED) is ON when encryption or decryption are wrong.

@note Care must be taken when using HAL_Delay(), this function provides accurate delay (in milliseconds)
based on variable incremented in SysTick ISR. This implies that if HAL_Delay() is called from
a peripheral ISR process, then the SysTick interrupt must have higher priority (numerically lower)
than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
To change the SysTick interrupt priority you have to use HAL_NVIC_SetPriority() function.

@note The application needs to ensure that the SysTick time base is always set to 1 millisecond
to have correct HAL operation.

@par Keywords

Security, CRYP, AES, ECB, CBC,CTR, NIST FIPS publication 197, hardware CRYP,

@par Directory contents

- CRYP/CRYP_AESModes/Inc/stm32f4xx_hal_conf.h HAL configuration file
- CRYP/CRYP_AESModes/Inc/stm32f4xx_it.h Interrupt handlers header file
- CRYP/CRYP_AESModes/Inc/main.h Header for main.c module
- CRYP/CRYP_AESModes/Src/stm32f4xx_it.c Interrupt handlers
- CRYP/CRYP_AESModes/Src/main.c Main program
- CRYP/CRYP_AESModes/Src/stm32f4xx_hal_msp.c HAL MSP module
- CRYP/CRYP_AESModes/Src/system_stm32f4xx.c STM32F4xx system source file

@par Hardware and Software environment

- This example runs on STM32F417xx devices.

- This example has been tested with an STMicroelectronics STM32417G-EVAL RevC
board and can be easily tailored to any other supported device
and development board.

@par How to use it ?

In order to make the program work, you must do the following:
- Open your preferred toolchain
- Rebuild all files and load your image into target memory
- Run the example