mirror of
https://github.com/STMicroelectronics/STM32CubeF4.git
synced 2025-05-02 22:17:06 +08:00
81 lines
3.7 KiB
Plaintext
81 lines
3.7 KiB
Plaintext
/**
|
|
@page FreeRTOS_SemaphoreFromISR FreeRTOS semaphore from ISR application
|
|
|
|
@verbatim
|
|
******************** (C) COPYRIGHT 2017 STMicroelectronics *******************
|
|
* @file FreeRTOS/FreeRTOS_SemaphoreFromISR/readme.txt
|
|
* @author MCD Application Team
|
|
* @brief Description of the FreeRTOS Semaphore From ISR application.
|
|
******************************************************************************
|
|
*
|
|
* Copyright (c) 2017 STMicroelectronics. All rights reserved.
|
|
*
|
|
* This software component is licensed by ST under Ultimate Liberty license
|
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
|
* the License. You may obtain a copy of the License at:
|
|
* www.st.com/SLA0044
|
|
*
|
|
******************************************************************************
|
|
@endverbatim
|
|
|
|
@par Application Description
|
|
|
|
How to use semaphore from ISR with CMSIS RTOS API.
|
|
|
|
This application creates a thread that toggles LED through semaphore given from ISR.
|
|
|
|
Each time the user pushes the TAMPER button of the EVAL board the semaphore
|
|
is given to the SemaphoreTest Thread to toggle the LED1
|
|
|
|
|
|
@note Care must be taken when using HAL_Delay(), this function provides accurate delay (in milliseconds)
|
|
based on variable incremented in HAL time base ISR. This implies that if HAL_Delay() is called from
|
|
a peripheral ISR process, then the HAL time base interrupt must have higher priority (numerically lower)
|
|
than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
|
|
To change the HAL time base interrupt priority you have to use HAL_NVIC_SetPriority() function.
|
|
|
|
@note The application needs to ensure that the HAL time base is always set to 1 millisecond to have correct
|
|
HAL operation.
|
|
|
|
@note The FreeRTOS heap size configTOTAL_HEAP_SIZE defined in FreeRTOSConfig.h is set according to the OS resources memory requirements of the application with +10% margin and rounded to the upper Kbyte boundary.
|
|
|
|
For more details about FreeRTOS implementation on STM32Cube, please refer to UM1722 "Developing Applications
|
|
on STM32Cube with RTOS".
|
|
|
|
|
|
@note The connection of the LCD reset pin to a dedicated GPIO PK7 instead of the STM32F469 NRST pin may cause residual display on LCD with applications/examples that do not require display.
|
|
The LCD clear can be ensured by hardware through the board's power off/power on or by software calling the BSP_LCD_Reset() function.
|
|
|
|
@par Keywords
|
|
|
|
RTOS, FreeRTOS, Thread, Semaphore, Priorities, ISR, Interrupt
|
|
|
|
@par Directory contents
|
|
|
|
- FreeRTOS/FreeRTOS_SemaphoreFromISR/Inc/main.h Main program header file
|
|
- FreeRTOS/FreeRTOS_SemaphoreFromISR/Inc/stm32f4xx_hal_conf.h HAL Library Configuration file
|
|
- FreeRTOS/FreeRTOS_SemaphoreFromISR/Inc/stm32f4xx_it.h Interrupt handlers header file
|
|
- FreeRTOS/FreeRTOS_SemaphoreFromISR/Inc/FreeRTOSConfig.h FreeRTOS Configuration file
|
|
- FreeRTOS/FreeRTOS_SemaphoreFromISR/Src/main.c Main program
|
|
- FreeRTOS/FreeRTOS_SemaphoreFromISR/Src/stm32f4xx_it.c Interrupt handlers
|
|
- FreeRTOS/FreeRTOS_SemaphoreFromISR/Src/system_stm32f4xx.c STM32F4xx system clock configuration file
|
|
|
|
|
|
@par Hardware and Software environment
|
|
|
|
- This application runs on STM32F469xx and STM32F479xx devices.
|
|
|
|
- This application has been tested with STM32469I-EVAL RevC board and can be
|
|
easily tailored to any other supported device and development board.
|
|
|
|
|
|
@par How to use it ?
|
|
|
|
In order to make the program work, you must do the following :
|
|
- Open your preferred toolchain
|
|
- Rebuild all files and load your image into target memory
|
|
- Run the application
|
|
|
|
* <h3><center>© COPYRIGHT STMicroelectronics</center></h3>
|
|
*/
|