mirror of
https://github.com/STMicroelectronics/STM32CubeF4.git
synced 2025-05-05 19:29:25 +08:00
117 lines
5.0 KiB
Plaintext
117 lines
5.0 KiB
Plaintext
/**
|
|
@page BSP Example on how to use the BSP drivers
|
|
|
|
@verbatim
|
|
******************** (C) COPYRIGHT 2017 STMicroelectronics *******************
|
|
* @file BSP/readme.txt
|
|
* @author MCD Application Team
|
|
* @brief Description of the BSP example.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2017 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
@endverbatim
|
|
|
|
@par Example Description
|
|
|
|
This example provides a description of how to use the different BSP drivers.
|
|
|
|
At the beginning of the main program the HAL_Init() function is called to reset
|
|
all the peripherals, initialize the Flash interface and the systick.
|
|
Then the SystemClock_Config() function is used to configure the system clock
|
|
(SYSCLK) to run at 175 MHz and provide 50 MHz at the output PLL divided by PLL_Q.
|
|
This frequency permit to reach 25 MHz clock needed for SD operation and in line
|
|
with microSD specification.
|
|
|
|
|
|
This example shows how to use the different functionalities of LCD, SD card,
|
|
touchscreen, joystick and external memories (SDRAM, SRAM, NOR) by switching
|
|
between all tests using key button.
|
|
|
|
Firstly, use the joystick button to move a pointer inside a rectangle
|
|
(up/down/right/left) and change the pointer color(select).
|
|
|
|
Secondly, and after the touchscreen calibration, use the touchscreen
|
|
functionality to select or activate colored circle inside a rectangle.
|
|
|
|
Thirdly, this example shows how to use the different LCD features to display string
|
|
with different fonts, to display different shapes and to draw a bitmap.
|
|
|
|
Fourthly, this example shows how to erase, write and read the SD card and also
|
|
how to detect the presence of the card.
|
|
|
|
Fifthly, this example shows how to use the LCD log features.
|
|
|
|
Sixthly, this example provides of how to write, read and buffers compare
|
|
for different external memories (SDRAM, SRAM, NOR).
|
|
|
|
Seventhly, this example shows how to read and write data in RF EEPROM. The I2C EEPROM
|
|
memory (M24LR64) is available on separate daughter board ANT7-M24LR-A, which is not
|
|
provided with the STM324x9I-EVAL board. To use this driver you have to connect the
|
|
ANT7-M24LR-A to CN3 connector of STM324x9I-EVAL board.
|
|
|
|
@note Care must be taken when using HAL_Delay(), this function provides accurate delay (in milliseconds)
|
|
based on variable incremented in SysTick ISR. This implies that if HAL_Delay() is called from
|
|
a peripheral ISR process, then the SysTick interrupt must have higher priority (numerically lower)
|
|
than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
|
|
To change the SysTick interrupt priority you have to use HAL_NVIC_SetPriority() function.
|
|
|
|
@note The application needs to ensure that the SysTick time base is always set to 1 millisecond
|
|
to have correct HAL operation.
|
|
|
|
@par Keywords
|
|
|
|
BSP, Board support package, DMA, Audio play, Headphone, Audio record, microphone, Touchscreen, Joystick,
|
|
LCD, SD Card, EEPROM, NOR, SRAM, SDRAM, LOG, QSPI
|
|
|
|
@par Directory contents
|
|
|
|
- BSP/Src/main.c Main program
|
|
- BSP/Src/system_stm32f4xx.c STM32F4xx system clock configuration file
|
|
- BSP/Src/stm32f4xx_it.c Interrupt handlers
|
|
- BSP/Src/joystick.c Joystick feature
|
|
- BSP/Src/lcd.c LCD drawing features
|
|
- BSP/Src/log.c LCD Log firmware functions
|
|
- BSP/Src/sd.c SD features
|
|
- BSP/Src/sdram.c SDRAM features
|
|
- BSP/Src/sram.c SRAM features
|
|
- BSP/Src/nor.c NOR features
|
|
- BSP/Src/eeprom.c EEPROM features
|
|
- BSP/Src/touchscreen.c Touchscreen feature
|
|
- BSP/Src/ts_calibration.c Touchscreen calibration
|
|
- BSP/Inc/main.h Main program header file
|
|
- BSP/Inc/stm32f4xx_hal_conf.h HAL configuration file
|
|
- BSP/Inc/stm32f4xx_it.h Interrupt handlers header file
|
|
- BSP/Inc/lcd_log_conf.h lcd_log configuration template file
|
|
- BSP/Inc/stlogo.h Image used for BSP example
|
|
|
|
|
|
@par Hardware and Software environment
|
|
|
|
- This example runs on STM32F429xx/STM32F439xx devices.
|
|
|
|
- This example has been tested with STMicroelectronics STM324x9I-EVAL RevB
|
|
evaluation boards and can be easily tailored to any other supported device
|
|
and development board.
|
|
|
|
- STM324x9I-EVAL RevB Setup: For NOR memory use, make sure that the Jumper JP9
|
|
is open and JP5 is put in position 1-2 (NWAIT signal connected to PD6).
|
|
|
|
|
|
@par How to use it ?
|
|
|
|
In order to make the program work, you must do the following :
|
|
- Open your preferred toolchain
|
|
- Rebuild all files and load your image into target memory
|
|
- Run the example
|
|
|
|
|
|
*/
|