/**
  ******************************************************************************
  * @file    ADC/ADC_TriggerMode/Src/main.c 
  * @author  MCD Application Team
  * @brief   This example describes how to use Timer to convert continuously data.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */

/* Includes ------------------------------------------------------------------*/
#include "main.h"


/** @addtogroup STM32F4xx_HAL_Examples
  * @{
  */

/** @addtogroup ADC_TriggerMode
  * @{
  */ 

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* ADC handler declaration */
ADC_HandleTypeDef    AdcHandle;
/* TIM handler declaration */
static TIM_HandleTypeDef  htim;

/* Variable used to get converted value */
__IO uint16_t uhADCxConvertedValue = 0;

/* Private function prototypes -----------------------------------------------*/
static void SystemClock_Config(void);
static void Error_Handler(void);
static void ADC_Config(void);
static void TIM_Config(void);

/* Private functions ---------------------------------------------------------*/

/**
  * @brief  Main program
  * @param  None
  * @retval None
  */
int main(void)
{
  /* STM32F4xx HAL library initialization:
       - Configure the Flash prefetch, instruction and Data caches
       - Configure the Systick to generate an interrupt each 1 msec
       - Set NVIC Group Priority to 4
       - Global MSP (MCU Support Package) initialization
     */
  HAL_Init();
  /* Configure the system clock to 144 MHz */
  SystemClock_Config();
  
  /* Configure LED3 */
  BSP_LED_Init(LED3);
  
  /*##-1- TIM8 Peripheral Configuration ######################################*/
  TIM_Config();
  
  /*##-2- Configure the ADC3 peripheral ######################################*/
  ADC_Config();
 
  /*##-4- Start the conversion process and enable interrupt ##################*/  
  if(HAL_ADC_Start_IT(&AdcHandle) != HAL_OK)
  {
    /* Start Conversation Error */
    Error_Handler();
  }
  
  /*##-3- TIM8 counter enable ################################################*/ 
  if(HAL_TIM_Base_Start(&htim) != HAL_OK)
  {
    /* Counter Enable Error */
    Error_Handler();
  }
  
  /* Infinite loop */
  while (1)
  {
  }
}

/**
  * @brief  System Clock Configuration
  *         The system Clock is configured as follow : 
  *            System Clock source            = PLL (HSE)
  *            SYSCLK(Hz)                     = 144000000
  *            HCLK(Hz)                       = 144000000
  *            AHB Prescaler                  = 1
  *            APB1 Prescaler                 = 4
  *            APB2 Prescaler                 = 2
  *            HSE Frequency(Hz)              = 25000000
  *            PLL_M                          = 25
  *            PLL_N                          = 288
  *            PLL_P                          = 2
  *            PLL_Q                          = 6
  *            VDD(V)                         = 3.3
  *            Main regulator output voltage  = Scale2 mode
  *            Flash Latency(WS)              = 5
  * @param  None
  * @retval None
  */
static void SystemClock_Config(void)
{
  RCC_ClkInitTypeDef RCC_ClkInitStruct;
  RCC_OscInitTypeDef RCC_OscInitStruct;

  /* Enable Power Control clock */
  __HAL_RCC_PWR_CLK_ENABLE();

  /* The voltage scaling allows optimizing the power consumption when the device is 
     clocked below the maximum system frequency, to update the voltage scaling value 
     regarding system frequency refer to product datasheet.  */
  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);

  /* Enable HSE Oscillator and activate PLL with HSE as source */
  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
  RCC_OscInitStruct.PLL.PLLM = 25;
  RCC_OscInitStruct.PLL.PLLN = 288;
  RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
  RCC_OscInitStruct.PLL.PLLQ = 6;
  HAL_RCC_OscConfig(&RCC_OscInitStruct);
 
  /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 
     clocks dividers */
  RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;  
  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;  
  HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4);
}

/**
  * @brief  This function is executed in case of error occurrence.
  * @param  None
  * @retval None
  */
static void Error_Handler(void)
{
  /* Turn LED3 on */
  BSP_LED_On(LED3);
  while(1)
  {
  }
}

/**
  * @brief  ADC configuration
  * @param  None
  * @retval None
  */
static void ADC_Config(void)
{
  ADC_ChannelConfTypeDef sConfig;
  
   /* ADC Initialization */
  AdcHandle.Instance          = ADCx;
  
  AdcHandle.Init.ClockPrescaler = ADC_CLOCKPRESCALER_PCLK_DIV2;
  AdcHandle.Init.Resolution = ADC_RESOLUTION_12B;
  AdcHandle.Init.ScanConvMode = ENABLE;
  AdcHandle.Init.ContinuousConvMode = ENABLE;
  AdcHandle.Init.DiscontinuousConvMode = DISABLE;
  AdcHandle.Init.NbrOfDiscConversion = 0;
  AdcHandle.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_RISING;
  AdcHandle.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T8_TRGO;
  AdcHandle.Init.DataAlign = ADC_DATAALIGN_RIGHT;
  AdcHandle.Init.NbrOfConversion = 1;
  AdcHandle.Init.DMAContinuousRequests = ENABLE;
  AdcHandle.Init.EOCSelection = ADC_EOC_SEQ_CONV;
      
  if(HAL_ADC_Init(&AdcHandle) != HAL_OK)
  {
    /* ADC Initialization Error */
    Error_Handler();
  }
  
  /* Configure ADC3 regular channel */  
  sConfig.Channel = ADCx_CHANNEL;
  sConfig.Rank = 1;
  sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES;
  sConfig.Offset = 0;
  
  if(HAL_ADC_ConfigChannel(&AdcHandle, &sConfig) != HAL_OK)
  {
    /* Channel Configuration Error */
    Error_Handler();
  }
}

/**
  * @brief  TIM configuration
  * @param  None
  * @retval None
  */
static void TIM_Config(void)
{
  TIM_MasterConfigTypeDef sMasterConfig;
    
  /* Time Base configuration */
  htim.Instance = TIMx;
  
  htim.Init.Period = 0x3C;          
  htim.Init.Prescaler = 0;       
  htim.Init.ClockDivision = 0;    
  htim.Init.CounterMode = TIM_COUNTERMODE_UP;
  htim.Init.RepetitionCounter = 0;
  
  if(HAL_TIM_Base_Init(&htim) != HAL_OK)
  {
    /* TIM8 Initialization Error */
    Error_Handler();
  }
   
  /* TIM8 TRGO selection */
  sMasterConfig.MasterOutputTrigger = TIM_TRGO_UPDATE;
  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
    
  if(HAL_TIMEx_MasterConfigSynchronization(&htim, &sMasterConfig) != HAL_OK)
  {
    /* TIM8 TRGO selection Error */
    Error_Handler();
  }
}

/**
  * @brief  Conversion complete callback in non blocking mode 
  * @param  AdcHandle : AdcHandle handle
  * @note   This example shows a simple way to report end of conversion, and 
  *         you can add your own implementation.    
  * @retval None
  */
void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* AdcHandle)
{
  /* Get the converted value of regular channel */
  uhADCxConvertedValue = HAL_ADC_GetValue(AdcHandle);
}

#ifdef  USE_FULL_ASSERT
/**
  * @brief  Reports the name of the source file and the source line number
  *         where the assert_param error has occurred.
  * @param  file: pointer to the source file name
  * @param  line: assert_param error line source number
  * @retval None
  */
void assert_failed(uint8_t* file, uint32_t line)
{ 
  /* User can add his own implementation to report the file name and line number,
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */

  /* Infinite loop */
  while (1)
  {
  }
}
#endif

/**
  * @}
  */

/**
  * @}
  */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/