Update History
V1.1.2 / 29-December-2017Main Changes - Update stm32f4xx_hal_conf.h files to add support to HAL CAN Legacy Module.
V1.1.1 / 06-October-2017Main Changes - Remove DATE and VERSION from the header of all the files.
- Remove support of TrueSTUDIO toolchain
V1.1.0
/ 17-February-2017
Main Changes
- Update BSP example to be aligned with latest HAL SD and BSP SD drivers implementation
- Update DMA_FLASHToRAM example to use FIFO mode instead of direct mode for memory to memory transfer
V1.0.2
/ 06-May-2016
Main Changes
- Add new define
USE_SPI_CRC in stm32f4xx_hal_conf.h file for code cleanup when the CRC
calculation is disabled
- Add 2 new HAL TimeBase examples : HAL_TimeBase_RTC_ALARM and HAL_TimeBase_RTC_WKUP
- Update HAL_TimeBase example to use TIM HW as
time
base source instead of Systick
- Update DMA_FLASHToRAM example to use
HAL_DMA_RegisterCallback() function
- Update PWR_CurrentConsumption
example as follow
- Configure missing GPIO Ports as analog
mode
for sleep and stop modes
- Add the case of under-drive mode to achieve the
lowest possible current consumption
- Update IWDG example
to be inline with latest updates done on HAL IWDG drivers
- Remove the HAL_IWDG_Start function in the
main.c
file
- Update WWDG examples to be in line with latest
updates done on HAL WWDG drivers
- Remove the HAL_WWDG_Start and update the
HAL_WWDG_Refresh functions in the main.c file
- Remove HAL_WWDG_MspDeInit function from
stm32f4xx_hal_msp.c file
V1.0.1
/ 29-January-2016
Main
Changes
- stm32f4xx_hal_conf.h
- Adjust the HSE Start-up Timeout value:
100ms instead of 5s
- Add new define for the LSE start-up
Timeout: LSE_STARTUP_TIMEOUT
- HAL_TimeBase
- Update to use new HAL TimeBase
driver template stm32xxx_hal_timebase_time.c
- RCC_ClockConfig
- Alignment with STM32F4xx_HAL_Driver V1.4.4:
update to use the new define for the HSI calibration default value.
V1.0.0
/ 13-November-2015
Main
Changes
License
Redistribution
and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:
- Redistributions
of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
- Redistributions
in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
- Neither the
name of STMicroelectronics nor the names of its contributors may be
used to endorse or promote products derived
from this software without specific prior written permission.
THIS
SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGE.
For
complete documentation on STM32 Microcontrollers visit www.st.com/STM32
|
