Back to Release page

Release Notes for STM32469I_Discovery Applications

Copyright 2017 STMicroelectronics

 

Update History

V1.5.0 / 26-October-2018

Main Changes

  • Fix warnings generated with version v 2.6 of SW4STM32
  • Update STemWin EWARM Projects to be compliant with IARv8.x
  • Update STemWin applications with new STemWin libraries
  • Update projects with new PDM V3.1.0 lib
  • Fix misalignement on USB_Device projects with MDK-ARM

V1.3.0 / 02-February-2018

Main Changes

  • Add STemWin applications:
    • STemWin_Acceleration
    • STemWin_Animation
    • STemWin_Fonts
    • STemWin_MemoryDevice

V1.2.1 / 29-December-2017

Main Changes

  • Update stm32f4xx_hal_conf.h files to add support to HAL CAN Legacy Module.

V1.2.0 /  06-October-2017

Main Changes

  • Fix compilation issues with Linux
  • Upgrade STemWin applications from 5.32 to 5.40
  • Update applications based on FatFS stack to use new fatfs release 0.12c
  • Add new FreeRTOS application : FreeRTOS_MPU project
  • Update encode.c under LibJPEG_Encoding application : BMP header is not always 54 bytes

V1.1.0 / 17-February-2017

Main Changes

  • General applications projects update to be aligned with new HAL SD and BSP Drivers implementation
  • Update almost applications to support latest version of FatFS middleware
  • Update overall applications to add the support of the external memories in system_stm32f4xx.c files
  • Update LibJPEG applications to be aligned with latest LibJPEG Libraries
  • Update Display and StemWin Applications to use __HAL_LTDC_RELOAD_CONFIG() macro instead of  __HAL_LTDC_IMMEDIATE_CONFIG() macro
  • Update stm32f4xx_hal_conf.h file in overall applications to remove unnecessary ETH PHY configuration
  • Update StemWin_SampleDemo application to remove unused STemWin demonstration modules
  • USB_Host/FWUpgrade_Standalone
    • Update to support non 32-bits aligned firmware binaries
  • USB_Host/HID_RTOS and HID_Standalone: update application for implementation enhancement

V1.0.6 / 04-November-2016

Main Changes

  • Update system_stm32f4xx.c file in all projects to be aligned with latest version of CMSIS STM32F4xx device implementation
  • Update USB_Device/HID_LPM_Standalone application to fix BOS descriptor

V1.0.5 / 03-June-2016

Main Changes

  • Update applications related to STemWin library to support STemWin 5.32 version

V1.0.4 / 06-May-2016

     Main Changes
  • Add new define USE_SPI_CRC in stm32f4xx_hal_conf.h file for code cleanup when the CRC calculation is disabled 
  • Update applications using DMA2D peripheral with new color definition
  • Update applications using FreeRTOS to use TIM HW as time base source
  • Enhance state machine of Audio_playback_and_record application
  • usbh_conf.c
    • Remove adding delay in the HAL_HCD_Connect_Callback()
  • Fix encoded JPEG file color and orientation for LibJPEG_Encoding application
  • Update STemWin applications to use the DSI peripheral in command mode in order to avoid tearing effect and diagonal effect

V1.0.3 / 29-January-2016

     Main Changes
  • stm32f4xx_hal_conf.h
    • Adjust the HSE Start-up Timeout value: 100ms instead of 5s
    • Add new define for the LSE start-up Timeout: LSE_STARTUP_TIMEOUT

  • STemWin_SampleDemo

    • Update to get bigger buttons size and to remove the calibration check at the launching of the application

  • USB_HOST\HID_Standalone

    • Correct a misbehavior of the backspace key 

V1.0.2 / 13-November-2015

Main Changes

  • Add new application: EEPROM_Emulation 
  • Fix Copy rectangle function implementation in all projects using STemWin library

V1.0.1 / 09-October-2015

Main Changes

  • Update SW4STM32 projects
    • Fix in accordance with latest version of SW4STM32 toolchain
  • Update LCD clock configuration in the LCD_DSI_ImageSlider application.

V1.0.0 / 14-August-2015

Main Changes

  • First official release

License

Redistribution and use in source and binary forms, with or without modification, are permitted, provided that the following conditions are met:
  1. Redistribution of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
  3. Neither the name of STMicroelectronics nor the names of other contributors to this software may be used to endorse or promote products derived from this software without specific written permission.
  4. This software, including modifications and/or derivative works of this software, must execute solely and exclusively on microcontroller or microprocessor devices manufactured by or for STMicroelectronics.
  5. Redistribution and use of this software other than as permitted under this license is void and will automatically terminate your rights under this license.

THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

For complete documentation on STM32 Microcontrollers visit www.st.com/STM32