Back to Release page

Release Notes for STM32446E_EVAL Examples

Copyright 2017 STMicroelectronics

 

Update History

V1.2.2 / 29-December-2017

Main Changes

  • Update CAN examples to be aligned to the new HAL CAN driver.
  • Update CAN examples to set a fixed bitrate equal to 1 Mbit/s.
  • Update stm32f4xx_hal_conf.h files to add support to HAL CAN Legacy Module.

V1.2.1 / 06-October-2017

Main Changes

  • Remove DATE and VERSION from the header of all the files.
  • Remove support of TrueSTUDIO toolchain
  • Update to integrate PDM2PCM lib V3.0.0
  • Update RTC  examples to reset handle RTC state when initializing:
    • main.c:  Add a call for HAL_RTC_RESET_HANDLE_STATE()

V1.2.0 / 17-February-2017

      Main Changes
  • Update BSP example to be aligned with latest HAL SD and BSP SD drivers implementation
  • Update DMA_FLASHToRAM example to use FIFO mode instead of direct mode for memory to memory transfer
  • Update stm32f4xx_hal_conf.h file in overall examples to remove unnecessary ETH PHY configuration
  • Update overall examples to add the support of the external memories in system_stm32f4xx.c files
  • Upate QSPI configuration in system_stm32f4xx.c file for QSPI_PreInitConfig example

V1.1.5 / 04-November-2016

      Main Changes
  • Update system_stm32f4xx.c file in all projects to be aligned with latest version of CMSIS STM32F4xx device implementation

V1.1.4 / 06-May-2016

      Main Changes
  • Add new define USE_SPI_CRC in stm32f4xx_hal_conf.h file for code cleanup when the CRC calculation is disabled 
  • Add new example QSPI_PreInitConfig allowing to execute a part of the code from the QSPI memory
  • Add two new time base examples
  • Update HAL_TimeBase example to use TIM HW as time base source instead of Systick
  • Update FLASH_EraseProgram example to cover all flash sectors
  • Update CEC examples to be align with the new HAL CEC driver
  • Update WWDG examples to be in line with latest updates done on HAL WWDG drivers
    • Remove the HAL_WWDG_Start and update the HAL_WWDG_Refresh functions in the main.c file
    • Remove HAL_WWDG_MspDeInit function from stm32f4xx_hal_msp.c file
  • Update IWDG example to be in line with latest updates done on HAL IWDG drivers
    • Remove the HAL_IWDG_Start function in the main.c file
  • Rework FMPI2C_EEPROM example after latest update on HAL FMPI2C driver
  • Update QSPI_ExecuteInPlace example to manage QSPI peripheral errors during DMA process
  • Update PWR_STOP example by adding the case of under-drive mode in order to achieve the lowest possible current consumption
  • Update DMA_FLASHToRAM example to use HAL_DMA_RegisterCallback() function

V1.1.3 / 29-January-2016

      Main Changes
  • stm32f4xx_hal_conf.h
    • Adjust the HSE Start-up Timeout value: 100ms instead of 5s
    • Add new define for the LSE start-up Timeout: LSE_STARTUP_TIMEOUT
  • HAL_TimeBase
    • Update to use new HAL TimeBase driver template stm32xxx_hal_timebase_time.c
  • RCC_ClockConfig
    • Alignment with STM32F4xx_HAL_Driver V1.4.4: update to use the new define for the HSI calibration default value

V1.1.2 / 13-November-2015

Main Changes

  • ADC_RegularConversion_DMA example: update RCC configuration 
  • ADC_TripleModeInterleaved: update RCC configuration to reach max ADC input clock 36MHz
  • TIM_InputCapture example: fix wrong calculation of the measured frequency

V1.1.1 / 09-October-2015

Main Changes

  • Update SW4STM32 projects
    • Fix in accordance with latest version of SW4STM32 toolchain

V1.1.0 / 01-July-2015

Main Changes

  • update system_stm32f4xx.c to properly configure external SDRAM
  • add the support of SW4STM32 toolchain

V1.0.0 / 13-March-2015

Main Changes

  • First official release 

License

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
  1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
  3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived
       from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

For complete documentation on STM32 Microcontrollers visit www.st.com/STM32