Update HistoryV1.0.6 / 29-December-2017Main Changes - Update stm32f4xx_hal_conf.h files to add support to HAL CAN Legacy Module.
V1.0.5 / 06-October-2017Main Changes - Remove DATE and VERSION from the header of all the files.
- Remove support of TrueSTUDIO toolchain
- Update RTC examples to reset handle RTC state when initializing:
- main.c: Add a call for HAL_RTC_RESET_HANDLE_STATE()
V1.0.4 / 17-February-2017
Main Changes
- Update stm32f4xx_hal_conf.h file in overall examples to remove unnecessary ETH PHY configuration
V1.0.3 / 06-May-2016
Main Changes
- Add new define USE_SPI_CRC in stm32f4xx_hal_conf.h
file for code cleanup when the CRC calculation is disabled
- Update I2C_TwoBoards_ComDMA example as
follows
- Configure and enable the SPI IRQ in HAL_I2C_MspInit()
function
- In stm32f4xx_it.c file, I2C_IRQHandler() function: add
a call to HAL_I2C_IRQHandler() function
- Rework I2C_TwoBoards_AdvComIT and I2C_TwoBoards_ComIT
examples following changes in latest HAL version
- Update to allow master to restart communication when slave doesn't
acknowledge its address
- Add two new time base examples
- Update HAL_TimeBase example to use TIM HW as time base
source instead of Systick
- Update PWR_CurrentConsumption example as follows
- Configure missing GPIO Ports as analog mode for
sleep and stop modes
- Add the case of under-drive mode to achieve the lowest
possible current consumption
V1.0.2 / 29-January-2016
Main Changes
- stm32f4xx_hal_conf.h
- Adjust the HSE Start-up Timeout value:
100ms instead of 5s
- Add new define for the LSE start-up
Timeout: LSE_STARTUP_TIMEOUT
- HAL_TimeBase
- Update to use new HAL TimeBase
driver template stm32xxx_hal_timebase_time.c
- RCC_ClockConfig
- Alignment
with STM32F4xx_HAL_Driver V1.4.4: update to use the new define for the
HSI calibration default value.
V1.0.1 / 09-October-2015
Main Changes
- Update SW4STM32 projects
- Fix in accordance with latest version of SW4STM32 toolchain
V1.0.0 / 01-July-2015
Main Changes
For
complete documentation on STM32
Microcontrollers visit www.st.com/STM32
|