Back to Release page

Release Notes for STM32F411E-Discovery Examples

Copyright 2017 STMicroelectronics

 

Update History

V1.1.0 / 26-October-2018

Main Changes

  • Update projects with new PDM V3.1.0 lib

V1.0.6 / 29-December-2017

Main Changes

  • Update stm32f4xx_hal_conf.h files to add support to HAL CAN Legacy Module.

V1.0.5 / 06-October-2017

Main Changes

  • Remove DATE and VERSION from the header of all the files.
  • Remove support of TrueSTUDIO toolchain

V1.0.4 / 17-February-2017

Main Changes 

  • Update stm32f4xx_hal_conf.h file to remove unnecessary ETH PHY configuration
  • Update system_stm32f4xx.c file to add missing APBPrescTable[8] table and to remove unnecessary external memory configuration
  • Update DMA_FLASHToRAM example to use FIFO mode instead of direct mode for memory to memory transfer
  • Update I2C_TwoBoards_RestartAdvComIT example to properly manage the AF error case

V1.0.3 / 04-November-2016

Main Changes 

  • Update system_stm32f4xx.c file in all projects to be aligned with latest version of CMSIS STM32F4xx device implementation

V1.0.2 / 06-May-2016

Main Changes 

  • Add new define USE_SPI_CRC in stm32f4xx_hal_conf.h file for code cleanup when the CRC calculation is disabled.
  • Add 2 new HAL TimeBase examples : HAL_TimeBase_RTC_ALARM and HAL_TimeBase_RTC_WKUP
  • Update HAL_TimeBase example to use TIM HW as time base source instead of Systick
  • Update I2C_TwoBoards_ComDMA example to be inline with new HAL I2C DMA model :
    • Configure and enable the I2C IRQ in HAL_I2C_MspInit() function

    • In stm32f4xx_it.c file, I2C_IRQHandler() function: add a call to HAL_I2C_IRQHandler() function

  • Rework I2C_TwoBoards_AdvComIT and I2C_TwoBoards_ComIT examples following changes in latest HAL version
    • Update to allow master to restart communication when slave doesn't acknowledge its address
  • Update SPI DMA example to manage SPI peripheral errors during DMA process
  • Update DMA_FLASHToRAM example to use HAL_DMA_RegisterCallback() function

  • Update FLASH_EraseProgram example to cover all flash sectors

V1.0.1 / 29-January-2016

      Main Changes
  • stm32f4xx_hal_conf.h 
    • Adjust the HSE Start-up Timeout value: 100ms instead of 5s 
    • Add new define for the LSE start-up Timeout: LSE_STARTUP_TIMEOUT 
  • HAL_TimeBase 
    • Update to use new HAL TimeBase driver template stm32xxx_hal_timebase_time.c 
  • RCC_ClockConfig
    • Alignment with STM32F4xx_HAL_Driver V1.4.4: update to use the new define for the HSI calibration default value
  • Add 2 new I2C examples to explore the repeat start feature: I2C_TwoBoards_RestartAdvComIT and I2C_TwoBoards_RestartComIT

V1.0.0 / 13-November-2015

Main Changes

  • First official release

License

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
  1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
  3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived
       from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

For complete documentation on STM32 Microcontrollers visit www.st.com/STM32