STM32CubeF4/Projects/STM32F413H-Discovery/Examples/QSPI/QSPI_ReadWrite_IT/Src/main.c

/**
  ******************************************************************************
  * @file    QSPI/QSPI_ReadWrite_IT/Src/main.c
  * @author  MCD Application Team
  * @brief   This example describes how to configure and use QuadSPI through
  *          the STM32F4xx HAL API.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
  * All rights reserved.</center></h2>
  *
  * This software component is licensed by ST under BSD 3-Clause license,
  * the "License"; You may not use this file except in compliance with the
  * License. You may obtain a copy of the License at:
  *                        opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  */

/* Includes ------------------------------------------------------------------*/
#include "main.h"

/** @addtogroup STM32F4xx_HAL_Examples
  * @{
  */

/** @addtogroup QSPI_ReadWrite_IT
  * @{
  */

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
QSPI_HandleTypeDef QSPIHandle;
__IO uint8_t CmdCplt, RxCplt, TxCplt, StatusMatch, TimeOut;

/* Buffer used for transmission */
uint8_t aTxBuffer[] = " ****QSPI communication based on IT****  ****QSPI communication based on IT****  ****QSPI communication based on IT****  ****QSPI communication based on IT****  ****QSPI communication based on IT****  ****QSPI communication based on IT**** ";

/* Buffer used for reception */
uint8_t aRxBuffer[BUFFERSIZE];

/* Private function prototypes -----------------------------------------------*/
static void SystemClock_Config(void);
static void Error_Handler(void);
static void QSPI_WriteEnable(QSPI_HandleTypeDef *hqspi);
static void QSPI_AutoPollingMemReady(QSPI_HandleTypeDef *hqspi);
static void QSPI_DummyCyclesCfg(QSPI_HandleTypeDef *hqspi);
/* Private functions ---------------------------------------------------------*/

/**
  * @brief  Main program
  * @param  None
  * @retval None
  */
int main(void)
{
  QSPI_CommandTypeDef sCommand;
  uint32_t address = 0;
  uint16_t index;
  __IO uint8_t step = 0;

  
  /* STM32F4xx HAL library initialization:
       - Configure the Flash prefetch
       - Systick timer is configured by default as source of time base, but user 
         can eventually implement his proper time base source (a general purpose 
         timer for example or other time source), keeping in mind that Time base 
         duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and 
         handled in milliseconds basis.
       - Set NVIC Group Priority to 4
       - Low Level Initialization
     */
  HAL_Init();

  /* Configure the system clock to 100 MHz */
  SystemClock_Config();

  BSP_LED_Init(LED3);
  BSP_LED_Init(LED4);
  
  /* Initialize QuadSPI ------------------------------------------------------ */
  QSPIHandle.Instance = QUADSPI;
  HAL_QSPI_DeInit(&QSPIHandle);
        
  QSPIHandle.Init.ClockPrescaler     = 0;
  QSPIHandle.Init.FifoThreshold      = 4;
  QSPIHandle.Init.SampleShifting     = QSPI_SAMPLE_SHIFTING_HALFCYCLE;
  QSPIHandle.Init.FlashSize          = QSPI_FLASH_SIZE;
  QSPIHandle.Init.ChipSelectHighTime = QSPI_CS_HIGH_TIME_2_CYCLE;
  QSPIHandle.Init.ClockMode          = QSPI_CLOCK_MODE_0;
  QSPIHandle.Init.FlashID            = QSPI_FLASH_ID_1;
  QSPIHandle.Init.DualFlash          = QSPI_DUALFLASH_DISABLE;

  if (HAL_QSPI_Init(&QSPIHandle) != HAL_OK)
  {
    Error_Handler();
  }

  sCommand.InstructionMode   = QSPI_INSTRUCTION_1_LINE;
  sCommand.AddressSize       = QSPI_ADDRESS_24_BITS;
  sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE;
  sCommand.DdrMode           = QSPI_DDR_MODE_DISABLE;
  sCommand.DdrHoldHalfCycle  = QSPI_DDR_HHC_ANALOG_DELAY;
  sCommand.SIOOMode          = QSPI_SIOO_INST_EVERY_CMD;

  while(1)
  {
    switch(step)
    {
      case 0:
        CmdCplt = 0;
        
        /* Initialize Reception buffer --------------------------------------- */
        for (index = 0; index < BUFFERSIZE; index++)
        {
          aRxBuffer[index] = 0;
        }

        /* Enable write operations ------------------------------------------- */
        QSPI_WriteEnable(&QSPIHandle);

        /* Erasing Sequence -------------------------------------------------- */
        sCommand.Instruction = SECTOR_ERASE_CMD;
        sCommand.AddressMode = QSPI_ADDRESS_1_LINE;
        sCommand.Address     = address;
        sCommand.DataMode    = QSPI_DATA_NONE;
        sCommand.DummyCycles = 0;

        if (HAL_QSPI_Command_IT(&QSPIHandle, &sCommand) != HAL_OK)
        {
          Error_Handler();
        }

        step++;
        break;

      case 1:
        if(CmdCplt != 0)
        {
          CmdCplt = 0;
          StatusMatch = 0;

          /* Configure automatic polling mode to wait for end of erase ------- */  
          QSPI_AutoPollingMemReady(&QSPIHandle);

          step++;
        }
        break;
        
      case 2:
        if(StatusMatch != 0)
        {
          StatusMatch = 0;
          TxCplt = 0;
          
          /* Enable write operations ----------------------------------------- */
          QSPI_WriteEnable(&QSPIHandle);

          /* Writing Sequence ------------------------------------------------ */
          sCommand.Instruction = EXT_QUAD_IN_FAST_PROG_CMD;
          sCommand.AddressMode = QSPI_ADDRESS_4_LINES;
          sCommand.DataMode    = QSPI_DATA_4_LINES;
          sCommand.NbData      = BUFFERSIZE;

          if (HAL_QSPI_Command(&QSPIHandle, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
          {
            Error_Handler();
          }

          if (HAL_QSPI_Transmit_IT(&QSPIHandle, aTxBuffer) != HAL_OK)
          {
            Error_Handler();
          }

          step++;
        }
        break;

      case 3:
        if(TxCplt != 0)
        {
          TxCplt = 0;
          StatusMatch = 0;

          /* Configure automatic polling mode to wait for end of program ----- */  
          QSPI_AutoPollingMemReady(&QSPIHandle);
        
          step++;
        }
        break;
        
      case 4:
        if(StatusMatch != 0)
        {
          StatusMatch = 0;
          RxCplt = 0;

          /* Configure Volatile Configuration register (with new dummy cycles) */
          QSPI_DummyCyclesCfg(&QSPIHandle);
          
          /* Reading Sequence ------------------------------------------------ */
          sCommand.Instruction = QUAD_INOUT_FAST_READ_CMD;
          sCommand.DummyCycles = DUMMY_CLOCK_CYCLES_READ_QUAD;

          if (HAL_QSPI_Command(&QSPIHandle, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
          {
            Error_Handler();
          }

          if (HAL_QSPI_Receive_IT(&QSPIHandle, aRxBuffer) != HAL_OK)
          {
            Error_Handler();
          }
          step++;
        }
        break;
        
      case 5:
        if (RxCplt != 0)
        {
          RxCplt = 0;

          /* Result comparison ----------------------------------------------- */
          for (index = 0; index < BUFFERSIZE; index++)
          {
            if (aRxBuffer[index] != aTxBuffer[index])
            {
              BSP_LED_On(LED4);
            }
          }
          BSP_LED_Toggle(LED3);

          address += QSPI_PAGE_SIZE;
          if(address >= QSPI_END_ADDR)
          {
            address = 0;
          }
          step = 0;
        }
        break;
        
      default :
        Error_Handler();
    }
  }
}

/**
  * @brief  Command completed callbacks.
  * @param  hqspi: QSPI handle
  * @retval None
  */
void HAL_QSPI_CmdCpltCallback(QSPI_HandleTypeDef *hqspi)
{
  CmdCplt++;
}

/**
  * @brief  Rx Transfer completed callbacks.
  * @param  hqspi: QSPI handle
  * @retval None
  */
void HAL_QSPI_RxCpltCallback(QSPI_HandleTypeDef *hqspi)
{
  RxCplt++;
}

/**
  * @brief  Tx Transfer completed callbacks.
  * @param  hqspi: QSPI handle
  * @retval None
  */
void HAL_QSPI_TxCpltCallback(QSPI_HandleTypeDef *hqspi)
{
  TxCplt++; 
}

/**
  * @brief  Status Match callbacks
  * @param  hqspi: QSPI handle
  * @retval None
  */
void HAL_QSPI_StatusMatchCallback(QSPI_HandleTypeDef *hqspi)
{
  StatusMatch++;
}

/**
  * @brief  System Clock Configuration
  *         The system Clock is configured as follow : 
  *            System Clock source            = PLL (HSE)
  *            SYSCLK(Hz)                     = 100000000
  *            HCLK(Hz)                       = 100000000
  *            AHB Prescaler                  = 1
  *            APB1 Prescaler                 = 2
  *            APB2 Prescaler                 = 1
  *            HSE Frequency(Hz)              = 8000000
  *            PLL_M                          = 8
  *            PLL_N                          = 200
  *            PLL_P                          = 2
  *            PLL_Q                          = 7
  *            PLL_R                          = 2
  *            VDD(V)                         = 3.3
  *            Main regulator output voltage  = Scale1 mode
  *            Flash Latency(WS)              = 3
  * @param  None
  * @retval None
  */
static void SystemClock_Config(void)
{
  RCC_ClkInitTypeDef RCC_ClkInitStruct;
  RCC_OscInitTypeDef RCC_OscInitStruct;
  HAL_StatusTypeDef ret = HAL_OK;

  /* Enable Power Control clock */
  __HAL_RCC_PWR_CLK_ENABLE();

  /* The voltage scaling allows optimizing the power consumption when the device is 
     clocked below the maximum system frequency, to update the voltage scaling value 
     regarding system frequency refer to product datasheet.  */
  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);

  /* Enable HSE Oscillator and activate PLL with HSE as source */
  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
  RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS;
  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
  RCC_OscInitStruct.PLL.PLLM = 8;
  RCC_OscInitStruct.PLL.PLLN = 200;
  RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
  RCC_OscInitStruct.PLL.PLLQ = 7;
  RCC_OscInitStruct.PLL.PLLR = 2;
  ret = HAL_RCC_OscConfig(&RCC_OscInitStruct);
  
  if(ret != HAL_OK)
  {
    while(1) { ; } 
  }

  /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 
     clocks dividers */
  RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;  
  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;  
  ret = HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3);
  if(ret != HAL_OK)
  {
    while(1) { ; }  
  }
}

/**
  * @brief  This function send a Write Enable and wait it is effective.
  * @param  hqspi: QSPI handle
  * @retval None
  */
static void QSPI_WriteEnable(QSPI_HandleTypeDef *hqspi)
{
  QSPI_CommandTypeDef     sCommand;
  QSPI_AutoPollingTypeDef sConfig;

  /* Enable write operations ------------------------------------------ */
  sCommand.InstructionMode   = QSPI_INSTRUCTION_1_LINE;
  sCommand.Instruction       = WRITE_ENABLE_CMD;
  sCommand.AddressMode       = QSPI_ADDRESS_NONE;
  sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE;
  sCommand.DataMode          = QSPI_DATA_NONE;
  sCommand.DummyCycles       = 0;
  sCommand.DdrMode           = QSPI_DDR_MODE_DISABLE;
  sCommand.DdrHoldHalfCycle  = QSPI_DDR_HHC_ANALOG_DELAY;
  sCommand.SIOOMode          = QSPI_SIOO_INST_EVERY_CMD;

  if (HAL_QSPI_Command(&QSPIHandle, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
  {
    Error_Handler();
  }
  
  /* Configure automatic polling mode to wait for write enabling ---- */  
  sConfig.Match           = 0x02;
  sConfig.Mask            = 0x02;
  sConfig.MatchMode       = QSPI_MATCH_MODE_AND;
  sConfig.StatusBytesSize = 1;
  sConfig.Interval        = 0x10;
  sConfig.AutomaticStop   = QSPI_AUTOMATIC_STOP_ENABLE;

  sCommand.Instruction    = READ_STATUS_REG_CMD;
  sCommand.DataMode       = QSPI_DATA_1_LINE;

  if (HAL_QSPI_AutoPolling(&QSPIHandle, &sCommand, &sConfig, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
  {
    Error_Handler();
  }
}

/**
  * @brief  This function read the SR of the memory and wait the EOP.
  * @param  hqspi: QSPI handle
  * @retval None
  */
static void QSPI_AutoPollingMemReady(QSPI_HandleTypeDef *hqspi)
{
  QSPI_CommandTypeDef     sCommand;
  QSPI_AutoPollingTypeDef sConfig;

  /* Configure automatic polling mode to wait for memory ready ------ */  
  sCommand.InstructionMode   = QSPI_INSTRUCTION_1_LINE;
  sCommand.Instruction       = READ_STATUS_REG_CMD;
  sCommand.AddressMode       = QSPI_ADDRESS_NONE;
  sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE;
  sCommand.DataMode          = QSPI_DATA_1_LINE;
  sCommand.DummyCycles       = 0;
  sCommand.DdrMode           = QSPI_DDR_MODE_DISABLE;
  sCommand.DdrHoldHalfCycle  = QSPI_DDR_HHC_ANALOG_DELAY;
  sCommand.SIOOMode          = QSPI_SIOO_INST_EVERY_CMD;

  sConfig.Match           = 0x00;
  sConfig.Mask            = 0x01;
  sConfig.MatchMode       = QSPI_MATCH_MODE_AND;
  sConfig.StatusBytesSize = 1;
  sConfig.Interval        = 0x10;
  sConfig.AutomaticStop   = QSPI_AUTOMATIC_STOP_ENABLE;

  if (HAL_QSPI_AutoPolling_IT(&QSPIHandle, &sCommand, &sConfig) != HAL_OK)
  {
    Error_Handler();
  }
}

/**
  * @brief  This function configure the dummy cycles on memory side.
  * @param  hqspi: QSPI handle
  * @retval None
  */
static void QSPI_DummyCyclesCfg(QSPI_HandleTypeDef *hqspi)
{
  QSPI_CommandTypeDef sCommand;
  uint8_t reg;

  /* Read Volatile Configuration register --------------------------- */
  sCommand.InstructionMode   = QSPI_INSTRUCTION_1_LINE;
  sCommand.Instruction       = READ_VOL_CFG_REG_CMD;
  sCommand.AddressMode       = QSPI_ADDRESS_NONE;
  sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE;
  sCommand.DataMode          = QSPI_DATA_1_LINE;
  sCommand.DummyCycles       = 0;
  sCommand.DdrMode           = QSPI_DDR_MODE_DISABLE;
  sCommand.DdrHoldHalfCycle  = QSPI_DDR_HHC_ANALOG_DELAY;
  sCommand.SIOOMode          = QSPI_SIOO_INST_EVERY_CMD;
  sCommand.NbData            = 1;

  if (HAL_QSPI_Command(&QSPIHandle, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
  {
    Error_Handler();
  }

  if (HAL_QSPI_Receive(&QSPIHandle, &reg, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
  {
    Error_Handler();
  }

  /* Enable write operations ---------------------------------------- */
  QSPI_WriteEnable(&QSPIHandle);

  /* Write Volatile Configuration register (with new dummy cycles) -- */  
  sCommand.Instruction = WRITE_VOL_CFG_REG_CMD;
  MODIFY_REG(reg, 0xF0, (DUMMY_CLOCK_CYCLES_READ_QUAD << POSITION_VAL(0xF0)));
      
  if (HAL_QSPI_Command(&QSPIHandle, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
  {
    Error_Handler();
  }

  if (HAL_QSPI_Transmit(&QSPIHandle, &reg, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
  {
    Error_Handler();
  }
}


/**
  * @brief  This function is executed in case of error occurrence.
  * @param  None
  * @retval None
  */
static void Error_Handler(void)
{
  BSP_LED_On(LED4);

  /* User may add here some code to deal with this error */
  while(1)
  {
    HAL_Delay(100);
    BSP_LED_Toggle(LED4);
  }
}

#ifdef  USE_FULL_ASSERT
/**
  * @brief  Reports the name of the source file and the source line number
  *         where the assert_param error has occurred.
  * @param  file: pointer to the source file name
  * @param  line: assert_param error line source number
  * @retval None
  */
void assert_failed(uint8_t *file, uint32_t line)
{
  /* User can add his own implementation to report the file name and line number,
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */

  /* Infinite loop */
  while (1)
  {
  }
}
#endif

/**
  * @}
  */

/**
  * @}
  */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/