OrgST-Microelectronics/STM32CubeF3
1
0
Fork 0
mirror of https://github.com/STMicroelectronics/STM32CubeF3.git synced 2025-05-01 22:18:23 +08:00
Code Issues Releases Wiki Activity
STM32CubeF3/Drivers/BSP/STM32303E_EVAL/stm32303e_eval.h
Ali Labbene e684e8712c Release v1.10.0
2019-07-15 15:37:15 +01:00

491 lines
18 KiB
C
Raw Blame History

/**
******************************************************************************
* @file stm32303e_eval.h
* @author MCD Application Team
* @brief This file contains definitions for STM32303E_EVAL's LEDs,
* push-buttons and COM ports hardware resources.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32303E_EVAL_H
#define __STM32303E_EVAL_H
#ifdef __cplusplus
extern "C" {
#endif
/** @addtogroup BSP
* @{
*/
/** @defgroup STM32303E_EVAL STM32303E-EVAL
* @{
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f3xx_hal.h"
/** @defgroup STM32303E_EVAL_Common STM32303E-EVAL Common
* @{
*/
/** @defgroup STM32303E_EVAL_Private_Constants Private Constants
* @{
*/
/**
* @}
*/
/** @defgroup STM32303E_EVAL_Private_Variables Private Variables
* @{
*/
/**
* @}
*/
/** @defgroup STM32303E_EVAL_Exported_Types Exported Types
* @{
*/
/**
* @brief LED Types Definition
*/
typedef enum
{
LED1 = 0,
LED2 = 1,
LED3 = 2,
LED4 = 3,
LED_GREEN = LED1,
LED_ORANGE = LED2,
LED_RED = LED3,
LED_BLUE = LED4
}Led_TypeDef;
/**
* @brief BUTTON Types Definition
*/
typedef enum
{
BUTTON_KEY = 0,
BUTTON_SEL = 1,
BUTTON_LEFT = 2,
BUTTON_RIGHT = 3,
BUTTON_DOWN = 4,
BUTTON_UP = 5
}Button_TypeDef;
typedef enum
{
BUTTON_MODE_GPIO = 0,
BUTTON_MODE_EXTI = 1
}ButtonMode_TypeDef;
/**
* @brief JOYSTICK Types Definition
*/
typedef enum
{
JOY_SEL = 0,
JOY_LEFT = 1,
JOY_RIGHT = 2,
JOY_DOWN = 3,
JOY_UP = 4,
JOY_NONE = 5
}JOYState_TypeDef;
typedef enum
{
JOY_MODE_GPIO = 0,
JOY_MODE_EXTI = 1
}JOYMode_TypeDef;
/**
* @brief COM Types Definition
*/
typedef enum
{
COM1 = 0
}COM_TypeDef;
/**
* @}
*/
/** @defgroup STM32303E_EVAL_Exported_Constants Exported Constants
* @{
*/
/**
* @brief Define for STM32303E_EVAL board
*/
#if !defined (USE_STM32303E_EVAL)
#define USE_STM32303E_EVAL
#endif
/** @defgroup STM32303E_EVAL_LED STM32303E-EVAL LED
* @{
*/
#define LEDn 4
#define LED1_PIN GPIO_PIN_8
#define LED1_GPIO_PORT GPIOE
#define LED1_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE()
#define LED1_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE()
#define LED2_PIN GPIO_PIN_9
#define LED2_GPIO_PORT GPIOE
#define LED2_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE()
#define LED2_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE()
#define LED3_PIN GPIO_PIN_10
#define LED3_GPIO_PORT GPIOE
#define LED3_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE()
#define LED3_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE()
#define LED4_PIN GPIO_PIN_11
#define LED4_GPIO_PORT GPIOE
#define LED4_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE()
#define LED4_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE()
#define LEDx_GPIO_CLK_ENABLE(__LED__) do { if ((__LED__) == LED1) LED1_GPIO_CLK_ENABLE(); else\
if ((__LED__) == LED2) LED2_GPIO_CLK_ENABLE(); else\
if ((__LED__) == LED3) LED3_GPIO_CLK_ENABLE(); else\
if ((__LED__) == LED4) LED4_GPIO_CLK_ENABLE();} while(0)
#define LEDx_GPIO_CLK_DISABLE(__LED__) (((__LED__) == LED1) ? LED1_GPIO_CLK_DISABLE() :\
((__LED__) == LED2) ? LED2_GPIO_CLK_DISABLE() :\
((__LED__) == LED3) ? LED3_GPIO_CLK_DISABLE() :\
((__LED__) == LED4) ? LED4_GPIO_CLK_DISABLE() : 0 )
/**
* @}
*/
/** @defgroup STM32303E_EVAL_BUTTON STM32303E-EVAL BUTTON
* @{
*/
#define JOYn 5
#define BUTTONn 1 + JOYn
/**
* @brief Key push-button
*/
#define KEY_BUTTON_PIN GPIO_PIN_6
#define KEY_BUTTON_GPIO_PORT GPIOE
#define KEY_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE()
#define KEY_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE()
#define KEY_BUTTON_EXTI_IRQn EXTI9_5_IRQn
/**
* @brief Joystick Right push-button
*/
#define RIGHT_JOY_PIN GPIO_PIN_6
#define RIGHT_JOY_GPIO_PORT GPIOD
#define RIGHT_JOY_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE()
#define RIGHT_JOY_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE()
#define RIGHT_JOY_EXTI_IRQn EXTI9_5_IRQn
/**
* @brief Joystick Left push-button
*/
#define LEFT_JOY_PIN GPIO_PIN_5
#define LEFT_JOY_GPIO_PORT GPIOB
#define LEFT_JOY_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
#define LEFT_JOY_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
#define LEFT_JOY_EXTI_IRQn EXTI9_5_IRQn
/**
* @brief Joystick Up push-button
*/
#define UP_JOY_PIN GPIO_PIN_7
#define UP_JOY_GPIO_PORT GPIOE
#define UP_JOY_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE()
#define UP_JOY_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE()
#define UP_JOY_EXTI_IRQn EXTI9_5_IRQn
/**
* @brief Joystick Down push-button
*/
#define DOWN_JOY_PIN GPIO_PIN_5
#define DOWN_JOY_GPIO_PORT GPIOD
#define DOWN_JOY_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE()
#define DOWN_JOY_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE()
#define DOWN_JOY_EXTI_IRQn EXTI9_5_IRQn
/**
* @brief Joystick Sel push-button
*/
#define SEL_JOY_PIN GPIO_PIN_13
#define SEL_JOY_GPIO_PORT GPIOC
#define SEL_JOY_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE()
#define SEL_JOY_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE()
#define SEL_JOY_EXTI_IRQn EXTI15_10_IRQn
#define BUTTONx_GPIO_CLK_ENABLE(__BUTTON__) do { if ((__BUTTON__) == BUTTON_KEY) KEY_BUTTON_GPIO_CLK_ENABLE(); else\
if ((__BUTTON__) == BUTTON_SEL) SEL_JOY_GPIO_CLK_ENABLE(); else\
if ((__BUTTON__) == BUTTON_LEFT) LEFT_JOY_GPIO_CLK_ENABLE(); else\
if ((__BUTTON__) == BUTTON_RIGHT) RIGHT_JOY_GPIO_CLK_ENABLE(); else\
if ((__BUTTON__) == BUTTON_DOWN) DOWN_JOY_GPIO_CLK_ENABLE(); else\
if ((__BUTTON__) == BUTTON_UP) UP_JOY_GPIO_CLK_ENABLE();} while(0)
#define BUTTONx_GPIO_CLK_DISABLE(__BUTTON__) (((__BUTTON__) == BUTTON_KEY) ? KEY_BUTTON_GPIO_CLK_DISABLE() :\
((__BUTTON__) == BUTTON_SEL) ? SEL_JOY_GPIO_CLK_DISABLE() :\
((__BUTTON__) == BUTTON_LEFT) ? LEFT_JOY_GPIO_CLK_DISABLE() :\
((__BUTTON__) == BUTTON_RIGHT) ? RIGHT_JOY_GPIO_CLK_DISABLE() :\
((__BUTTON__) == BUTTON_DOWN) ? DOWN_JOY_GPIO_CLK_DISABLE() :\
((__BUTTON__) == BUTTON_UP) ? UP_JOY_GPIO_CLK_DISABLE() : 0 )
#define JOYx_GPIO_CLK_ENABLE(__JOY__) do { if ((__JOY__) == JOY_SEL) SEL_JOY_GPIO_CLK_ENABLE(); else\
if ((__JOY__) == JOY_LEFT) LEFT_JOY_GPIO_CLK_ENABLE(); else\
if ((__JOY__) == JOY_RIGHT) RIGHT_JOY_GPIO_CLK_ENABLE(); else\
if ((__JOY__) == JOY_DOWN) DOWN_JOY_GPIO_CLK_ENABLE(); else\
if ((__JOY__) == JOY_UP) UP_JOY_GPIO_CLK_ENABLE();} while(0)
#define JOYx_GPIO_CLK_DISABLE(__JOY__) (((__JOY__) == JOY_SEL) ? SEL_JOY_GPIO_CLK_DISABLE() :\
((__JOY__) == JOY_LEFT) ? LEFT_JOY_GPIO_CLK_DISABLE() :\
((__JOY__) == JOY_RIGHT) ? RIGHT_JOY_GPIO_CLK_DISABLE() :\
((__JOY__) == JOY_DOWN) ? DOWN_JOY_GPIO_CLK_DISABLE() :\
((__JOY__) == JOY_UP) ? UP_JOY_GPIO_CLK_DISABLE() : 0 )
/**
* @}
*/
/** @defgroup STM32303E_EVAL_COM STM32303E-EVAL COM
* @{
*/
/* Exported constant IO ------------------------------------------------------*/
/*##################### I2Cx ###################################*/
/* User can use this section to tailor I2Cx instance used and associated
resources */
/* Definition for I2Cx Pins */
#define EVAL_I2Cx_SCL_PIN GPIO_PIN_6
#define EVAL_I2Cx_SCL_GPIO_PORT GPIOF
#define EVAL_I2Cx_SDA_PIN GPIO_PIN_10
#define EVAL_I2Cx_SDA_GPIO_PORT GPIOA
#define EVAL_I2Cx_SCL_SDA_AF GPIO_AF4_I2C2
/* Definition for I2Cx clock resources */
#define EVAL_I2Cx I2C2
#define EVAL_I2Cx_CLK_ENABLE() __HAL_RCC_I2C2_CLK_ENABLE()
#define EVAL_I2Cx_SDA_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
#define EVAL_I2Cx_SCL_GPIO_CLK_ENABLE() __HAL_RCC_GPIOF_CLK_ENABLE()
#define EVAL_I2Cx_FORCE_RESET() __HAL_RCC_I2C2_FORCE_RESET()
#define EVAL_I2Cx_RELEASE_RESET() __HAL_RCC_I2C2_RELEASE_RESET()
/* Definition for I2Cx's NVIC */
#define EVAL_I2Cx_EV_IRQn I2C2_EV_IRQn
#define EVAL_I2Cx_EV_IRQHandler I2C2_EV_IRQHandler
#define EVAL_I2Cx_ER_IRQn I2C2_ER_IRQn
#define EVAL_I2Cx_ER_IRQHandler I2C2_ER_IRQHandler
/* I2C TIMING Register define when I2C clock source is SYSCLK */
/* I2C TIMING is calculated in case of the I2C Clock source is the SYSCLK = 72 MHz */
/* Set 0xC062121F value to reach 100 KHz speed (Rise time = 640ns, Fall time = 20ns) */
#ifndef EVAL_I2Cx_TIMING
#define EVAL_I2Cx_TIMING 0xC062121F
#endif /* EVAL_I2Cx_TIMING */
/* Maximum Timeout values for flags waiting loops. These timeouts are not based
on accurate values, they just guarantee that the application will not remain
stuck if the I2C communication is corrupted.
You may modify these timeout values depending on CPU frequency and application
conditions (interrupts routines ...). */
#define EVAL_I2Cx_TIMEOUT_MAX 3000
/*##################### SPI2 ###################################*/
#define EVAL_SPIx SPI2
#define EVAL_SPIx_CLK_ENABLE() __HAL_RCC_SPI2_CLK_ENABLE()
#define EVAL_SPIx_SCK_AF GPIO_AF5_SPI2
#define EVAL_SPIx_SCK_GPIO_PORT GPIOF
#define EVAL_SPIx_SCK_PIN GPIO_PIN_9
#define EVAL_SPIx_SCK_GPIO_CLK_ENABLE() __HAL_RCC_GPIOF_CLK_ENABLE()
#define EVAL_SPIx_SCK_GPIO_CLK_DISABLE() __HAL_RCC_GPIOF_CLK_DISABLE()
#define EVAL_SPIx_MISO_MOSI_AF GPIO_AF5_SPI2
#define EVAL_SPIx_MISO_MOSI_GPIO_PORT GPIOB
#define EVAL_SPIx_MISO_MOSI_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
#define EVAL_SPIx_MISO_MOSI_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
#define EVAL_SPIx_MISO_PIN GPIO_PIN_14
#define EVAL_SPIx_MOSI_PIN GPIO_PIN_15
/* Maximum Timeout values for flags waiting loops. These timeouts are not based
on accurate values, they just guarantee that the application will not remain
stuck if the SPI communication is corrupted.
You may modify these timeout values depending on CPU frequency and application
conditions (interrupts routines ...). */
#define EVAL_SPIx_TIMEOUT_MAX 1000
#define COMn 1
/**
* @brief Definition for COM port1, connected to USART1
*/
#define EVAL_COM1 USART1
#define EVAL_COM1_CLK_ENABLE() __HAL_RCC_USART1_CLK_ENABLE()
#define EVAL_COM1_CLK_DISABLE() __HAL_RCC_USART1_CLK_DISABLE()
#define EVAL_COM1_TX_PIN GPIO_PIN_4
#define EVAL_COM1_TX_GPIO_PORT GPIOC
#define EVAL_COM1_TX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE()
#define EVAL_COM1_TX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE()
#define EVAL_COM1_TX_AF GPIO_AF7_USART1
#define EVAL_COM1_RX_PIN GPIO_PIN_1
#define EVAL_COM1_RX_GPIO_PORT GPIOE
#define EVAL_COM1_RX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE()
#define EVAL_COM1_RX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE()
#define EVAL_COM1_RX_AF GPIO_AF7_USART1
#define EVAL_COM1_IRQn USART1_IRQn
#define COMx_CLK_ENABLE(__INDEX__) do { if ((__INDEX__) == COM1) EVAL_COM1_CLK_ENABLE();} while(0)
#define COMx_CLK_DISABLE(__INDEX__) (((__INDEX__) == COM1) ? EVAL_COM1_CLK_DISABLE() : 0)
#define COMx_TX_GPIO_CLK_ENABLE(__INDEX__) do { if ((__INDEX__) == COM1) EVAL_COM1_TX_GPIO_CLK_ENABLE();} while(0)
#define COMx_TX_GPIO_CLK_DISABLE(__INDEX__) (((__INDEX__) == COM1) ? EVAL_COM1_TX_GPIO_CLK_DISABLE() : 0)
#define COMx_RX_GPIO_CLK_ENABLE(__INDEX__) do { if ((__INDEX__) == COM1) EVAL_COM1_RX_GPIO_CLK_ENABLE();} while(0)
#define COMx_RX_GPIO_CLK_DISABLE(__INDEX__) (((__INDEX__) == COM1) ? EVAL_COM1_RX_GPIO_CLK_DISABLE() : 0)
/**
* @}
*/
/** @defgroup STM32303E_EVAL_COMPONENT STM32303E-EVAL COMPONENT
* @{
*/
/*##################### LCD ###################################*/
/* Chip Select macro definition */
#define LCD_CS_LOW() HAL_GPIO_WritePin(LCD_NCS_GPIO_PORT, LCD_NCS_PIN, GPIO_PIN_RESET)
#define LCD_CS_HIGH() HAL_GPIO_WritePin(LCD_NCS_GPIO_PORT, LCD_NCS_PIN, GPIO_PIN_SET)
/**
* @brief LCD Control Interface pins
*/
#define LCD_NCS_PIN GPIO_PIN_0
#define LCD_NCS_GPIO_PORT GPIOE
#define LCD_NCS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE()
#define LCD_NCS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE()
/*##################### SD ###################################*/
/* Chip Select macro definition */
#define SD_CS_LOW() HAL_GPIO_WritePin(SD_CS_GPIO_PORT, SD_CS_PIN, GPIO_PIN_RESET)
#define SD_CS_HIGH() HAL_GPIO_WritePin(SD_CS_GPIO_PORT, SD_CS_PIN, GPIO_PIN_SET)
/**
* @brief SD Control Interface pins
*/
#define SD_CS_PIN GPIO_PIN_15
#define SD_CS_GPIO_PORT GPIOE
#define SD_CS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE()
#define SD_CS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE()
/**
* @brief SD Detect Interface pins
*/
#define SD_DETECT_PIN GPIO_PIN_6
#define SD_DETECT_GPIO_PORT GPIOC
#define SD_DETECT_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE()
#define SD_DETECT_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE()
#define SD_DETECT_EXTI_IRQn EXTI9_5_IRQn
/*##################### EEPROM SPI ###################################*/
/* Chip Select macro definition */
#define EEPROM_CS_LOW() HAL_GPIO_WritePin(EEPROM_CS_GPIO_PORT, EEPROM_CS_PIN, GPIO_PIN_RESET)
#define EEPROM_CS_HIGH() HAL_GPIO_WritePin(EEPROM_CS_GPIO_PORT, EEPROM_CS_PIN, GPIO_PIN_SET)
/**
* @brief EEPROM Control Interface pins
*/
#define EEPROM_CS_PIN GPIO_PIN_7
#define EEPROM_CS_GPIO_PORT GPIOD
#define EEPROM_CS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE()
#define EEPROM_CS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE()
/**
* @}
*/
/**
* @}
*/
/** @defgroup STM32303E_EVAL_Exported_Functions Exported Functions
* @{
*/
uint32_t BSP_GetVersion(void);
void BSP_LED_Init(Led_TypeDef Led);
void BSP_LED_On(Led_TypeDef Led);
void BSP_LED_Off(Led_TypeDef Led);
void BSP_LED_Toggle(Led_TypeDef Led);
void BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef Button_Mode);
uint32_t BSP_PB_GetState(Button_TypeDef Button);
uint8_t BSP_JOY_Init(JOYMode_TypeDef Joy_Mode);
JOYState_TypeDef BSP_JOY_GetState(void);
#if defined(HAL_UART_MODULE_ENABLED)
void BSP_COM_Init(COM_TypeDef COM, UART_HandleTypeDef* huart);
#endif /* HAL_UART_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
Reference in New Issue View Git Blame Copy Permalink