mirror of
https://github.com/STMicroelectronics/STM32CubeF3.git
synced 2025-05-01 22:18:23 +08:00
361 lines
12 KiB
C
361 lines
12 KiB
C
/**
|
|
******************************************************************************
|
|
* @file RCC/RCC_ClockConfig/Src/main.c
|
|
* @author MCD Application Team
|
|
* @brief This example describes how to use the RCC HAL API to configure the
|
|
* system clock (SYSCLK) and modify the clock settings on run time.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
|
* All rights reserved.</center></h2>
|
|
*
|
|
* This software component is licensed by ST under BSD 3-Clause license,
|
|
* the "License"; You may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at:
|
|
* opensource.org/licenses/BSD-3-Clause
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "main.h"
|
|
|
|
/** @addtogroup STM32F3xx_HAL_Examples
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup RCC_ClockConfig
|
|
* @{
|
|
*/
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
__IO FlagStatus SwitchClock = RESET;
|
|
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
void SystemClock_Config(void);
|
|
static void SystemClockHSI_Config(void);
|
|
static void SystemClockHSE_Config(void);
|
|
static void SwitchSystemClock(void);
|
|
static void Error_Handler(void);
|
|
|
|
/* Private functions ---------------------------------------------------------*/
|
|
|
|
/**
|
|
* @brief Main program
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
int main(void)
|
|
{
|
|
/* STM32F3xx HAL library initialization:
|
|
- Configure the Flash prefetch
|
|
- Systick timer is configured by default as source of time base, but user
|
|
can eventually implement his proper time base source (a general purpose
|
|
timer for example or other time source), keeping in mind that Time base
|
|
duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
|
|
handled in milliseconds basis.
|
|
- Set NVIC Group Priority to 4
|
|
- Low Level Initialization
|
|
*/
|
|
HAL_Init();
|
|
|
|
/* Configure LED1 and LED3 */
|
|
BSP_LED_Init(LED1);
|
|
BSP_LED_Init(LED3);
|
|
|
|
/* Initialize Key push-button, will be used to trigger an interrupt each time it's pressed.
|
|
In the ISR the PLL source will be changed from HSI to HSE circularly */
|
|
BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_EXTI);
|
|
|
|
/* Enable HSE oscillator and configure the PLL to reach the max system frequency (72 MHz)
|
|
when using HSE oscillator as PLL clock source. */
|
|
SystemClock_Config();
|
|
|
|
/* Output SYSCLK on MCO pin(PA.08) */
|
|
HAL_RCC_MCOConfig(RCC_MCO, RCC_MCO1SOURCE_SYSCLK, RCC_MCODIV_1);
|
|
|
|
/* Toggle some leds in an infinite loop */
|
|
while (1)
|
|
{
|
|
/* check if user button has been pressed to switch clock config */
|
|
if(SwitchClock != RESET)
|
|
{
|
|
SwitchSystemClock();
|
|
}
|
|
|
|
/* Toggle LED1 */
|
|
BSP_LED_Toggle(LED1);
|
|
HAL_Delay(100);
|
|
}
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief EXTI line detection callbacks.
|
|
* @param GPIO_Pin: Specifies the pins connected EXTI line
|
|
* @retval None
|
|
*/
|
|
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
|
|
{
|
|
if (GPIO_Pin == KEY_BUTTON_PIN)
|
|
{
|
|
SwitchClock = SET;
|
|
}
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief switch in system clock out of ISR context.
|
|
* @retval None
|
|
*/
|
|
static void SwitchSystemClock(void)
|
|
{
|
|
if (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSI)
|
|
{
|
|
/* PLL source is HSI oscillator */
|
|
/* Set SYSCLK frequency to 72 MHz, coming from the PLL which is clocked by HSE */
|
|
SystemClockHSE_Config();
|
|
}
|
|
else if (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE)
|
|
{
|
|
/* PLL source is HSE oscillator */
|
|
/* Set SYSCLK frequency to 72 MHz, coming from the PLL which is clocked by HSI */
|
|
SystemClockHSI_Config();
|
|
}
|
|
|
|
/* reset global variable */
|
|
SwitchClock = RESET;
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief System Clock Configuration
|
|
* The system Clock is configured as follow :
|
|
* System Clock source = PLL (HSE)
|
|
* SYSCLK(Hz) = 72000000
|
|
* HCLK(Hz) = 72000000
|
|
* AHB Prescaler = 1
|
|
* APB1 Prescaler = 2
|
|
* APB2 Prescaler = 1
|
|
* HSE Frequency(Hz) = 8000000
|
|
* HSE PREDIV = 1
|
|
* PLLMUL = RCC_PLL_MUL9 (9)
|
|
* Flash Latency(WS) = 2
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void SystemClock_Config(void)
|
|
{
|
|
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
|
RCC_OscInitTypeDef RCC_OscInitStruct;
|
|
|
|
/* Enable HSE Oscillator and activate PLL with HSE as source */
|
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
|
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
|
RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
|
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
|
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
|
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9;
|
|
if (HAL_RCC_OscConfig(&RCC_OscInitStruct)!= HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
|
|
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2
|
|
clocks dividers */
|
|
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
|
|
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
|
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
|
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
|
|
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
|
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2)!= HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief Switch the PLL source from HSI to HSE , and select the PLL as SYSCLK
|
|
* source.
|
|
* The system Clock is configured as follow :
|
|
* System Clock source = PLL (HSE )
|
|
* SYSCLK(Hz) = 72000000
|
|
* HCLK(Hz) = 72000000
|
|
* AHB Prescaler = 1
|
|
* APB1 Prescaler = 2
|
|
* APB2 Prescaler = 1
|
|
* HSE Frequency(Hz) = 8000000
|
|
* HSE PREDIV = 1
|
|
* PLLMUL = 9
|
|
* Flash Latency(WS) = 2
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SystemClockHSE_Config(void)
|
|
{
|
|
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
|
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
|
|
|
/* -1- Select HSI as system clock source to allow modification of the PLL configuration */
|
|
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK;
|
|
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI;
|
|
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK)
|
|
{
|
|
/* Initialization Error */
|
|
Error_Handler();
|
|
}
|
|
|
|
/* -2- Enable HSE Oscillator, select it as PLL source and finally activate the PLL */
|
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
|
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
|
RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
|
|
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
|
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9;
|
|
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
|
{
|
|
/* Initialization Error */
|
|
Error_Handler();
|
|
}
|
|
|
|
/* -3- Select the PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
|
|
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
|
|
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
|
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
|
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
|
|
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
|
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
|
|
{
|
|
/* Initialization Error */
|
|
Error_Handler();
|
|
}
|
|
|
|
/* -4- Optional: Disable HSI Oscillator (if the HSI is no more needed by the application)*/
|
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
|
|
RCC_OscInitStruct.HSIState = RCC_HSI_OFF;
|
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
|
|
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
|
{
|
|
/* Initialization Error */
|
|
Error_Handler();
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Switch the PLL source from HSE to HSI, and select the PLL as SYSCLK
|
|
* source.
|
|
* The system Clock is configured as follow :
|
|
* System Clock source = PLL (HSI)
|
|
* SYSCLK(Hz) = 64000000
|
|
* HCLK(Hz) = 64000000
|
|
* AHB Prescaler = 1
|
|
* APB1 Prescaler = 2
|
|
* APB2 Prescaler = 1
|
|
* HSI Frequency(Hz) = 8000000
|
|
* PLLMUL = 16
|
|
* Flash Latency(WS) = 2
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void SystemClockHSI_Config(void)
|
|
{
|
|
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
|
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
|
|
|
/* -1- Select HSE as system clock source to allow modification of the PLL configuration */
|
|
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK;
|
|
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSE;
|
|
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK)
|
|
{
|
|
/* Initialization Error */
|
|
Error_Handler();
|
|
}
|
|
|
|
/* -2- Enable HSI Oscillator, select it as PLL source and finally activate the PLL */
|
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
|
|
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
|
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
|
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
|
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
|
|
/* PLL source is the HSI frequency divided by 2 */
|
|
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL16;
|
|
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
|
{
|
|
/* Initialization Error */
|
|
Error_Handler();
|
|
}
|
|
|
|
/* -3- Select the PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
|
|
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
|
|
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
|
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
|
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
|
|
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
|
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
|
|
{
|
|
/* Initialization Error */
|
|
Error_Handler();
|
|
}
|
|
|
|
/* -4- Optional: Disable HSE Oscillator (if the HSE is no more needed by the application) */
|
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
|
RCC_OscInitStruct.HSEState = RCC_HSE_OFF;
|
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
|
|
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
|
{
|
|
/* Initialization Error */
|
|
Error_Handler();
|
|
}
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief This function is executed in case of error occurrence.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void Error_Handler(void)
|
|
{
|
|
/* Turn LED4 on */
|
|
BSP_LED_On(LED3);
|
|
|
|
while (1)
|
|
{
|
|
}
|
|
}
|
|
|
|
#ifdef USE_FULL_ASSERT
|
|
/**
|
|
* @brief Reports the name of the source file and the source line number
|
|
* where the assert_param error has occurred.
|
|
* @param file: pointer to the source file name
|
|
* @param line: assert_param error line source number
|
|
* @retval None
|
|
*/
|
|
void assert_failed(uint8_t *file, uint32_t line)
|
|
{
|
|
/* User can add his own implementation to report the file name and line number,
|
|
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
|
|
|
/* Infinite loop */
|
|
while (1)
|
|
{
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|