mirror of
https://github.com/STMicroelectronics/STM32CubeF2.git
synced 2025-05-09 19:29:32 +08:00
120 lines
5.7 KiB
Plaintext
120 lines
5.7 KiB
Plaintext
/**
|
|
@page LCD_Paint LCD Paint application
|
|
|
|
@verbatim
|
|
******************** (C) COPYRIGHT 2017 STMicroelectronics *******************
|
|
* @file Display/LCD_Paint/Readme.txt
|
|
* @author MCD Application Team
|
|
* @brief Description of the LCD Paint application.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
|
* All rights reserved.</center></h2>
|
|
*
|
|
* This software component is licensed by ST under BSD 3-Clause license,
|
|
* the "License"; You may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at:
|
|
* opensource.org/licenses/BSD-3-Clause
|
|
*
|
|
******************************************************************************
|
|
@endverbatim
|
|
|
|
@par Application Description
|
|
|
|
This application describes how to configure LCD touch screen and attribute
|
|
an action related to configured touch zone and how to save BMP picture in SD Card.
|
|
|
|
At the beginning of the main program the HAL_Init() function is called to reset
|
|
all the peripherals, initialize the Flash interface and the systick.
|
|
Then the SystemClock_Config() function is used to configure the system
|
|
clock (SYSCLK) to run at 120 MHz.
|
|
|
|
After LCD and touch screen initialization, touchscreen calibration is requested
|
|
for better accuracy, then, menu is displayed on the screen.
|
|
|
|
The menu contains palette of colors, clear icon, save icon, different kind
|
|
of draw size, the current selected size, selected color and working rectangle.
|
|
|
|
Select one of proposed colors and select the size of brush to draw
|
|
inside the working rectangle.
|
|
|
|
Clear the working window by pressing the clear icon or/and save the picture
|
|
in SDCard by pressing the save icon.
|
|
|
|
LCD Menu
|
|
____________________________________________________________
|
|
/ |______|---------------------------------------------------- |
|
|
| |______|| ||
|
|
| |______|| ||
|
|
| |______|| ||
|
|
| |______|| ||
|
|
| |______|| ||
|
|
palette | |______|| Working Rectangle ||
|
|
of __| |______|| ||
|
|
Colors | |______|| ||
|
|
| |______|| ||
|
|
| |______|| ||
|
|
| |______|| ||
|
|
| |______||___________________________________________________||
|
|
\ |______|__________________ _________ __ |
|
|
|clear | choose the brush| Save | |__| O |
|
|
|______|________size______|__SDCard_|__selected color__size__|
|
|
|
|
|
|
- LED1 is on to indicate the end of saving operation.
|
|
- LED3 is ON when any error occurs.
|
|
|
|
Note: After save operation, the touch positions are not cleared from STMPE811 FIFO
|
|
and the next touch in any positions of the LCD screen leads second save
|
|
operation.
|
|
|
|
|
|
@note Care must be taken when using HAL_Delay(), this function provides accurate delay (in milliseconds)
|
|
based on variable incremented in SysTick ISR. This implies that if HAL_Delay() is called from
|
|
a peripheral ISR process, then the SysTick interrupt must have higher priority (numerically lower)
|
|
than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
|
|
To change the SysTick interrupt priority you have to use HAL_NVIC_SetPriority() function.
|
|
|
|
@note The application needs to ensure that the SysTick time base is always set to 1 millisecond
|
|
to have correct HAL operation.
|
|
|
|
@par Directory contents
|
|
|
|
- Display/LCD_Paint/Inc/main.h Main program header file
|
|
- Display/LCD_Paint/Inc/stm32f2xx_it.h Interrupt handlers header file
|
|
- Display/LCD_Paint/Inc/stm32f2xx_hal_conf.h HAL Configuration file
|
|
- Display/LCD_Paint/Inc/color.h Image used for LCD Validation
|
|
- Display/LCD_Paint/Inc/save.h Image used for LCD Validation
|
|
- Display/LCD_Paint/Inc/fatfs_storage.h Header for fatfs_storage.c
|
|
- Display/LCD_Paint/Inc/ffconf.h FAT file system module configuration file
|
|
- Display/LCD_Paint/Src/main.c Main program
|
|
- Display/LCD_Paint/Src/stm32f2xx_it.c Interrupt handlers
|
|
- Display/LCD_Paint/Src/system_stm32f2xx.c STM32F2xx system clock configuration file
|
|
- Display/LCD_Paint/Src/ts_calibration.c Touchscreen calibration driver
|
|
- Display/LCD_Paint/Src/fatfs_storage.c Storage (FatFs) driver
|
|
|
|
|
|
@par Hardware and Software environment
|
|
|
|
- This application runs on STM32F2xx devices.
|
|
|
|
- This application has been tested with STM322xG-EVAL evaluation board
|
|
and can be easily tailored to any other supported device and development board.
|
|
|
|
- STM322xG-EVAL Set-up
|
|
- Connect a uSD Card to the MSD connector (CN6).
|
|
- Please ensure that jumpers JP16 and JP22 are in position 1-2.
|
|
|
|
|
|
@par How to use it ?
|
|
|
|
In order to make the program work, you must do the following :
|
|
- Open your preferred toolchain
|
|
- Rebuild all files and load your image into target memory
|
|
- Run the application
|
|
|
|
* <h3><center>© COPYRIGHT STMicroelectronics</center></h3>
|
|
*/
|
|
|