mirror of
https://github.com/STMicroelectronics/STM32CubeF1.git
synced 2025-05-01 22:18:06 +08:00
267 lines
7.5 KiB
C
267 lines
7.5 KiB
C
/**
|
|
******************************************************************************
|
|
* @file Examples_LL/PWR/PWR_EnterStopMode/Src/main.c
|
|
* @author MCD Application Team
|
|
* @brief This example describes how to enter and exit the STOP_MAINREGU mode
|
|
* through the STM32F1xx PWR LL API.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
|
* All rights reserved.</center></h2>
|
|
*
|
|
* This software component is licensed by ST under BSD 3-Clause license,
|
|
* the "License"; You may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at:
|
|
* opensource.org/licenses/BSD-3-Clause
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "main.h"
|
|
|
|
/** @addtogroup STM32F1xx_LL_Examples
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup PWR_EnterStopMode
|
|
* @{
|
|
*/
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
void SystemClock_Config(void);
|
|
void Configure_PWR(void);
|
|
void LED_Init(void);
|
|
void LED_Off(void);
|
|
void LED_Blinking_5s(void);
|
|
void EnterSTOP_MAINREGUMode(void);
|
|
/* Private functions ---------------------------------------------------------*/
|
|
|
|
/**
|
|
* @brief Main program
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
int main(void)
|
|
{
|
|
/* Configure the system clock to 72 MHz */
|
|
SystemClock_Config();
|
|
|
|
/* Initialize LED2 */
|
|
LED_Init();
|
|
|
|
/* Configure Power IP */
|
|
Configure_PWR();
|
|
|
|
/* Led blinking during 5s in RUN mode */
|
|
LED_Blinking_5s();
|
|
|
|
/* Switch OFF LED2 */
|
|
LED_Off();
|
|
|
|
/* Enter STOP_MAINREGU mode */
|
|
EnterSTOP_MAINREGUMode();
|
|
|
|
/* Here Device is in STOP_MAINREGU mode */
|
|
|
|
/* Infinite loop */
|
|
while (1)
|
|
{
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Initialize LED2.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void LED_Init(void)
|
|
{
|
|
/* Enable the LED2 Clock */
|
|
LED2_GPIO_CLK_ENABLE();
|
|
|
|
/* Configure IO in output push-pull mode to drive external LED2 */
|
|
LL_GPIO_SetPinMode(LED2_GPIO_PORT, LED2_PIN, LL_GPIO_MODE_OUTPUT);
|
|
/* Reset value is LL_GPIO_OUTPUT_PUSHPULL */
|
|
//LL_GPIO_SetPinOutputType(LED2_GPIO_PORT, LED2_PIN, LL_GPIO_OUTPUT_PUSHPULL);
|
|
/* Reset value is LL_GPIO_SPEED_FREQ_LOW */
|
|
//LL_GPIO_SetPinSpeed(LED2_GPIO_PORT, LED2_PIN, LL_GPIO_SPEED_FREQ_LOW);
|
|
/* Reset value is LL_GPIO_PULL_NO */
|
|
//LL_GPIO_SetPinPull(LED2_GPIO_PORT, LED2_PIN, LL_GPIO_PULL_NO);
|
|
}
|
|
|
|
/**
|
|
* @brief Turn-off LED2.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void LED_Off(void)
|
|
{
|
|
/* Turn LED2 off */
|
|
LL_GPIO_ResetOutputPin(LED2_GPIO_PORT, LED2_PIN);
|
|
}
|
|
|
|
/**
|
|
* @brief Set LED2 to Blinking mode during 5s.
|
|
* @param None
|
|
|
|
* @retval None
|
|
*/
|
|
void LED_Blinking_5s(void)
|
|
{
|
|
uint32_t i = 0;
|
|
|
|
/* Toggle IO in during 5s (25*200ms) */
|
|
for(i = 0; i < 25; i++)
|
|
{
|
|
LL_GPIO_TogglePin(LED2_GPIO_PORT, LED2_PIN);
|
|
LL_mDelay(200);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Function to configure and initialize PWR IP.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void Configure_PWR(void)
|
|
{
|
|
/* Enable Power Clock */
|
|
LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_PWR);
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief Function to configure and enter in STOP_MAINREGU Mode.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void EnterSTOP_MAINREGUMode(void)
|
|
{
|
|
LL_GPIO_InitTypeDef gpio_initstruct = {LL_GPIO_PIN_ALL, LL_GPIO_MODE_ANALOG,
|
|
LL_GPIO_SPEED_FREQ_HIGH, LL_GPIO_OUTPUT_PUSHPULL};
|
|
|
|
/* Set all GPIO in analog state to reduce power consumption, */
|
|
/* Note: Debug using ST-Link is not possible during the execution of this */
|
|
/* example because communication between ST-link and the device */
|
|
/* under test is done through UART. All GPIO pins are disabled (set */
|
|
/* to analog input mode) including UART I/O pins. */
|
|
LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_GPIOA |
|
|
LL_APB2_GRP1_PERIPH_GPIOB |
|
|
LL_APB2_GRP1_PERIPH_GPIOC |
|
|
LL_APB2_GRP1_PERIPH_GPIOD |
|
|
LL_APB2_GRP1_PERIPH_GPIOE);
|
|
|
|
LL_GPIO_Init(GPIOA, &gpio_initstruct);
|
|
LL_GPIO_Init(GPIOB, &gpio_initstruct);
|
|
LL_GPIO_Init(GPIOC, &gpio_initstruct);
|
|
LL_GPIO_Init(GPIOD, &gpio_initstruct);
|
|
LL_GPIO_Init(GPIOE, &gpio_initstruct);
|
|
|
|
LL_APB2_GRP1_DisableClock(LL_APB2_GRP1_PERIPH_GPIOA |
|
|
LL_APB2_GRP1_PERIPH_GPIOB |
|
|
LL_APB2_GRP1_PERIPH_GPIOC |
|
|
LL_APB2_GRP1_PERIPH_GPIOD |
|
|
LL_APB2_GRP1_PERIPH_GPIOE);
|
|
|
|
/** Request to enter STOP_MAINREGU mode
|
|
* Following procedure describe in STM32F1xx Reference Manual
|
|
* See PWR part, section Low-power modes, STOP_MAINREGU mode
|
|
*/
|
|
/* Set STOP_MAINREGU mode when CPU enters deepsleep */
|
|
LL_PWR_SetPowerMode(LL_PWR_MODE_STOP_MAINREGU);
|
|
|
|
/* Set SLEEPDEEP bit of Cortex System Control Register */
|
|
LL_LPM_EnableDeepSleep();
|
|
|
|
/* Request Wait For Interrupt */
|
|
__WFI();
|
|
}
|
|
|
|
/**
|
|
* @brief System Clock Configuration
|
|
* The system Clock is configured as follow :
|
|
* System Clock source = PLL (HSE)
|
|
* SYSCLK(Hz) = 72000000
|
|
* HCLK(Hz) = 72000000
|
|
* AHB Prescaler = 1
|
|
* APB1 Prescaler = 2
|
|
* APB2 Prescaler = 1
|
|
* HSE Frequency(Hz) = 8000000
|
|
* PLLMUL = 9
|
|
* Flash Latency(WS) = 2
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void SystemClock_Config(void)
|
|
{
|
|
/* Set FLASH latency */
|
|
LL_FLASH_SetLatency(LL_FLASH_LATENCY_2);
|
|
|
|
/* Enable HSE oscillator */
|
|
LL_RCC_HSE_EnableBypass();
|
|
LL_RCC_HSE_Enable();
|
|
while(LL_RCC_HSE_IsReady() != 1)
|
|
{
|
|
};
|
|
|
|
/* Main PLL configuration and activation */
|
|
LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSE_DIV_1, LL_RCC_PLL_MUL_9);
|
|
|
|
LL_RCC_PLL_Enable();
|
|
while(LL_RCC_PLL_IsReady() != 1)
|
|
{
|
|
};
|
|
|
|
/* Sysclk activation on the main PLL */
|
|
LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
|
|
LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
|
|
while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
|
|
{
|
|
};
|
|
|
|
/* Set APB1 & APB2 prescaler*/
|
|
LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_2);
|
|
LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_1);
|
|
|
|
/* Set systick to 1ms in using frequency set to 72MHz */
|
|
LL_Init1msTick(72000000);
|
|
|
|
/* Update CMSIS variable (which can be updated also through SystemCoreClockUpdate function) */
|
|
LL_SetSystemCoreClock(72000000);
|
|
}
|
|
#ifdef USE_FULL_ASSERT
|
|
|
|
/**
|
|
* @brief Reports the name of the source file and the source line number
|
|
* where the assert_param error has occurred.
|
|
* @param file: pointer to the source file name
|
|
* @param line: assert_param error line source number
|
|
* @retval None
|
|
*/
|
|
void assert_failed(uint8_t *file, uint32_t line)
|
|
{
|
|
/* User can add his own implementation to report the file name and line number,
|
|
ex: printf("Wrong parameters value: file %s on line %d", file, line) */
|
|
|
|
/* Infinite loop */
|
|
while (1)
|
|
{
|
|
}
|
|
}
|
|
#endif
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|