OrgST-Microelectronics/STM32CubeF1
1
0
Fork 0
mirror of https://github.com/STMicroelectronics/STM32CubeF1.git synced 2025-05-05 19:30:01 +08:00
Code Issues Releases Wiki Activity
STM32CubeF1/Projects/STM32F103RB-Nucleo/Examples/ADC/ADC_AnalogWatchdog/Src/main.c
Rania JMAI 5326afcfb2 Release v1.8.5
2023-04-28 10:02:38 +01:00

522 lines
19 KiB
C
Raw Blame History

/**
******************************************************************************
* @file ADC/ADC_AnalogWatchdog/Src/main.c
* @author MCD Application Team
* @brief This example provides a short description of how to use the ADC
* peripheral to perform conversions with analog watchdog and
* interruptions. Other peripherals used: DMA, TIM (ADC group regular
* conversions triggered by TIM, ADC group regular conversion data
* transferred by DMA).
******************************************************************************
* @attention
*
* Copyright (c) 2016 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "main.h"
/** @addtogroup STM32F1xx_HAL_Examples
* @{
*/
/** @addtogroup ADC_AnalogWatchdog
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
#define RANGE_12BITS ((uint32_t) 4095) /* Max value with a full range of 12 bits */
#define USERBUTTON_CLICK_COUNT_MAX ((uint32_t) 4) /* Maximum value of variable "UserButtonClickCount" */
#define ADCCONVERTEDVALUES_BUFFER_SIZE ((uint32_t) 256) /* Size of array containing ADC converted values */
#if defined(ADC_TRIGGER_FROM_TIMER)
#define TIMER_FREQUENCY ((uint32_t) 1000) /* Timer frequency (unit: Hz). With a timer 16 bits and time base freq min 1Hz, range is min=1Hz, max=32kHz. */
#define TIMER_FREQUENCY_RANGE_MIN ((uint32_t) 1) /* Timer minimum frequency (unit: Hz). With a timer 16 bits, maximum frequency will be 32000 times this value. */
#define TIMER_PRESCALER_MAX_VALUE (0xFFFF-1) /* Timer prescaler maximum value (0xFFFF for a timer 16 bits) */
#endif /* ADC_TRIGGER_FROM_TIMER */
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* ADC handler declaration */
ADC_HandleTypeDef AdcHandle;
#if defined(ADC_TRIGGER_FROM_TIMER)
/* TIM handler declaration */
TIM_HandleTypeDef TimHandle;
#endif /* ADC_TRIGGER_FROM_TIMER */
/* Note: This example, on some other STM32 boards, is performing */
/* DAC handler declaration here. */
/* On STM32F103RB-Nucleo, the device has no DAC available, */
/* therefore analog signal must be supplied externally. */
/* Variable containing ADC conversions results */
__IO uint16_t aADCxConvertedValues[ADCCONVERTEDVALUES_BUFFER_SIZE];
/* Variable to report ADC analog watchdog status: */
/* RESET <=> voltage into AWD window */
/* SET <=> voltage out of AWD window */
uint8_t ubAnalogWatchdogStatus = RESET; /* Set into analog watchdog interrupt callback */
/* Variables to manage push button on board: interface between ExtLine interruption and main program */
uint8_t ubUserButtonClickCount = 0; /* Count number of clicks: Incremented after User Button interrupt */
__IO uint8_t ubUserButtonClickEvent = RESET; /* Event detection: Set after User Button interrupt */
/* Private function prototypes -----------------------------------------------*/
void SystemClock_Config(void);
static void Error_Handler(void);
static void ADC_Config(void);
#if defined(ADC_TRIGGER_FROM_TIMER)
static void TIM_Config(void);
#endif /* ADC_TRIGGER_FROM_TIMER */
/* Private functions ---------------------------------------------------------*/
/**
* @brief Main program.
* @param None
* @retval None
*/
int main(void)
{
/* STM32F103xB HAL library initialization:
- Configure the Flash prefetch
- Systick timer is configured by default as source of time base, but user
can eventually implement his proper time base source (a general purpose
timer for example or other time source), keeping in mind that Time base
duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
handled in milliseconds basis.
- Set NVIC Group Priority to 4
- Low Level Initialization
*/
HAL_Init();
/* Configure the system clock to 64 MHz */
SystemClock_Config();
/*## Configure peripherals #################################################*/
/* Initialize LED on board */
BSP_LED_Init(LED2);
/* Configure User push-button in Interrupt mode */
BSP_PB_Init(BUTTON_USER, BUTTON_MODE_EXTI);
/* Configure the ADC peripheral */
ADC_Config();
/* Run the ADC calibration */
if (HAL_ADCEx_Calibration_Start(&AdcHandle) != HAL_OK)
{
/* Calibration Error */
Error_Handler();
}
#if defined(ADC_TRIGGER_FROM_TIMER)
/* Configure the TIM peripheral */
TIM_Config();
#endif /* ADC_TRIGGER_FROM_TIMER */
/* Note: This example, on some other STM32 boards, is performing */
/* DAC configuration here. */
/* On STM32F103RB-Nucleo, the device has no DAC available, */
/* therefore analog signal must be supplied externally. */
/*## Enable peripherals ####################################################*/
#if defined(ADC_TRIGGER_FROM_TIMER)
/* Timer enable */
if (HAL_TIM_Base_Start(&TimHandle) != HAL_OK)
{
/* Counter Enable Error */
Error_Handler();
}
#endif /* ADC_TRIGGER_FROM_TIMER */
/* Note: This example, on some other STM32 boards, is performing */
/* DAC signal generation here. */
/* On STM32F103RB-Nucleo, the device has no DAC available, */
/* therefore analog signal must be supplied externally. */
/*## Start ADC conversions #################################################*/
/* Start ADC conversion on regular group with transfer by DMA */
if (HAL_ADC_Start_DMA(&AdcHandle,
(uint32_t *)aADCxConvertedValues,
ADCCONVERTEDVALUES_BUFFER_SIZE
) != HAL_OK)
{
/* Start Error */
Error_Handler();
}
/* Infinite loop */
while (1)
{
/* Turn-on/off LED2 in function of ADC conversion result */
/* - Turn-off if voltage is into AWD window */
/* - Turn-on if voltage is out of AWD window */
/* Variable of analog watchdog status is set into analog watchdog */
/* interrupt callback */
if (ubAnalogWatchdogStatus == RESET)
{
BSP_LED_Off(LED2);
}
else
{
BSP_LED_On(LED2);
/* Reset analog watchdog status for next loop iteration */
ubAnalogWatchdogStatus = RESET;
}
/* For information: ADC conversion results are stored into array */
/* "aADCxConvertedValues" (for debug: check into watch window) */
/* Wait for event on push button to perform following actions */
while ((ubUserButtonClickEvent) == RESET)
{
}
/* Reset variable for next loop iteration */
ubUserButtonClickEvent = RESET;
/* Note: This example, on some other STM32 boards, is performing */
/* DAC signal generation here. */
/* On STM32F103RB-Nucleo, the device has no DAC available, */
/* therefore analog signal must be supplied externally. */
}
}
/**
* @brief System Clock Configuration
* The system Clock is configured as follow :
* System Clock source = PLL (HSI)
* SYSCLK(Hz) = 64000000
* HCLK(Hz) = 64000000
* AHB Prescaler = 1
* APB1 Prescaler = 2
* APB2 Prescaler = 1
* PLLMUL = 16
* Flash Latency(WS) = 2
* @param None
* @retval None
*/
void SystemClock_Config(void)
{
RCC_ClkInitTypeDef clkinitstruct = {0};
RCC_OscInitTypeDef oscinitstruct = {0};
/* Configure PLL ------------------------------------------------------*/
/* PLL configuration: PLLCLK = (HSI / 2) * PLLMUL = (8 / 2) * 16 = 64 MHz */
/* PREDIV1 configuration: PREDIV1CLK = PLLCLK / HSEPredivValue = 64 / 1 = 64 MHz */
/* Enable HSI and activate PLL with HSi_DIV2 as source */
oscinitstruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
oscinitstruct.HSEState = RCC_HSE_OFF;
oscinitstruct.LSEState = RCC_LSE_OFF;
oscinitstruct.HSIState = RCC_HSI_ON;
oscinitstruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
oscinitstruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
oscinitstruct.PLL.PLLState = RCC_PLL_ON;
oscinitstruct.PLL.PLLSource = RCC_PLLSOURCE_HSI_DIV2;
oscinitstruct.PLL.PLLMUL = RCC_PLL_MUL16;
if (HAL_RCC_OscConfig(&oscinitstruct)!= HAL_OK)
{
/* Initialization Error */
while(1);
}
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2
clocks dividers */
clkinitstruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
clkinitstruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
clkinitstruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
clkinitstruct.APB2CLKDivider = RCC_HCLK_DIV1;
clkinitstruct.APB1CLKDivider = RCC_HCLK_DIV2;
if (HAL_RCC_ClockConfig(&clkinitstruct, FLASH_LATENCY_2)!= HAL_OK)
{
/* Initialization Error */
while(1);
}
}
/**
* @brief ADC configuration
* @param None
* @retval None
*/
static void ADC_Config(void)
{
ADC_ChannelConfTypeDef sConfig;
ADC_AnalogWDGConfTypeDef AnalogWDGConfig;
/* Configuration of ADCx init structure: ADC parameters and regular group */
AdcHandle.Instance = ADCx;
AdcHandle.Init.DataAlign = ADC_DATAALIGN_RIGHT;
AdcHandle.Init.ScanConvMode = ADC_SCAN_DISABLE; /* Sequencer disabled (ADC conversion on only 1 channel: channel set on rank 1) */
#if defined ADC_TRIGGER_FROM_TIMER
AdcHandle.Init.ContinuousConvMode = DISABLE; /* Continuous mode disabled to have only 1 conversion at each conversion trig */
#else
AdcHandle.Init.ContinuousConvMode = ENABLE; /* Continuous mode to have maximum conversion speed (no delay between conversions) */
#endif
AdcHandle.Init.NbrOfConversion = 1; /* Parameter discarded because sequencer is disabled */
AdcHandle.Init.DiscontinuousConvMode = DISABLE; /* Parameter discarded because sequencer is disabled */
AdcHandle.Init.NbrOfDiscConversion = 1; /* Parameter discarded because sequencer is disabled */
#if defined ADC_TRIGGER_FROM_TIMER
AdcHandle.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_Tx_TRGO; /* Trig of conversion start done by external event */
#else
AdcHandle.Init.ExternalTrigConv = ADC_SOFTWARE_START; /* Software start to trig the 1st conversion manually, without external event */
#endif
if (HAL_ADC_Init(&AdcHandle) != HAL_OK)
{
/* ADC initialization error */
Error_Handler();
}
/* Configuration of channel on ADCx regular group on sequencer rank 1 */
/* Note: Considering IT occurring after each ADC conversion if ADC */
/* conversion is out of the analog watchdog window selected (ADC IT */
/* enabled), select sampling time and ADC clock with sufficient */
/* duration to not create an overhead situation in IRQHandler. */
sConfig.Channel = ADCx_CHANNELa;
sConfig.Rank = ADC_REGULAR_RANK_1;
sConfig.SamplingTime = ADC_SAMPLETIME_41CYCLES_5;
if (HAL_ADC_ConfigChannel(&AdcHandle, &sConfig) != HAL_OK)
{
/* Channel Configuration Error */
Error_Handler();
}
/* Set analog watchdog thresholds in order to be between steps of DAC */
/* voltage. */
/* - High threshold: between DAC steps 1/2 and 3/4 of full range: */
/* 5/8 of full range (4095 <=> Vdda=3.3V): 2559<=> 2.06V */
/* - Low threshold: between DAC steps 0 and 1/4 of full range: */
/* 1/8 of full range (4095 <=> Vdda=3.3V): 512 <=> 0.41V */
/* Analog watchdog 1 configuration */
AnalogWDGConfig.WatchdogMode = ADC_ANALOGWATCHDOG_ALL_REG;
AnalogWDGConfig.Channel = ADCx_CHANNELa;
AnalogWDGConfig.ITMode = ENABLE;
AnalogWDGConfig.HighThreshold = (RANGE_12BITS * 5/8);
AnalogWDGConfig.LowThreshold = (RANGE_12BITS * 1/8);
if (HAL_ADC_AnalogWDGConfig(&AdcHandle, &AnalogWDGConfig) != HAL_OK)
{
/* Channel Configuration Error */
Error_Handler();
}
}
#if defined(ADC_TRIGGER_FROM_TIMER)
/**
* @brief TIM configuration
* @param None
* @retval None
*/
static void TIM_Config(void)
{
TIM_MasterConfigTypeDef master_timer_config;
RCC_ClkInitTypeDef clk_init_struct = {0}; /* Temporary variable to retrieve RCC clock configuration */
uint32_t latency; /* Temporary variable to retrieve Flash Latency */
uint32_t timer_clock_frequency = 0; /* Timer clock frequency */
uint32_t timer_prescaler = 0; /* Time base prescaler to have timebase aligned on minimum frequency possible */
/* Configuration of timer as time base: */
/* Caution: Computation of frequency is done for a timer instance on APB1 */
/* (clocked by PCLK1) */
/* Timer period can be adjusted by modifying the following constants: */
/* - TIMER_FREQUENCY: timer frequency (unit: Hz). */
/* - TIMER_FREQUENCY_RANGE_MIN: timer minimum frequency (unit: Hz). */
/* Retrieve timer clock source frequency */
HAL_RCC_GetClockConfig(&clk_init_struct, &latency);
/* If APB1 prescaler is different of 1, timers have a factor x2 on their */
/* clock source. */
if (clk_init_struct.APB1CLKDivider == RCC_HCLK_DIV1)
{
timer_clock_frequency = HAL_RCC_GetPCLK1Freq();
}
else
{
timer_clock_frequency = HAL_RCC_GetPCLK1Freq() *2;
}
/* Timer prescaler calculation */
/* (computation for timer 16 bits, additional + 1 to round the prescaler up) */
timer_prescaler = (timer_clock_frequency / (TIMER_PRESCALER_MAX_VALUE * TIMER_FREQUENCY_RANGE_MIN)) +1;
/* Set timer instance */
TimHandle.Instance = TIMx;
/* Configure timer parameters */
TimHandle.Init.Period = ((timer_clock_frequency / (timer_prescaler * TIMER_FREQUENCY)) - 1);
TimHandle.Init.Prescaler = (timer_prescaler - 1);
TimHandle.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
TimHandle.Init.RepetitionCounter = 0x0;
TimHandle.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
if (HAL_TIM_Base_Init(&TimHandle) != HAL_OK)
{
/* Timer initialization Error */
Error_Handler();
}
/* Timer TRGO selection */
master_timer_config.MasterOutputTrigger = TIM_TRGO_UPDATE;
master_timer_config.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
if (HAL_TIMEx_MasterConfigSynchronization(&TimHandle, &master_timer_config) != HAL_OK)
{
/* Timer TRGO selection Error */
Error_Handler();
}
}
#endif /* ADC_TRIGGER_FROM_TIMER */
/* Note: This example, on some other STM32 boards, is performing */
/* DAC configuration here. */
/* On STM32F103RB-Nucleo, the device has no DAC available, */
/* therefore analog signal must be supplied externally. */
/**
* @brief EXTI line detection callbacks
* @param GPIO_Pin: Specifies the pins connected EXTI line
* @retval None
*/
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
{
if (GPIO_Pin == USER_BUTTON_PIN)
{
/* Set variable to report push button event to main program */
ubUserButtonClickEvent = SET;
/* Manage ubUserButtonClickCount to increment it circularly from 0 to */
/* maximum value defined */
if (ubUserButtonClickCount < USERBUTTON_CLICK_COUNT_MAX)
{
ubUserButtonClickCount++;
}
else
{
ubUserButtonClickCount=0;
}
}
}
/**
* @brief Conversion complete callback in non blocking mode
* @param AdcHandle : AdcHandle handle
* @note This example shows a simple way to report end of conversion
* and get conversion result. You can add your own implementation.
* @retval None
*/
void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef *AdcHandle)
{
}
/**
* @brief Conversion DMA half-transfer callback in non blocking mode
* @param hadc: ADC handle
* @retval None
*/
void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc)
{
}
/**
* @brief Analog watchdog callback in non blocking mode.
* @param hadc: ADC handle
* @retval None
*/
void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc)
{
/* Set variable to report analog watchdog out of window status to main */
/* program. */
ubAnalogWatchdogStatus = SET;
}
/**
* @brief ADC error callback in non blocking mode
* (ADC conversion with interruption or transfer by DMA)
* @param hadc: ADC handle
* @retval None
*/
void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc)
{
/* In case of ADC error, call main error handler */
Error_Handler();
}
/**
* @brief This function is executed in case of error occurrence.
* @param None
* @retval None
*/
static void Error_Handler(void)
{
/* User may add here some code to deal with a potential error */
/* In case of error, LED2 is toggling at a frequency of 1Hz */
while(1)
{
/* Toggle LED2 */
BSP_LED_Toggle(LED2);
HAL_Delay(500);
}
}
#ifdef USE_FULL_ASSERT
/**
* @brief Reports the name of the source file and the source line number
* where the assert_param error has occurred.
* @param file: pointer to the source file name
* @param line: assert_param error line source number
* @retval None
*/
void assert_failed(uint8_t *file, uint32_t line)
{
/* User can add his own implementation to report the file name and line number,
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
/* Infinite loop */
while (1)
{
}
}
#endif
/**
* @}
*/
/**
* @}
*/
Reference in New Issue View Git Blame Copy Permalink