mirror of
https://github.com/STMicroelectronics/STM32CubeF1.git
synced 2025-05-01 22:18:06 +08:00
201 lines
6.6 KiB
C
201 lines
6.6 KiB
C
/**
|
|
******************************************************************************
|
|
* @file GPIO/GPIO_IOToggle/Src/main.c
|
|
* @author MCD Application Team
|
|
* @brief This example describes how to configure and use GPIOs through
|
|
* the STM32F1xx HAL API.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
|
* All rights reserved.</center></h2>
|
|
*
|
|
* This software component is licensed by ST under BSD 3-Clause license,
|
|
* the "License"; You may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at:
|
|
* opensource.org/licenses/BSD-3-Clause
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "main.h"
|
|
|
|
/** @addtogroup STM32F1xx_HAL_Examples
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup GPIO_IOToggle
|
|
* @{
|
|
*/
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
static GPIO_InitTypeDef GPIO_InitStruct;
|
|
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
void SystemClock_Config(void);
|
|
|
|
|
|
/* Private functions ---------------------------------------------------------*/
|
|
|
|
/**
|
|
* @brief Main program
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
int main(void)
|
|
{
|
|
/* This sample code shows how to use GPIO HAL API to toggle LED1, LED2, LED3 and LED4 IOs
|
|
in an infinite loop. */
|
|
|
|
/* STM32F107xC HAL library initialization:
|
|
- Configure the Flash prefetch
|
|
- Systick timer is configured by default as source of time base, but user
|
|
can eventually implement his proper time base source (a general purpose
|
|
timer for example or other time source), keeping in mind that Time base
|
|
duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
|
|
handled in milliseconds basis.
|
|
- Set NVIC Group Priority to 4
|
|
- Low Level Initialization
|
|
*/
|
|
HAL_Init();
|
|
|
|
/* Configure the system clock to 72 MHz */
|
|
SystemClock_Config();
|
|
|
|
/* -1- Enable GPIO Clock (to be able to program the configuration registers) */
|
|
LED1_GPIO_CLK_ENABLE();
|
|
LED2_GPIO_CLK_ENABLE();
|
|
LED3_GPIO_CLK_ENABLE();
|
|
LED4_GPIO_CLK_ENABLE();
|
|
|
|
/* -2- Configure IO in output push-pull mode to drive external LEDs */
|
|
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
|
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
|
|
|
GPIO_InitStruct.Pin = LED1_PIN;
|
|
HAL_GPIO_Init(LED1_GPIO_PORT, &GPIO_InitStruct);
|
|
|
|
GPIO_InitStruct.Pin = LED2_PIN;
|
|
HAL_GPIO_Init(LED2_GPIO_PORT, &GPIO_InitStruct);
|
|
|
|
GPIO_InitStruct.Pin = LED3_PIN;
|
|
HAL_GPIO_Init(LED3_GPIO_PORT, &GPIO_InitStruct);
|
|
|
|
GPIO_InitStruct.Pin = LED4_PIN;
|
|
HAL_GPIO_Init(LED4_GPIO_PORT, &GPIO_InitStruct);
|
|
|
|
|
|
/* -3- Toggle IO in an infinite loop */
|
|
while (1)
|
|
{
|
|
HAL_GPIO_TogglePin(LED1_GPIO_PORT, LED1_PIN);
|
|
/* Insert delay 100 ms */
|
|
HAL_Delay(100);
|
|
HAL_GPIO_TogglePin(LED2_GPIO_PORT, LED2_PIN);
|
|
/* Insert delay 100 ms */
|
|
HAL_Delay(100);
|
|
HAL_GPIO_TogglePin(LED3_GPIO_PORT, LED3_PIN);
|
|
/* Insert delay 100 ms */
|
|
HAL_Delay(100);
|
|
HAL_GPIO_TogglePin(LED4_GPIO_PORT, LED4_PIN);
|
|
/* Insert delay 100 ms */
|
|
HAL_Delay(100);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief System Clock Configuration
|
|
* The system Clock is configured as follow :
|
|
* System Clock source = PLL (HSE)
|
|
* SYSCLK(Hz) = 72000000
|
|
* HCLK(Hz) = 72000000
|
|
* AHB Prescaler = 1
|
|
* APB1 Prescaler = 2
|
|
* APB2 Prescaler = 1
|
|
* HSE Frequency(Hz) = 25000000
|
|
* HSE PREDIV1 = 5
|
|
* HSE PREDIV2 = 5
|
|
* PLL2MUL = 8
|
|
* Flash Latency(WS) = 2
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void SystemClock_Config(void)
|
|
{
|
|
RCC_ClkInitTypeDef clkinitstruct = {0};
|
|
RCC_OscInitTypeDef oscinitstruct = {0};
|
|
|
|
/* Configure PLLs ------------------------------------------------------*/
|
|
/* PLL2 configuration: PLL2CLK = (HSE / HSEPrediv2Value) * PLL2MUL = (25 / 5) * 8 = 40 MHz */
|
|
/* PREDIV1 configuration: PREDIV1CLK = PLL2CLK / HSEPredivValue = 40 / 5 = 8 MHz */
|
|
/* PLL configuration: PLLCLK = PREDIV1CLK * PLLMUL = 8 * 9 = 72 MHz */
|
|
|
|
/* Enable HSE Oscillator and activate PLL with HSE as source */
|
|
oscinitstruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
|
oscinitstruct.HSEState = RCC_HSE_ON;
|
|
oscinitstruct.HSEPredivValue = RCC_HSE_PREDIV_DIV5;
|
|
oscinitstruct.Prediv1Source = RCC_PREDIV1_SOURCE_PLL2;
|
|
oscinitstruct.PLL.PLLState = RCC_PLL_ON;
|
|
oscinitstruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
|
oscinitstruct.PLL.PLLMUL = RCC_PLL_MUL9;
|
|
oscinitstruct.PLL2.PLL2State = RCC_PLL2_ON;
|
|
oscinitstruct.PLL2.PLL2MUL = RCC_PLL2_MUL8;
|
|
oscinitstruct.PLL2.HSEPrediv2Value = RCC_HSE_PREDIV2_DIV5;
|
|
if (HAL_RCC_OscConfig(&oscinitstruct)!= HAL_OK)
|
|
{
|
|
/* Initialization Error */
|
|
while(1);
|
|
}
|
|
|
|
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2
|
|
clocks dividers */
|
|
clkinitstruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
|
|
clkinitstruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
|
clkinitstruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
|
clkinitstruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
|
clkinitstruct.APB1CLKDivider = RCC_HCLK_DIV2;
|
|
if (HAL_RCC_ClockConfig(&clkinitstruct, FLASH_LATENCY_2)!= HAL_OK)
|
|
{
|
|
/* Initialization Error */
|
|
while(1);
|
|
}
|
|
}
|
|
|
|
|
|
|
|
#ifdef USE_FULL_ASSERT
|
|
|
|
/**
|
|
* @brief Reports the name of the source file and the source line number
|
|
* where the assert_param error has occurred.
|
|
* @param file: pointer to the source file name
|
|
* @param line: assert_param error line source number
|
|
* @retval None
|
|
*/
|
|
void assert_failed(uint8_t *file, uint32_t line)
|
|
{
|
|
/* User can add his own implementation to report the file name and line number,
|
|
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
|
|
|
/* Infinite loop */
|
|
while (1)
|
|
{
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|