mirror of
https://github.com/STMicroelectronics/STM32CubeF1.git
synced 2025-05-05 19:30:01 +08:00
279 lines
8.2 KiB
C
279 lines
8.2 KiB
C
/**
|
|
******************************************************************************
|
|
* @file RTC/RTC_Tamper/Src/main.c
|
|
* @author MCD Application Team
|
|
* @brief This sample code shows how to use STM32F1xx RTC HAL API to write/read
|
|
* data to/from RTC Backup data registers and demonstrates the Tamper
|
|
* detection feature.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
|
* All rights reserved.</center></h2>
|
|
*
|
|
* This software component is licensed by ST under BSD 3-Clause license,
|
|
* the "License"; You may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at:
|
|
* opensource.org/licenses/BSD-3-Clause
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "main.h"
|
|
|
|
/** @addtogroup STM32F1xx_HAL_Examples
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup RTC_Tamper
|
|
* @{
|
|
*/
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* RTC handler declaration */
|
|
RTC_HandleTypeDef RtcHandle;
|
|
|
|
__IO FlagStatus TamperStatus;
|
|
|
|
/* Backup registers table */
|
|
uint32_t aBKPDataReg[BACKUP_COUNT] =
|
|
{
|
|
RTC_BKP_DR1, RTC_BKP_DR2,
|
|
RTC_BKP_DR3, RTC_BKP_DR4, RTC_BKP_DR5,
|
|
RTC_BKP_DR6, RTC_BKP_DR7, RTC_BKP_DR8,
|
|
RTC_BKP_DR9, RTC_BKP_DR10, RTC_BKP_DR11,
|
|
RTC_BKP_DR12, RTC_BKP_DR13, RTC_BKP_DR14,
|
|
RTC_BKP_DR15, RTC_BKP_DR16, RTC_BKP_DR17,
|
|
RTC_BKP_DR18, RTC_BKP_DR19, RTC_BKP_DR20,
|
|
RTC_BKP_DR21, RTC_BKP_DR22, RTC_BKP_DR23,
|
|
RTC_BKP_DR24, RTC_BKP_DR25, RTC_BKP_DR26,
|
|
RTC_BKP_DR27, RTC_BKP_DR28, RTC_BKP_DR29,
|
|
RTC_BKP_DR30, RTC_BKP_DR31, RTC_BKP_DR32,
|
|
RTC_BKP_DR33, RTC_BKP_DR34, RTC_BKP_DR35,
|
|
RTC_BKP_DR36, RTC_BKP_DR37, RTC_BKP_DR38,
|
|
RTC_BKP_DR39, RTC_BKP_DR40, RTC_BKP_DR41,
|
|
RTC_BKP_DR42
|
|
};
|
|
|
|
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
void SystemClock_Config(void);
|
|
|
|
/* Private functions ---------------------------------------------------------*/
|
|
|
|
/**
|
|
* @brief Main program
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
int main(void)
|
|
{
|
|
uint32_t index = 0;
|
|
RTC_TamperTypeDef stamperstructure;
|
|
|
|
/* STM32F103xG HAL library initialization:
|
|
- Configure the Flash prefetch
|
|
- Systick timer is configured by default as source of time base, but user
|
|
can eventually implement his proper time base source (a general purpose
|
|
timer for example or other time source), keeping in mind that Time base
|
|
duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
|
|
handled in milliseconds basis.
|
|
- Set NVIC Group Priority to 4
|
|
- Low Level Initialization
|
|
*/
|
|
HAL_Init();
|
|
|
|
/* Configure the system clock to 72 MHz */
|
|
SystemClock_Config();
|
|
|
|
/* Configure LED1, LED2, LED3 and LED4 */
|
|
BSP_LED_Init(LED1);
|
|
BSP_LED_Init(LED2);
|
|
BSP_LED_Init(LED3);
|
|
BSP_LED_Init(LED4);
|
|
|
|
/* Configure Key push-button button */
|
|
BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_GPIO);
|
|
|
|
/*##-1- Configure the RTC peripheral #######################################*/
|
|
/* Configure RTC prescaler and RTC data registers */
|
|
/* RTC configured as follow:
|
|
- Asynch Prediv = Calculated automatically by HAL */
|
|
RtcHandle.Instance = RTC;
|
|
RtcHandle.Init.AsynchPrediv = RTC_AUTO_1_SECOND;
|
|
|
|
if (HAL_RTC_Init(&RtcHandle) != HAL_OK)
|
|
{
|
|
/* Initialization Error */
|
|
Error_Handler();
|
|
}
|
|
|
|
/*##-2- Configure RTC Tamper ###############################################*/
|
|
stamperstructure.Tamper = RTC_TAMPER_1;
|
|
stamperstructure.Trigger = RTC_TAMPERTRIGGER_LOWLEVEL;
|
|
|
|
if (HAL_RTCEx_SetTamper_IT(&RtcHandle, &stamperstructure) != HAL_OK)
|
|
{
|
|
/* Initialization Error */
|
|
Error_Handler();
|
|
}
|
|
|
|
/* Clear the Tamper interrupt pending bit */
|
|
__HAL_RTC_TAMPER_CLEAR_FLAG(&RtcHandle,RTC_FLAG_TAMP1F);
|
|
|
|
/*##-3- Write Data on the Back Up registers ################################*/
|
|
for (index = 0; index < BACKUP_COUNT; index++)
|
|
{
|
|
HAL_RTCEx_BKUPWrite(&RtcHandle, aBKPDataReg[index], 0xDF59 + (index * 0x5A));
|
|
}
|
|
|
|
/*##-4- Check Data is stored on the Back Up registers ######################*/
|
|
for (index = 0; index < BACKUP_COUNT; index++)
|
|
{
|
|
if (HAL_RTCEx_BKUPRead(&RtcHandle, aBKPDataReg[index]) != (0xDF59 + (index * 0x5A)))
|
|
{
|
|
Error_Handler();
|
|
}
|
|
}
|
|
|
|
/* Turn LED2 on */
|
|
BSP_LED_On(LED2);
|
|
|
|
/* Reset flag after writing of backup register in order to wait for new button press */
|
|
TamperStatus = RESET;
|
|
|
|
/*##-5- Wait for the tamper button is pressed ##############################*/
|
|
while (TamperStatus != SET);
|
|
|
|
/*##-6- Deactivate the tamper ##############################*/
|
|
HAL_RTCEx_DeactivateTamper(&RtcHandle, RTC_TAMPER_1);
|
|
|
|
/*##-7- Check Data is cleared on the Back Up registers #####################*/
|
|
for (index = 0; index < BACKUP_COUNT; index++)
|
|
{
|
|
if (HAL_RTCEx_BKUPRead(&RtcHandle, aBKPDataReg[index]) != 0x00)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
}
|
|
|
|
/* Infinite loop */
|
|
while (1)
|
|
{
|
|
/* Turn LED4 on */
|
|
BSP_LED_Toggle(LED4);
|
|
|
|
/* Delay */
|
|
HAL_Delay(100);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief System Clock Configuration
|
|
* The system Clock is configured as follow :
|
|
* System Clock source = PLL (HSE)
|
|
* SYSCLK(Hz) = 72000000
|
|
* HCLK(Hz) = 72000000
|
|
* AHB Prescaler = 1
|
|
* APB1 Prescaler = 2
|
|
* APB2 Prescaler = 1
|
|
* HSE Frequency(Hz) = 8000000
|
|
* HSE PREDIV1 = 1
|
|
* PLLMUL = 9
|
|
* Flash Latency(WS) = 2
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void SystemClock_Config(void)
|
|
{
|
|
RCC_ClkInitTypeDef clkinitstruct = {0};
|
|
RCC_OscInitTypeDef oscinitstruct = {0};
|
|
|
|
/* Enable HSE Oscillator and activate PLL with HSE as source */
|
|
oscinitstruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
|
oscinitstruct.HSEState = RCC_HSE_ON;
|
|
oscinitstruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
|
|
oscinitstruct.PLL.PLLState = RCC_PLL_ON;
|
|
oscinitstruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
|
oscinitstruct.PLL.PLLMUL = RCC_PLL_MUL9;
|
|
if (HAL_RCC_OscConfig(&oscinitstruct)!= HAL_OK)
|
|
{
|
|
/* Initialization Error */
|
|
while(1);
|
|
}
|
|
|
|
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2
|
|
clocks dividers */
|
|
clkinitstruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
|
|
clkinitstruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
|
clkinitstruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
|
clkinitstruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
|
clkinitstruct.APB1CLKDivider = RCC_HCLK_DIV2;
|
|
if (HAL_RCC_ClockConfig(&clkinitstruct, FLASH_LATENCY_2)!= HAL_OK)
|
|
{
|
|
/* Initialization Error */
|
|
while(1);
|
|
}
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief This function is executed in case of error occurrence.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void Error_Handler(void)
|
|
{
|
|
/* Turn LED3 on */
|
|
BSP_LED_On(LED3);
|
|
while (1)
|
|
{
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Tamper event callback function
|
|
* @param RTC handle
|
|
* @retval None
|
|
*/
|
|
void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc)
|
|
{
|
|
/* LED1 On: Tamper button pressed */
|
|
BSP_LED_On(LED1);
|
|
}
|
|
|
|
#ifdef USE_FULL_ASSERT
|
|
|
|
/**
|
|
* @brief Reports the name of the source file and the source line number
|
|
* where the assert_param error has occurred.
|
|
* @param file: pointer to the source file name
|
|
* @param line: assert_param error line source number
|
|
* @retval None
|
|
*/
|
|
void assert_failed(uint8_t *file, uint32_t line)
|
|
{
|
|
/* User can add his own implementation to report the file name and line number,
|
|
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
|
|
|
/* Infinite loop */
|
|
while (1)
|
|
{
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|