mirror of
https://github.com/STMicroelectronics/STM32CubeF1.git
synced 2025-05-08 19:29:51 +08:00
63 lines
2.3 KiB
Plaintext
63 lines
2.3 KiB
Plaintext
/**
|
|
@page GPIO_InfiniteLedToggling GPIO example
|
|
|
|
@verbatim
|
|
******************** (C) COPYRIGHT 2016 STMicroelectronics *******************
|
|
* @file Examples_LL/GPIO/GPIO_InfiniteLedToggling/readme.txt
|
|
* @author MCD Application Team
|
|
* @brief Description of the GPIO example.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
|
* All rights reserved.</center></h2>
|
|
*
|
|
* This software component is licensed by ST under BSD 3-Clause license,
|
|
* the "License"; You may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at:
|
|
* opensource.org/licenses/BSD-3-Clause
|
|
*
|
|
******************************************************************************
|
|
@endverbatim
|
|
|
|
@par Example Description
|
|
|
|
How to configure and use GPIOs to toggle the on-board user LEDs
|
|
every 250 ms. This example is based on the STM32F1xx LL API. The peripheral
|
|
is initialized with LL unitary service functions to optimize
|
|
for performance and size.
|
|
|
|
PA.05 IO (configured in output pushpull mode) toggles in a forever loop.
|
|
On STM32F103RB-Nucleo board this IO is connected to LED2.
|
|
|
|
In this example, HCLK is configured at 72 MHz.
|
|
|
|
|
|
@par Directory contents
|
|
|
|
- GPIO/GPIO_InfiniteLedToggling/Inc/stm32f1xx_it.h Interrupt handlers header file
|
|
- GPIO/GPIO_InfiniteLedToggling/Inc/main.h Header for main.c module
|
|
- GPIO/GPIO_InfiniteLedToggling/Inc/stm32_assert.h Template file to include assert_failed function
|
|
- GPIO/GPIO_InfiniteLedToggling/Src/stm32f1xx_it.c Interrupt handlers
|
|
- GPIO/GPIO_InfiniteLedToggling/Src/main.c Main program
|
|
- GPIO/GPIO_InfiniteLedToggling/Src/system_stm32f1xx.c STM32F1xx system source file
|
|
|
|
|
|
@par Hardware and Software environment
|
|
|
|
- This example runs on STM32F103xB devices.
|
|
|
|
- This example has been tested with STM32F103RB-Nucleo board and can be
|
|
easily tailored to any other supported device and development board.
|
|
|
|
|
|
@par How to use it ?
|
|
|
|
In order to make the program work, you must do the following :
|
|
- Open your preferred toolchain
|
|
- Rebuild all files and load your image into target memory
|
|
- Run the example
|
|
|
|
* <h3><center>© COPYRIGHT STMicroelectronics</center></h3>
|
|
*/
|