mirror of
https://github.com/STMicroelectronics/STM32CubeF0.git
synced 2025-05-06 19:29:12 +08:00
87 lines
3.3 KiB
Plaintext
87 lines
3.3 KiB
Plaintext
/**
|
|
@page ADC_TemperatureSensor ADC example
|
|
|
|
@verbatim
|
|
******************** (C) COPYRIGHT 2016 STMicroelectronics *******************
|
|
* @file Examples_LL/ADC/ADC_TemperatureSensor/readme.txt
|
|
* @author MCD Application Team
|
|
* @brief Description of the ADC_TemperatureSensor example.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
|
* All rights reserved.</center></h2>
|
|
*
|
|
* This software component is licensed by ST under BSD 3-Clause license,
|
|
* the "License"; You may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at:
|
|
* opensource.org/licenses/BSD-3-Clause
|
|
*
|
|
******************************************************************************
|
|
@endverbatim
|
|
|
|
@par Example Description
|
|
|
|
How to use an ADC peripheral to perform a single ADC conversion on the
|
|
internal temperature sensor and calculate the temperature in degrees Celsius.
|
|
This example uses the polling programming model (for interrupt or DMA
|
|
programming models, refer to other examples).
|
|
This example is based on the STM32F0xx ADC LL API.
|
|
The peripheral initialization is done using LL unitary service functions
|
|
for optimization purposes (performance and size).
|
|
|
|
Example configuration:
|
|
ADC is configured to convert a single channel, in single conversion mode,
|
|
from SW trigger.
|
|
Sequencer of group regular (default group available on ADC of all STM32 devices)
|
|
is configured to convert 1 channel: internal channel temperature sensor.
|
|
|
|
Example execution:
|
|
At each press on push button, the ADC performs 1 conversion of the selected channel.
|
|
Software polls for conversion completion.
|
|
When conversion is completed, main program reads conversion data
|
|
from ADC data register and stores it into a variable, LED is turned on.
|
|
|
|
ADC conversions raw data are computed to physical values
|
|
using LL ADC driver helper macro:
|
|
- Value of temperature (unit: degree Celcius)
|
|
|
|
For debug: variables to monitor with debugger watch window:
|
|
- "uhADCxConvertedData": ADC group regular conversion data
|
|
- "hADCxConvertedData_Temperature_DegreeCelsius": Value of temperature (unit: degree Celcius)
|
|
|
|
Connection needed:
|
|
None.
|
|
|
|
Other peripherals used:
|
|
1 GPIO for push button
|
|
1 GPIO for LED
|
|
|
|
@par Directory contents
|
|
|
|
- ADC/ADC_TemperatureSensor/Inc/stm32f0xx_it.h Interrupt handlers header file
|
|
- ADC/ADC_TemperatureSensor/Inc/main.h Header for main.c module
|
|
- ADC/ADC_TemperatureSensor/Inc/stm32_assert.h Template file to include assert_failed function
|
|
- ADC/ADC_TemperatureSensor/Src/stm32f0xx_it.c Interrupt handlers
|
|
- ADC/ADC_TemperatureSensor/Src/main.c Main program
|
|
- ADC/ADC_TemperatureSensor/Src/system_stm32f0xx.c STM32F0xx system source file
|
|
|
|
|
|
@par Hardware and Software environment
|
|
|
|
- This example runs on STM32F072xx devices.
|
|
|
|
- This example has been tested with STM32F072RB-Nucleo RevC board and can be
|
|
easily tailored to any other supported device and development board.
|
|
|
|
|
|
@par How to use it ?
|
|
|
|
In order to make the program work, you must do the following :
|
|
- Open your preferred toolchain
|
|
- Rebuild all files and load your image into target memory
|
|
- Run the example
|
|
|
|
* <h3><center>© COPYRIGHT STMicroelectronics</center></h3>
|
|
*/
|