mirror of
https://github.com/STMicroelectronics/STM32CubeF0.git
synced 2025-05-08 19:29:49 +08:00
110 lines
4.9 KiB
Plaintext
110 lines
4.9 KiB
Plaintext
/**
|
|
@page ADC_MultiChannelSingleConversion ADC example
|
|
|
|
@verbatim
|
|
******************** (C) COPYRIGHT 2016 STMicroelectronics *******************
|
|
* @file Examples_LL/ADC/ADC_MultiChannelSingleConversion/readme.txt
|
|
* @author MCD Application Team
|
|
* @brief Description of the ADC_MultiChannelSingleConversion example.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
|
* All rights reserved.</center></h2>
|
|
*
|
|
* This software component is licensed by ST under BSD 3-Clause license,
|
|
* the "License"; You may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at:
|
|
* opensource.org/licenses/BSD-3-Clause
|
|
*
|
|
******************************************************************************
|
|
@endverbatim
|
|
|
|
@par Example Description
|
|
|
|
How to use an ADC peripheral to convert several channels. ADC conversions are
|
|
performed successively in a scan sequence.
|
|
This example is based on the STM32F0xx ADC LL API.
|
|
The peripheral initialization is done using LL unitary service functions
|
|
for optimization purposes (performance and size).
|
|
|
|
Example configuration:
|
|
ADC is configured in single conversion mode, from SW trigger.
|
|
Sequencer of group regular (default group available on ADC of all STM32 devices)
|
|
is configured to convert 3 channels: 1 channel from GPIO, 2 internal channels:
|
|
temperature sensor and VrefInt.
|
|
DMA is configured to transfer conversion data in an array of size three (one array
|
|
address for conversion data of each channel), in circular mode to update
|
|
results array at each ADC sequence conversions.
|
|
|
|
Example execution:
|
|
At each press on push button, the ADC executes the scan sequence:
|
|
ADC performs conversion of the three selected channels successively,
|
|
in burst (discontinuous mode not enabled).
|
|
The 3 ADC conversions data are transferred by DMA into the results array
|
|
"aADCxConvertedData".
|
|
ADC conversion data of each sequence rank is at an address of the array:
|
|
- aADCxConvertedData[0]: ADC channel set on rank1 (GPIO as analog input)
|
|
- aADCxConvertedData[2]: ADC channel set on rank3 (VrefInt)
|
|
- aADCxConvertedData[1]: ADC channel set on rank2 (Temperature sensor)
|
|
LED is turned on when ADC conversions and DMA transfer of the sequence
|
|
are completed.
|
|
|
|
ADC conversions raw data are computed to physical values
|
|
using LL ADC driver helper macro:
|
|
- Value of voltage on GPIO pin (on which is mapped ADC channel) (unit: mV)
|
|
- Value of internal voltage reference VrefInt (unit: mV)
|
|
- Value of temperature (unit: degree Celcius)
|
|
- Value of analog reference voltage (Vref+), connected to analog voltage supply Vdda (unit: mV)
|
|
|
|
For debug: variables to monitor with debugger watch window:
|
|
- "aADCxConvertedData": ADC group regular conversion data
|
|
- "ubDmaTransferStatus": status of DMA transfer of ADC group regular conversions
|
|
- "uhADCxConvertedData_VoltageGPIO_mVolt": Value of voltage on GPIO pin (on which is mapped ADC channel) (unit: mV)
|
|
- "uhADCxConvertedData_VrefInt_mVolt": Value of internal voltage reference VrefInt (unit: mV)
|
|
- "hADCxConvertedData_Temperature_DegreeCelsius": Value of temperature (unit: degree Celcius)
|
|
- "uhADCxConvertedData_VrefAnalog_mVolt": Value of analog reference voltage (Vref+), connected to analog voltage supply Vdda (unit: mV)
|
|
|
|
Connection needed:
|
|
None.
|
|
Note: Optionally, a voltage can be supplied to the analog input pin (cf pin below),
|
|
between 0V and Vdda=3.3V, to perform a ADC conversion on a determined
|
|
voltage level.
|
|
Otherwise, this pin can be let floating (in this case ADC conversion data
|
|
will be undetermined).
|
|
|
|
Other peripherals used:
|
|
1 GPIO for push button
|
|
1 GPIO for LED
|
|
1 GPIO for analog input: PA.04 (Arduino connector CN8 pin A2, Morpho connector CN7 pin 32)
|
|
DMA
|
|
|
|
|
|
@par Directory contents
|
|
|
|
- ADC/ADC_MultiChannelSingleConversion/Inc/stm32f0xx_it.h Interrupt handlers header file
|
|
- ADC/ADC_MultiChannelSingleConversion/Inc/main.h Header for main.c module
|
|
- ADC/ADC_MultiChannelSingleConversion/Inc/stm32_assert.h Template file to include assert_failed function
|
|
- ADC/ADC_MultiChannelSingleConversion/Src/stm32f0xx_it.c Interrupt handlers
|
|
- ADC/ADC_MultiChannelSingleConversion/Src/main.c Main program
|
|
- ADC/ADC_MultiChannelSingleConversion/Src/system_stm32f0xx.c STM32F0xx system source file
|
|
|
|
|
|
@par Hardware and Software environment
|
|
|
|
- This example runs on STM32F072xx devices.
|
|
|
|
- This example has been tested with STM32F072RB-Nucleo RevC board and can be
|
|
easily tailored to any other supported device and development board.
|
|
|
|
|
|
@par How to use it ?
|
|
|
|
In order to make the program work, you must do the following :
|
|
- Open your preferred toolchain
|
|
- Rebuild all files and load your image into target memory
|
|
- Run the example
|
|
|
|
* <h3><center>© COPYRIGHT STMicroelectronics</center></h3>
|
|
*/
|