STM32CubeF0

@verbatim
******************** (C) COPYRIGHT 2016 STMicroelectronics *******************
* @file ADC/ADC_RegularConversion_Polling/readme.txt
* @author MCD Application Team
* @brief Description of the ADC RegularConversion Polling example.
******************************************************************************
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
@endverbatim

@par Example Description

How to use the ADC in Polling mode to convert data through the HAL API.

When the end of conversion occurs, the converted data of ADC1 DR register is
affected to the uhADCxConvertedValue variable.

Conversion time (reference manual, Reset and Clock control part):
The function SystemClock_Config() configures the clock divider as follows:
1) The system clock is 48MHz.
2) AHB Prescaler = 1 => AHB clock is 48 MHz.
2) APB Prescaler = 1 => APB clock is 48 MHz.
3) ADC Prescaler = 4 => ADC clock is 12 MHz. (14 Mhz max)

Sampling time is set to ADC_SAMPLETIME_28CYCLES_5 (28.5 cycles).
ConvTime = Sampling time + 12.5 ADC clock cycles.
= 41 clock cycles
= 3.42 us

User can vary the ADC_CHANNEL_10 voltage using the Eval Board potentiometer (RV3) connected to PC.00.
The converted value is monitored through debugger: uhADCxConvertedValue variable.

STM32 Eval board's LEDs can be used to monitor the transfer status:
- LED3 is ON when there is an error in initialization.

@par Directory contents

- ADC/ADC_RegularConversion_Polling/Inc/stm32f0xx_hal_conf.h HAL configuration file
- ADC/ADC_RegularConversion_Polling/Inc/stm32f0xx_it.h Interrupt handlers header file
- ADC/ADC_RegularConversion_Polling/Inc/main.h Header for main.c module
- ADC/ADC_RegularConversion_Polling/Src/stm32f0xx_it.c Interrupt handlers
- ADC/ADC_RegularConversion_Polling/Src/main.c Main program
- ADC/ADC_RegularConversion_Polling/Src/stm32f0xx_hal_msp.c HAL MSP file
- ADC/ADC_RegularConversion_Polling/Src/system_stm32f0xx.c STM32F0xx system source file

@par Hardware and Software environment

- This example runs on STM32F0xx devices.

- This example has been tested with STM32091C-EVAL board and can be
easily tailored to any other supported device and development board.

@par How to use it ?

In order to make the program work, you must do the following :
- Open your preferred toolchain
- Rebuild all files and load your image into target memory
- Run the example