mirror of
https://github.com/STMicroelectronics/STM32CubeF0.git
synced 2025-05-07 19:29:11 +08:00
66 lines
2.7 KiB
Plaintext
66 lines
2.7 KiB
Plaintext
/**
|
|
@page WWDG_RefreshUntilUserEvent WWDG example
|
|
|
|
@verbatim
|
|
******************** (C) COPYRIGHT 2016 STMicroelectronics *******************
|
|
* @file Examples_LL/WWDG/WWDG_RefreshUntilUserEvent/readme.txt
|
|
* @author MCD Application Team
|
|
* @brief Description of the WWDG_RefreshUntilUserEvent example.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
|
* All rights reserved.</center></h2>
|
|
*
|
|
* This software component is licensed by ST under BSD 3-Clause license,
|
|
* the "License"; You may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at:
|
|
* opensource.org/licenses/BSD-3-Clause
|
|
*
|
|
******************************************************************************
|
|
@endverbatim
|
|
|
|
@par Example Description
|
|
|
|
Configuration of the WWDG to periodically update the counter and
|
|
generate an MCU WWDG reset when a user button is pressed. The peripheral initialization
|
|
uses the LL unitary service functions for optimization purposes (performance and size).
|
|
|
|
Example Configuration:
|
|
Configure the WWDG (Window, Prescaler & Counter) and enable it.
|
|
Refresh the WWDG downcounter in the main loop - Led is blinking fastly & continuously
|
|
|
|
Example Execution:
|
|
When User Button is pressed, the Downcounter automatic refresh mechanism is disable and thus, reset will occur.
|
|
After a reset when re-entering in the main, RCC WWDG Reset Flag will be checked and if we are back from a WWDG reset the led will be switch ON.
|
|
|
|
Waiting a new user button pressed to re-activate the WWDG
|
|
|
|
@par Directory contents
|
|
|
|
- WWDG/WWDG_RefreshUntilUserEvent/Inc/stm32f0xx_it.h Interrupt handlers header file
|
|
- WWDG/WWDG_RefreshUntilUserEvent/Inc/main.h Header for main.c module
|
|
- WWDG/WWDG_RefreshUntilUserEvent/Inc/stm32_assert.h Template file to include assert_failed function
|
|
- WWDG/WWDG_RefreshUntilUserEvent/Src/stm32f0xx_it.c Interrupt handlers
|
|
- WWDG/WWDG_RefreshUntilUserEvent/Src/main.c Main program
|
|
- WWDG/WWDG_RefreshUntilUserEvent/Src/system_stm32f0xx.c STM32F0xx system source file
|
|
|
|
|
|
@par Hardware and Software environment
|
|
|
|
- This example runs on STM32F072xB devices.
|
|
|
|
- This example has been tested with STM32F072RB-Nucleo RevC board and can be
|
|
easily tailored to any other supported device and development board.
|
|
|
|
|
|
@par How to use it ?
|
|
|
|
In order to make the program work, you must do the following :
|
|
- Open your preferred toolchain
|
|
- Rebuild all files and load your image into target memory
|
|
- Run the example
|
|
|
|
* <h3><center>© COPYRIGHT STMicroelectronics</center></h3>
|
|
*/
|