/**
  ******************************************************************************
  * @file    HAL/HAL_TimeBase_TIM/Src/main.c 
  * @author  MCD Application Team
  * @brief   This example describes how to configure HAL time base using
  *          the STM32F0xx HAL API.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
  * All rights reserved.</center></h2>
  *
  * This software component is licensed by ST under BSD 3-Clause license,
  * the "License"; You may not use this file except in compliance with the
  * License. You may obtain a copy of the License at:
  *                        opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  */

/* Includes ------------------------------------------------------------------*/
#include "main.h"

/** @addtogroup STM32F0xx_HAL_Examples
  * @{
  */

/** @addtogroup HAL_TimeBase_TIM
  * @{
  */ 

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
uint32_t uwIncrementState = 0;
/* Private function prototypes -----------------------------------------------*/
static void SystemClock_Config(void);


/* Private functions ---------------------------------------------------------*/

/**
  * @brief  Main program
  * @param  None
  * @retval None
  */
int main(void)
{
 /* This sample code shows how to configure The HAL time base source base with a 
    dedicated  Tick interrupt priority.
    A general purpose timer(TIM6) is used instead of Systick  as source of  time base.  
    Time base duration is fixed to 1ms  since PPP_TIMEOUT_VALUEs are defined and 
    handled in milliseconds basis.
    */



  /* STM32F0xx HAL library initialization:
       - Configure the Flash prefetch
       - Configure timer (TIM6) to generate an interrupt each 1 msec
       - Set NVIC Group Priority to 4
       - Low Level Initialization
     */

  HAL_Init();
  
  /* Configure the system clock to 48 MHz */
  SystemClock_Config();
  
  /* Configure LED2 */
  BSP_LED_Init(LED2);  
  
  /* Configure User push-button */
  BSP_PB_Init(BUTTON_USER, BUTTON_MODE_EXTI);

  /* Insert a Delay of 1000 ms and toggle LED2, in an infinite loop */  
  while (1)
  {
    /* Insert a 1s delay */
    HAL_Delay(1000);
    
    /* Toggle LED2 */
    BSP_LED_Toggle(LED2);
  }
}

/**
  * @brief EXTI line detection callback.
  * @param GPIO_Pin: Specifies the pins connected EXTI line
  * @retval None
  */
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
{
  if(GPIO_Pin == USER_BUTTON_PIN)
  {
    if (uwIncrementState == 0)
    {
      /* Suspend tick increment */
      HAL_SuspendTick();
      
      /* Change the Push button state */
      uwIncrementState = 1;
    }
    else
    {
      /* Resume tick increment */
      HAL_ResumeTick();
      
      /* Change the Push button state */
      uwIncrementState = 0;
    }
  }  
}

/**
  * @brief  System Clock Configuration
  *         The system Clock is configured as follow : 
  *            System Clock source            = PLL (HSI)
  *            SYSCLK(Hz)                     = 48000000
  *            HCLK(Hz)                       = 48000000
  *            AHB Prescaler                  = 1
  *            APB1 Prescaler                 = 1
  *            HSI Frequency(Hz)              = 8000000
  *            PREDIV                         = 2
  *            PLLMUL                         = 12
  *            Flash Latency(WS)              = 1
  * @param  None
  * @retval None
  */
void SystemClock_Config(void)
{
  RCC_ClkInitTypeDef RCC_ClkInitStruct;
  RCC_OscInitTypeDef RCC_OscInitStruct;
  
  /* No HSE Oscillator on Nucleo, Activate PLL with HSI as source */
  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_NONE;
  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
  RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV2;
  RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL12;
  if (HAL_RCC_OscConfig(&RCC_OscInitStruct)!= HAL_OK)
  {
    /* Initialization Error */
    while(1); 
  }

  /* Select PLL as system clock source and configure the HCLK, PCLK1 clocks dividers */
  RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1);
  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1)!= HAL_OK)
  {
    /* Initialization Error */
    while(1); 
  }
}

#ifdef  USE_FULL_ASSERT

/**
  * @brief  Reports the name of the source file and the source line number
  *         where the assert_param error has occurred.
  * @param  file: pointer to the source file name
  * @param  line: assert_param error line source number
  * @retval None
  */
void assert_failed(uint8_t* file, uint32_t line)
{ 
  /* User can add his own implementation to report the file name and line number,
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */

  /* Infinite loop */
  while (1)
  {
  }
}
#endif

/**
  * @}
  */ 

/**
  * @}
  */ 

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/